Topic
Electric power system
About: Electric power system is a research topic. Over the lifetime, 133024 publications have been published within this topic receiving 1781469 citations. The topic is also known as: power system & EPS.
Papers published on a yearly basis
Papers
More filters
Book•
01 Oct 1995
TL;DR: In this paper, the authors present a power quality evaluation procedure for the purpose of measuring the power quality of a power supply. But, they do not define the specific classes of power quality problems.
Abstract: CHAPTER 1: INTRODUCTION What is Power Quality? Power Quality -- Voltage Quality Why Are We Concerned About Power Quality? The Power Quality Evaluation Procedure Who Should Use This Book Overview of the Contents CHAPTER 2: TERMS AND DEFINITIONS Need for a Consistent Vocabulary General Classes of Power Quality Problems Transients Long-Duration Voltage Variations Short-Duration Voltage Variations Voltage Imbalance Waveform Distortion Voltage Fluctuation Power Frequency Variations Power Quality Terms Ambiguous Terms CBEMA and ITI Curves References CHAPTER 3: VOLTAGE SAGS AND INTERRUPTIONS Sources of Sags and Interruptions Estimating Voltage Sag Performance Fundamental Principles of Protection Solutions at the End-User Level Evaluating the Economics of Different Ride-Through Alternatives Motor-Starting Sags Utility System Fault-Clearing Issues References CHAPTER 4: TRANSIENT OVERVOLTAGES Sources of Transient Overvoltages Principles of Overvoltage Protection Devices for Overvoltage Protection Utility Capacitor-Switching Transients Utility System Lightning Protection Managing Ferroresonance Switching Transient Problems with Loads Computer Tools for Transients Analysis References CHAPTER 5: FUNDAMENTALS OF HARMONICS Harmonic Distortion Voltage versus Current Distortion Harmonics versus Transients Harmonic Indexes Harmonic Sources from Commercial Loads Harmonic Sources from Industrial Loads Locating Harmonic Sources System Response Characteristics Effects of Harmonic Distortion Interharmonics References Bibliography CHAPTER 6: APPLIED HARMONICS Harmonic Distortion Evaluations Principles for Controlling Harmonics Where to Control Harmonics Harmonic Studies Devices for Controlling Harmonic Distortion Harmonic Filter Design: A Case Study Case Studies Standards of Harmonics References Bibliography CHAPTER 7: LONG-DURATION VOLTAGE VARIATIONS Principles of Regulating the Voltage Devices for Voltage Regulation Utility Voltage Regulator Application Capacitors for Voltage Regulation End-User Capacitor Application Regulating Utility Voltage with Distributed Resources Flicker References Bibliography CHAPTER 8: POWER QUALITY BENCHMARKING Introduction Benchmarking Process RMS Voltage Variation Indices Harmonics Indices Power Quality Contracts Power Quality Insurance Power Quality State Estimation Including Power Quality in Distribution Planning References Bibliography CHAPTER 9: DISTRIBUTED GENERATION AND POWER QUALITY Resurgence of DG DG Technologies Interface to the Utility System Power Quality Issues Operating Conflicts DG on Distribution Networks Siting DGDistributed Generation Interconnection Standards Summary References Bibliography CHAPTER 10: WIRING AND GROUNDING Resources Definitions Reasons for Grounding Typical Wiring and Grounding Problems Solutions to Wiring and Grounding Problems Bibliography CHAPTER 11: POWER QUALITY MONITORING Monitoring Considerations Historical Perspective of Power Quality Measuring Instruments Power Quality Measurement Equipment Assessment of Power Quality Measurement Data Application of Intelligent Systems Power Quality Monitoring Standards References Index INDEX
1,991 citations
TL;DR: In this article, the authors present the present status of active filters based on state-of-the-art power electronics technology, and their future prospects and directions toward the 21st Century, including the personal views and expectations of the author.
Abstract: Attention has been paid to active filters for power conditioning which provide the following multifunctions: reactive power compensation; harmonic compensation; flicker/imbalance compensation; and voltage regulation. Active filters in a range of 50 kVA-60 MVA have been practically installed in Japan. In the near future, the term "active filters" will have a much wider meaning than it did in the 1970s. For instance, active filters intended for harmonic solutions are expanding their functions from harmonic compensation of nonlinear loads into harmonic isolation between utilities and consumers, and harmonic damping throughout power distribution systems. This paper presents the present status of active filters based on state-of-the-art power electronics technology, and their future prospects and directions toward the 21st Century, including the personal views and expectations of the author.
1,700 citations
20 Jun 2004
TL;DR: In this article, the authors propose a system approach which views generation and associated loads as a subsystem or a "microgrid". During disturbances, the generation and corresponding loads can separate from the distribution system to isolate the microgrid's load from the disturbance (providing UPS services) without harming the transmission grid's integrity.
Abstract: Application of individual distributed generators can cause as many problems as it may solve. A better way to realize the emerging potential of distributed generation is to take a system approach which views generation and associated loads as a subsystem or a "microgrid". During disturbances, the generation and corresponding loads can separate from the distribution system to isolate the microgrid's load from the disturbance (providing UPS services) without harming the transmission grid's integrity. This ability to island generation and loads together has a potential to provide a higher local reliability than that provided by the power system as a whole. In this model it is also critical to be able to use the waste heat by placing the sources near the heat load. This implies that a unit can be placed at any point on the electrical system as required by the location of the heat load.
1,685 citations
TL;DR: In this paper, the authors present a method of finding a continuum of power flow solutions starting at some base load and leading to the steady-state voltage stability limit (critical point) of the system.
Abstract: The authors present a method of finding a continuum of power flow solutions starting at some base load and leading to the steady-state voltage stability limit (critical point) of the system. A salient feature of the so-called continuation power flow is that it remains well-conditioned at and around the critical point. As a consequence, divergence due to ill-conditioning is not encountered at the critical point, even when single-precision computation is used. Intermediate results of the process are used to develop a voltage stability index and identify areas of the system most prone to voltage collapse. Examples are given where the voltage stability of a system is analyzed using several different scenarios of load increase. >
1,666 citations
[...]
TL;DR: In this article, the authors argue that the transition to a smart grid has to be evolutionary to keep the lights on; on the other hand, the issues surrounding the smart grid are signifi cant enough to demand major changes in power systems operating philosophy.
Abstract: Many believe the electric power system is undergoing a profound change driven by a number of needs. There's the need for environmental compliance and energy conservation. We need better grid reliability while dealing with an aging infrastructure. And we need improved operational effi ciencies and customer service. The changes that are happening are particularly signifi cant for the electricity distribution grid, where "blind" and manual operations, along with the electromechanical components, will need to be transformed into a "smart grid." This transformation will be necessary to meet environmental targets, to accommodate a greater emphasis on demand response (DR), and to support plug-in hybrid electric vehicles (PHEVs) as well as distributed generation and storage capabilities. It is safe to say that these needs and changes present the power industry with the biggest challenge it has ever faced. On one hand, the transition to a smart grid has to be evolutionary to keep the lights on; on the other hand, the issues surrounding the smart grid are signifi cant enough to demand major changes in power systems operating philosophy.
1,661 citations