Digital camera

About: Digital camera is a research topic. Over the lifetime, 12169 publications have been published within this topic receiving 137431 citations. The topic is also known as: digicam & digital still camera.

Quality of 3d point clouds from highly overlapping uav imagery

Abstract: UAVs are becoming standard platforms for photogrammetric data capture especially while aiming at large scale aerial mapping for areas of limited extent. Such applications especially benefit from the very reasonable price of a small light UAS including control system and standard consumer grade digital camera, which is some orders of magnitude lower compared to digital photogrammetric systems. Within the paper the capability of UAV-based data collection will be evaluated for two different consumer camera systems and compared to an aerial survey with a state-of-the-art digital airborne camera system. During this evaluation, the quality of 3D point clouds generated by dense multiple image matching will be used as a benchmark. Also due to recent software developments such point clouds can be generated at a resolution similar to the ground sampling distance of the available imagery and are used for an increasing number of applications. Usually, image matching benefits from the good images quality as provided from digital airborne camera systems, which is frequently not available from the low-cost sensor components used for UAV image collection. Within the paper an investigation on UAV-based 3D data capture will be presented. For this purpose dense 3D point clouds are generated for a test area from three different platforms: first a UAV with a light weight compact camera, second a system using a system camera and finally a medium-format airborne digital camera system. Despite the considerable differences in system costs, suitable results can be derived from all data, especially if large redundancy is available such highly overlapping image blocks are not only beneficial during georeferencing, but are especially advantageous while aiming at a dense and accurate image based 3D surface reconstruction.

Panoramic indexing camera mount

Abstract: Systems, particularly cameras and mounts, for capturing images of a panorama to allow the combination of the images into a continuous image are disclosed. In particular the invention is directed to mounts that rotate image capturing devices such that the images may be electronically stitched together. One such mount includes a base, which can be held on a tripod, and a frame rotatably connected to the base for supporting an image capturing device. Usually, such image capturing device is a chemical-film or digital camera. In some applications, a video camera will be useful of photographing a panorama at high speed. The mount has a rotational advance system that enables the rotation of the frame through discrete angles through 360°. The frame may have a fordable arm for carrying an image capturing device in both a portrait and landscape orientation. High speed systems are also disclosed that use controllers to coordinate the rotation of the base with a timing of the images captured by the image capturing device to enable stitching of the images into a coherent panorama. As a result, a panorama can be photographed in less than one second.

Digital Camera Imaging System Simulation

Abstract: A digital camera is a complex system including a lens, a sensor (physics and circuits), and a digital image processor, where each component is a sophisticated system on its own. Since prototyping a digital camera is very expensive, it is highly desirable to have the capability to explore the system design tradeoffs and preview the system output ahead of time. An empirical digital imaging system simulation that aims to achieve such a goal is presented. It traces the photons reflected by the objects in a scene through the optics and color filter array, converts photons into electrons with consideration of noise introduced by the system, quantizes the accumulated voltage to digital counts by an analog-to-digital converter, and generates a Bayer raw image just as a real camera does. The simulated images are validated against real system outputs and show a close resemblance to the images captured under similar condition at all illumination levels.

Evaluation of the geometric stability and the accuracy potential of digital cameras - Comparing mechanical stabilisation versus parameterisation

Abstract: Recent tests on the geometric stability of several digital cameras that were not designed for photogrammetric applications have shown that the accomplished accuracies in object space are either limited or that the accuracy potential is not exploited to the fullest extent. A total of 72 calibrations were calculated with four different software products for eleven digital camera models with different hardware setups, some with mechanical fixation of one or more parts. The calibration procedure was chosen in accord to a German guideline for evaluation of optical 3D measuring systems [VDI/VDE, VDI/VDE 2634 Part 1, 2002. Optical 3D Measuring Systems–Imaging Systems with Point-by-point Probing. Beuth Verlag, Berlin]. All images were taken with ringflashes which was considered a standard method for close-range photogrammetry. In cases where the flash was mounted to the lens, the force exerted on the lens tube and the camera mount greatly reduced the accomplished accuracy. Mounting the ringflash to the camera instead resulted in a large improvement of accuracy in object space. For standard calibration best accuracies in object space were accomplished with a Canon EOS 5D and a 35 mm Canon lens where the focusing tube was fixed with epoxy (47 μm maximum absolute length measurement error in object space). The fixation of the Canon lens was fairly easy and inexpensive resulting in a sevenfold increase in accuracy compared with the same lens type without modification. A similar accuracy was accomplished with a Nikon D3 when mounting the ringflash to the camera instead of the lens (52 μm maximum absolute length measurement error in object space). Parameterisation of geometric instabilities by introduction of an image variant interior orientation in the calibration process improved results for most cameras. In this case, a modified Alpa 12 WA yielded the best results (29 μm maximum absolute length measurement error in object space). Extending the parameter model with FiBun software to model not only an image variant interior orientation, but also deformations in the sensor domain of the cameras, showed significant improvements only for a small group of cameras. The Nikon D3 camera yielded the best overall accuracy (25 μm maximum absolute length measurement error in object space) with this calibration procedure indicating at the same time the presence of image invariant error in the sensor domain. Overall, calibration results showed that digital cameras can be applied for an accurate photogrammetric survey and that only a little effort was sufficient to greatly improve the accuracy potential of digital cameras.

A camera as a sensor for lighting and shading control

Abstract: We developed a proof-of-concept prototype camera-based system for lighting and shading control. The system utilised a simple CMOS-based digital camera with an approximate v-lambda filter, calibrate...