scispace - formally typeset
Search or ask a question
Topic

Dynamic Vibration Absorber

About: Dynamic Vibration Absorber is a research topic. Over the lifetime, 4764 publications have been published within this topic receiving 49429 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the adaptive tuned vibration absorber (ATVA) with a smart variable stiffness element is capable of retuning itself in response to a time-varying excitation frequency, enabling effective vibration control over a range of frequencies.
Abstract: An adaptive tuned vibration absorber (ATVA) with a smart variable stiffness element is capable of retuning itself in response to a time-varying excitation frequency, enabling effective vibration control over a range of frequencies. This paper discusses novel methods of achieving variable stiffness in an ATVA by changing shape, as inspired by biological paradigms. It is shown that considerable variation in the tuned frequency can be achieved by actuating a shape change, provided that this is within the limits of the actuator. A feasible design for such an ATVA is one in which the device offers low resistance to the required shape change actuation while not being restricted to low values of the effective stiffness of the vibration absorber. Three such original designs are identified: (i) A pinned–pinned arch beam with fixed profile of slight curvature and variable preload through an adjustable natural curvature; (ii) a vibration absorber with a stiffness element formed from parallel curved beams of adjustable curvature vibrating longitudinally; (iii) a vibration absorber with a variable geometry linkage as stiffness element. The experimental results from demonstrators based on two of these designs show good correlation with the theory.

35 citations

Journal ArticleDOI
TL;DR: In this paper, a tunable vibration absorber set (TVAs) is designed to suppress regenerative chatter in milling process (as a semi-active controller), and an extended dynamic model of the peripheral milling with closed form expressions for the nonlinear cutting forces is presented.

35 citations

Journal ArticleDOI
TL;DR: In this article, the authors proposed a novel inerter-based dynamic vibration absorber, namely, electromagnetic resonant shunt tuned mass-damper-inerter (ERS-TMDI).
Abstract: This paper proposes a novel inerter-based dynamic vibration absorber, namely, electromagnetic resonant shunt tuned mass-damper-inerter (ERS-TMDI). To obtain the performances of the ERS-TMDI, the combined ERS-TMDI and a single degree of freedom system are introduced. criteria performances of the ERS-TMDI are introduced in comparison with the classical tuned mass-damper (TMD), the electromagnetic resonant shunt series TMDs (ERS-TMDs), and series-type double-mass TMDs with the aim to minimize structure damage and simultaneously harvest energy under random wind excitation. The closed form solutions, including the mechanical tuning ratio, the electrical damping ratio, the electrical tuning ratio, and the electromagnetic mechanical coupling coefficient, are obtained. It is shown that the ERS-TMDI is superior to the classical TMD, ERS-TMDs, and series-type double-mass TMDs systems for protection from structure damage. Meanwhile, in the time domain, a case study of Taipei 101 tower is presented to demonstrate the dual functions of vibration suppression and energy harvesting based on the simulation fluctuating wind series, which is generated by the inverse fast Fourier transform method. The effectiveness and robustness of ERS-TMDI in the frequency and time domain are illustrated.

35 citations

Journal ArticleDOI
TL;DR: In this article, a quasi-zero stiffness (QZS) spring is used to adjust the stiffness and symmetry of a rigid mass suspended on a multi-modal beam.

35 citations

Journal ArticleDOI
TL;DR: In this article, self-sensing technology was introduced into an adaptive tuned vibration absorber, incorporating a laminated magnetorheological elastomer (MRE) structure, a hybrid magnetic system and a selfsensing component.
Abstract: In this paper, self-sensing technology was introduced into an adaptive tuned vibration absorber, incorporating a laminated magnetorheological elastomer (MRE) structure, a hybrid magnetic system and a self-sensing component. The adoption of the laminated MRE structure and the hybrid magnetic system enables the absorber to have higher lateral flexibility and a wider effective frequency range. The integration of the self-sensing capability allows the absorber to operate without sensors and, at the same time, greatly reduces costs, required space and maintenance. A series of experiments were conducted to measure the frequency shift property, to verify the self-sensing capability and to evaluate its effectiveness on vibration reduction. The experimental results show that the natural frequency of the proposed absorber can be changed to 4.8 Hz at –3 A and 11.3 Hz at 3 A from 8.5 Hz at 0 A, the frequency of the self-sensed voltage equals the excitation frequency and, more importantly, the vibration control effectiveness of the self-sensing MRE absorber is experimentally verified and it is more effective on vibration reduction than a passive absorber.

35 citations


Network Information
Related Topics (5)
Vibration
80K papers, 849.3K citations
84% related
Finite element method
178.6K papers, 3M citations
76% related
Piston
176.1K papers, 825.4K citations
75% related
Rotor (electric)
179.9K papers, 1.2M citations
74% related
Control theory
299.6K papers, 3.1M citations
73% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
202347
2022120
2021134
2020162
2019215
2018206