Differential scanning calorimetry

About: Differential scanning calorimetry is a research topic. Over the lifetime, 50315 publications have been published within this topic receiving 1152335 citations. The topic is also known as: DSC.

The melting behavior of organic materials confined in porous solids

Abstract: The solid–liquidphase transition temperatures and heats of fusion ΔH f of nonpolar organic solids confined in the pores of controlled pore glasses were measured by differential scanning calorimetry. The pore diameters d were in the range of 40–730 A and the organics studied were cis‐decalin, trans‐decalin, cyclohexane, benzene, chlorobenzene, naphthalene, and heptane. In accordance with previous reports on studies of primarily inorganic materials, the melting point of the pore solidT(d) decreased with decreasing pore diameter. In addition, a large reduction in the bulk enthalpy of fusion ΔH f of the pore solid was measured, which apparently has not been studied in detail by other workers. A linear correlation was found between the melting point depression (ΔT m ) and the reciprocal diameter, as predicted by theories of solidification in a capillary. The calculated values of the solid–liquid interfacial energy σsl were in reasonable agreement with values reported in the literature based on other methods of measurement.

Determination of the α, β, and γ crystalline phases of poly(vinylidene fluoride) films prepared at different conditions

Abstract: Samples containing the three crystalline phases of poly(vinylidene fluoride), α, β, and γ, have been obtained under distinct crystallization conditions. Samples containing exclusively unoriented β phase have been obtained by crystallization from dimethylformamide (DMF) solution at 60°C. Oriented β phase has been obtained by uniaxial drawing, at 80°C, of an originally α phase sample. Samples containing exclusively α phase have been obtained by melting and posterior cooling at room temperature. Samples containing both α and γ phases have been obtained by melt crystallization at 164 °C for 16 and 36 h. Presence of the crystalline phases in each sample were confirmed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXD), polarized light optical microscopy (PLOM), and scanning electron microscopy (SEM). Infrared absorption bands identifying unequivocally the presence of β and γ phases in a sample are presented. It is shown that solution crystallization at T < 70°C always results in the β phase, regardless of the solvent used. Melt temperatures of the respective phases have also been determined. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3272–3279, 2006

Phase transitions and phase separations in phospholipid membranes induced by changes in temperature, pH, and concentration of bivalent cations.

Abstract: Differential scanning calorimetry (DSC) and fluorescence polarization of embedded probe molecules were used to detect phase behavior of various phospholipids. The techniques were directly compared for detecting the transition of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidic acid (DPPA) dispersed in aqueous salt solutions. Excellent agreement occurred in the case of phosphatidylcholine; however, in the case of phosphatidic acid, at pH 6.5, transitions detected by fluorescence polarization using the disc-like perylene molecule occurred about 10 degrees lower than those detected by DSC. Discrepancy between fluorescence and DSC methods is eliminated by using a rod-like molecule, diphenylhexatriene (DPH). Both techniques show that doubly ionizing the phosphate group reduces the Tc by about 9 degrees. Direct pH titration of fluidity can be accomplished and this effect is most dramatic when membranes are in their transition temperature range (ca. 50 degrees). Phosphatidic acid transitions occur at higher temperatures, and have appreciably lower transition enthalpies and entropies than phosphatidylcholine. These effect could not be explained simply on the basis of double layer electrostatics and several other factors were discussed in an attempt to rationalize the results. Addition of monovalent cations (0.01-0.5 M) is shown to increase the Tc of dipalmitoylphosphatidylglycerol by less than 3 degrees. However, addition of (1 x 10-3 M) Ca2+ abolishes the phase transition of both phosphatidyglycerol and phosphatidylserine in the range 0-70 degrees. Preliminary X-ray evidence indicates the phosphatidylserine-Ca2+ bilayers are in a crystalline state at 24 degrees. In contrast, 5 x 10-3 M Mg2+ only broadens the transition and increases the Tc indicating a considerable difference between the effects of Ca2+ and Mg2+. Neutralization of PS increases the Tc from 6 degrees (at pH 7.4) to 20-26 degrees (at pH 2.5-3.0) but does not abolish the transition, suggesting the Ca2+ effect involves more than charge neutralization. Addition of Ca2+ to mixed phosphatidylserine-phosphatidylcholine dispersions, induces a phase separation of the dipalmitoyl- (and also distearoyl-) phosphatidylcholine as seen by the appearance of a new endothermic peak at 41 degrees (58 degrees). Similarly, in mixed (dipalmitoyl) phosphatidic acid-phosphatidylcholine (2:1) dispersions, Ca2+ again can separate the phosphatidylcholine component.