Topic
Dose profile
About: Dose profile is a research topic. Over the lifetime, 2613 publications have been published within this topic receiving 45294 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: A measurement protocol is presented that improves the precision of dose measurements using a flat-bed document scanner in conjunction with two new GafChromic® film models, HS and Prototype A EBT exposed to 6MV photon beams.
Abstract: In this study, a measurement protocol is presented that improves the precision of dose measurements using a flat-bed document scanner in conjunction with two new GafChromic® film models, HS and Prototype A EBT exposed to 6MV photon beams. We established two sources of uncertainties in dose measurements, governed by measurement and calibration curve fit parameters contributions. We have quantitatively assessed the influence of different steps in the protocol on the overall dose measurement uncertainty. Applying the protocol described in this paper on the Agfa Arcus II flat-bed document scanner, the overall one-sigma dose measurement uncertainty for an uniform field amounts to 2% or less for doses above around 0.4Gy in the case of the EBT (Prototype A), and for doses above 5Gy in the case of the HS model GafChromic® film using a region of interest 2×2mm2 in size.
519 citations
TL;DR: A total treatment system of gated irradiation for heavy-ion radiotherapy found that with this system the target margin along the body axis could be decreased to 5-10 mm although the target moved twice or three times.
Abstract: Purpose: In order to reduce the treatment margin of the moving target due to breathing, we developed a gated irradiation system for heavy-ion radiotherapy. Methods and Materials: The motion of a patient due to respiration is detected by the motion of the body surface around the chest wall. A respiratory sensor was developed using an infrared light spot and a position-sensitive detector. A timing signal to request a beam is generated in response to the respiration waveform, and a carbon beam is extracted from the synchrotron using a RF-knockout method. CT images for treatment planning are taken in synchronization with the respiratory motion. For patient positioning, digitized fluoroscopic images superimposed with the respiration waveform were used. The relation between the respiratory sensor signal and the organ motion was examined using digitized video images from fluoroscopy. The performance of our gated system was demonstrated by using the moving phantom, and dose profiles were measured in the direction of phantom motion. Results: The timing of gate-on is set at the end of the expiratory phase, because the motion of the diaphragm is slower and more reproducible than during the inspiratory phase. The signal of the respiratory sensor shows a phase difference of 120 milliseconds between lower and upper locations on the chest wall. The motion of diaphragm is delayed by 200 milliseconds from the respiration waveform at the lower location. The beam extraction system worked according to the beam on/off logic for gating, and the gated CT scanner performed well. The lateral penumbra size of the dose profile along the moving axis was distinguishably decreased by the gated irradiation. The ratio of the nongated to gated lateral fall-off was 4.3, 3.5, and 2.0 under the stroke of 40.0, 29.0, and 13.0 mm respectively. Conclusion: We developed a total treatment system of gated irradiation for heavy-ion radiotherapy. We found that with this system the target margin along the body axis could be decreased to 5–10 mm although the target moved twice or three times. Over 150 patients with lung or liver cancer had already been treated by this gated irradiation system by the end of July 1999.
470 citations
TL;DR: This method for estimating the average dose from a CT procedure has been evaluated as a function of the number of scans in the multiple scan procedure and location in the dosimetry phantom using single scan dose profiles obtained from five different types of CT systems.
Abstract: A method for describing the absorbed dose delivered by x-ray transmission computed tomography (CT) is proposed which provides a means to characterize the doses resulting from CT procedures consisting of a series of adjacent scans. The dose descriptor chosen is the average dose at several locations in the imaged volume of the central scan of the series. It is shown that this average dose, as defined, for locations in the central scan of the series can be obtained from the integral of the dose profile perpendicular to the scan plane at these same locations for a single scan. This method for estimating the average dose from a CT procedure has been evaluated as a function of the number of scans in the multiple scan procedure and location in the dosimetry phantom using single scan dose profiles obtained from five different types of CT systems. For the higher dose regions in the phantoms, the multiple scan dose descriptor derived from the single scan dose profiles overestimates the multiple scan average dose by no more than 10%, provided the procedure consists of at least eight scans.
391 citations
TL;DR: In this paper, the physical and biological basis of the action of ion beams in cells and tissues is briefly reviewed and the variation of radiobiological effectiveness as function of the radiation quality is presented.
385 citations
TL;DR: The pencil beam dose model used for treatment planning at the PSI proton gantry, the only system presently applying proton therapy with a beam scanning technique, is presented, including the nuclear beam halo, which can predict quite precisely the dose directly from treatment planning without renormalization measurements.
Abstract: In this paper we present the pencil beam dose model used for treatment planning at the PSI proton gantry, the only system presently applying proton therapy with a beam scanning technique. The scope of the paper is to give a general overview on the various components of the dose model, on the related measurements and on the practical parametrization of the results. The physical model estimates from first physical principles absolute dose normalized to the number of incident protons. The proton beam flux is measured in practice by plane-parallel ionization chambers (ICs) normalized to protons via Faraday-cup measurements. It is therefore possible to predict and deliver absolute dose directly from this model without other means. The dose predicted in this way agrees very well with the results obtained with ICs calibrated in a cobalt beam. Emphasis is given in this paper to the characterization of nuclear interaction effects, which play a significant role in the model and are the major source of uncertainty in the direct estimation of the absolute dose. Nuclear interactions attenuate the primary proton flux, they modify the shape of the depth-dose curve and produce a faint beam halo of secondary dose around the primary proton pencil beam in water. A very simple beam halo model has been developed and used at PSI to eliminate the systematic dependences of the dose observed as a function of the size of the target volume. We show typical results for the relative (using a CCD system) and absolute (using calibrated ICs) dosimetry, routinely applied for the verification of patient plans. With the dose model including the nuclear beam halo we can predict quite precisely the dose directly from treatment planning without renormalization measurements, independently of the dose, shape and size of the dose fields. This applies also to the complex non-homogeneous dose distributions required for the delivery of range-intensity-modulated proton therapy, a novel therapy technique developed at PSI.
322 citations