Topic
Electric resistance welding
About: Electric resistance welding is a research topic. Over the lifetime, 16761 publications have been published within this topic receiving 154851 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: An alternating current pulsed metal inert gas (MIG) welding power source has been developed for welding thin sheets of aluminium alloys and the process features are investigated in this paper, which successfully counteract the problem of burnthrough in welding of thin sheet joints and greatly improve the bridging ability for wide gap joints.
Abstract: An alternating current (ac) pulsed metal inert gas (MIG) welding power source has been developed for welding thin sheets of aluminium alloys and the process features are investigated. Advantages such as high wire melting coefficient, low heat input, shallow penetration, and increased reinforcement height are obtained at high values of electrode negative ratio (ratio of electrode negative current integration to electrode negative plus electrode positive current integration over one pulse cycle). These features successfully counteract the problem of burnthrough in welding of thin sheet joints and greatly improve the bridging ability for wide gap joints. Thin sheet joints can be welded at high speed and with low distortion. By integrating the present welding power source with a welding robot, welding process and current waveform parameters can be defined by key operations in the teach pendant. It is possible to switch between welding processes such as ac pulsed MIG, direct current (dc) pulsed MIG, lo...
67 citations
TL;DR: In this paper, the authors quantitatively modeled and analyzed the dynamic electrical resistance during resistance spot welding, which is obtained by taking the sum of temperature-dependent bulk resistance of the workpieces and contact resistances at the faying surface and electrode-workpiece interface within an effective area corresponding to the electrode tip.
Abstract: Dynamic electrical resistance during resistance spot welding has been quantitatively modeled and analyzed in this work. A determination of dynamic resistance is necessary for predicting the transport processes and monitoring the weld quality during resistance spot welding. In this study, dynamic resistance is obtained by taking the sum of temperature-dependent bulk resistance of the workpieces and contact resistances at the faying surface and electrode-workpiece interface within an effective area corresponding to the electrode tip where welding current primarily flows. A contact resistance is composed of constriction and film resistances, which are functions of hardness, temperature, electrode force, and surface conditions. The temperature is determined from the previous study in predicting unsteady, axisymmetric mass, momentum, heat, species transport, and magnetic field intensity with a mushy-zone phase change in workpieces, and temperature and magnetic fields in the electrodes of different geometries. The predicted nugget thickness and dynamic resistance versus time show quite good agreement with available experimental data. Excluding expulsion, the dynamic resistance curve can be divided into four stages. A rapid decrease of dynamic resistance in stage I is attributed to decreases in contact resistances at the faying surface and electrode-workpiece interface. In stage 2, the increase in dynamic resistance results from the primary increase of bulk resistance in the workpieces and an increase of the sum of contact resistances at the faying surface and electrode-workpiece interface. Dynamic resistance in stage 3 decreases, because increasing rate of bulk resistance in the workpieces and contact resistances decrease. In stage 4 the decrease of dynamic resistance is mainly due to the formation of the molten nugget at the faying surface. The molten nugget is found to occur in stage 4 rather than stage 2 or 3 as qualitatively proposed in the literature. The effects of different parameters on the dynamic resistance curve are also presented.
67 citations
Patent•
29 Jan 1986
TL;DR: In this article, a method and apparatus for electrically heat welding a thermoplastic fitting having an electric resistance heating element disposed therein whereby a regulated quantity of electric power is supplied to the heating element during the welding process and the making of a high quality weld is insured.
Abstract: A method and apparatus for electrically heat welding a thermoplastic fitting having an electric resistance heating element disposed therein whereby a regulated quantity of electric power is supplied to the heating element during the welding process and the making of a high quality weld is insured. In accordance with the method, a controlled electric power is supplied to the resistance heating element of the fitting. The initial magnitude of the current flowing through the heating element is sensed and compared with predetermined current levels for various sizes of fittings whereby the size of the fitting as well as the total time the controlled electric power should be supplied to the heating element of the fitting for the making of a high quality weld are determined. The magnitude of the current flowing through the heating element over the time the controlled electric power is supplied thereto is sensed at predetermined time intervals and compared with predetermined current levels for the size of fitting being welded to thereby determine if the welding process is proceeding abnormally at such time intervals. The electric power supplied to the heating element is terminated when it is determined that the welding process is proceeding abnormally or otherwise at the end of the total time determined to be required for the making of a high quality weld.
67 citations
TL;DR: In this paper, the resistance spot welding of steel and aluminium sheets using aluminium clad steel sheets as insert metals was reported and the strength of these joints was of the same order as that of the aluminium joints.
Abstract: The present paper reports the resistance spot welding of steel and aluminium sheets using aluminium clad steel sheets as insert metals. Intermetallic compound layers were formed in the weld zones in direct spot welding of steel sheets to aluminium sheets. Thus, the strength of these joints was lower than that of aluminium to aluminium joints. Intermetallic compound layers were also formed at the steel/aluminium interfaces of the insert metal in welding of steel to aluminium using an insert metal sheet. However, the strength of these joints was of the same order as that of the aluminium joints. The fracture mode of these joints varied with the welding current. The suitable welding current for steel to aluminium joints varied between the values suitable for steel to steel and aluminium to aluminium joints. The fatigue strength of joints using insert metals was somewhat lower than that of the aluminium joints.
67 citations
TL;DR: In this paper, the main investigation directions performed at the Department of Materials Technology and Welding are presented: Weldability of HSLA steel and factors influencing susceptibility to cold cracking of welded joints.
Abstract: Underwater Welding - A Review The paper describes principles of underwater welding and recent trends in research works undertaken for enhance welding technology and properties of underwater welds. Department of Materials Technology and Welding at Gdansk University of Technology (GUT) has been involved in underwater welding research for over 25 years. Investigations include technology of underwater welding, and weld properties examinations. All tests have been performed with the use of self designed stands allow to perform welds in shallow depths as well as the depths up to 1000 m. The main investigation directions performed at the Department of Materials Technology and Welding are presented: Weldability of HSLA steel and factors influencing susceptibility to cold cracking of welded joints. The effects of wet welding conditions on diffusible hydrogen amount in the welds. The effects of heat input, underwater welding depths and composition of shielded gases on welds toughness.
67 citations