Showing papers on "Electrode array published in 2017"

In Vitro Multi-Functional Microelectrode Array Featuring 59 760 Electrodes, 2048 Electrophysiology Channels, Stimulation, Impedance Measurement, and Neurotransmitter Detection Channels

Abstract: Biological cells are characterized by highly complex phenomena and processes that are, to a great extent, interdependent. To gain detailed insights, devices designed to study cellular phenomena need to enable tracking and manipulation of multiple cell parameters in parallel; they have to provide high signal quality and high-spatiotemporal resolution. To this end, we have developed a CMOS-based microelectrode array system for in vitro applications that integrates six measurement and stimulation functions, the largest number to date. Moreover, the system features the largest active electrode array area to date ( $4.48 \times 2.43$ mm2) to accommodate 59 760 electrodes, while its power consumption, noise characteristics, and spatial resolution (13.5- $\mu$ m electrode pitch) are comparable to the best state-of-the-art devices. The system includes: 2048 action potential (AP, bandwidth: 300 Hz–10 kHz) recording units, 32 local-field-potential (LFP, bandwidth: 1 Hz–300 Hz) recording units, 32 current recording units, 32 impedance measurement units, and 28 neurotransmitter detection units, in addition to the 16 dual-mode voltage-only or current/voltage-controlled stimulation units. The electrode array architecture is based on a switch matrix, which allows for connecting any measurement/stimulation unit to any electrode in the array and for performing different measurement/stimulation functions in parallel.

Touch display panel and touch display device

Abstract: The present application discloses a touch display panel and a touch display device An embodiment of the touch display panel includes: a first touch electrode array, comprising M first touch electrodes including 1st to Mth first touch electrodes, arranged along a first direction; and a second touch electrode array, comprising N second touch electrodes; each of the first touch electrodes comprising a first connection portion extending along the second direction, and each of the 2nd to Mth first touch electrodes further comprising a plurality of first electrode blocks; and an orthographic projection of each of the first electrode blocks on the second touch electrode array at least partially overlapping at least two second touch electrodes The embodiment has improved touch detection accuracy

High-Throughput Selective Capture of Single Circulating Tumor Cells by Dielectrophoresis at a Wireless Electrode Array

Abstract: We demonstrate continuous high-throughput selective capture of circulating tumor cells by dielectrophoresis at arrays of wireless electrodes (bipolar electrodes, BPEs). The use of BPEs removes the requirement of ohmic contact to individual array elements, thus enabling otherwise unattainable device formats. Capacitive charging of the electrical double layer at opposing ends of each BPE allows an AC electric field to be transmitted across the entire device. Here, two such designs are described and evaluated. In the first design, BPEs interconnect parallel microchannels. Pockets extruding from either side of the microchannels volumetrically control the number of cells captured at each BPE tip and enhance trapping. High-fidelity single-cell capture was achieved when the pocket dimensions were matched to those of the cells. A second, open design allows many non-targeted cells to pass through. These devices enable high-throughput capture of rare cells and single-cell analysis.

Thermal Release Transfer Printing for Stretchable Conformal Bioelectronics.

Abstract: Soft neural electrode arrays that are mechanically matched between neural tissues and electrodes offer valuable opportunities for the development of disease diagnose and brain computer interface systems. Here, a thermal release transfer printing method for fabrication of stretchable bioelectronics, such as soft neural electrode arrays, is presented. Due to the large, switchable and irreversible change in adhesion strength of thermal release tape, a low-cost, easy-to-operate, and temperature-controlled transfer printing process can be achieved. The mechanism of this method is analyzed by experiments and fracture-mechanics models. Using the thermal release transfer printing method, a stretchable neural electrode array is fabricated by a sacrificial-layer-free process. The ability of the as-fabricated electrode array to conform different curvilinear surfaces is confirmed by experimental and theoretical studies. High-quality electrocorticography signals of anesthetized rat are collected with the as-fabricated electrode array, which proves good conformal interface between the electrodes and dura mater. The application of the as-fabricated electrode array on detecting the steady-state visual evoked potentials research is also demonstrated by in vivo experiments and the results are compared with those detected by stainless-steel screw electrodes.

A microneedle electrode array on flexible substrate for long-term EEG monitoring

Abstract: Conventional wet electrodes require skin preparation and gel usage to maintain low interface impedance, which limit their applications in long-term monitoring of biopotentials such as electroencephalogram (EEG). To address this problem, microneedle electrode arrays (MNEAs) have been employed as dry electrodes, which could be capable of EEG monitoring without skin abrasion and gel electrolyte. However, most of them are usually based on rigid substrates that are not conformal to curved and moved human skin. Therefore, we develop a flexible parylene-based MNEA (P-MNEA) with silicon microneedles, which could provide not only conformal but also robust contact. Firstly, the microfabrication process is concretely illustrated and makes it repeatable. Then, penetration tests illustrate these microneedles are robust enough to penetrate into epidermis so that impedances of stratum corneum make limited contribution to interface impedance. Consequently, in vivo impedance results verify the priority of P-MNEA in long-time impedance stability. Meanwhile, competitive impedance density of 7.5 KΩ cm2@10 Hz is attained. Eventually, EEG recoding results as well as correlation and coherence analyses of P-MNEA indicate comparable performance to that of wet electrode. In brief, these results reveal promising prospect of P-MNEA in long-time EEG monitoring.

Clinical investigation of the Nucleus Slim Modiolar Electrode.

Abstract: Aims The Nucleus CI532 cochlear implant incorporates a new precurved electrode array, i.e., the Slim Modiolar electrode (SME), which is designed to bring electrode contacts close to the medial wall of the cochlea while avoiding trauma due to scalar dislocation or contact with the lateral wall during insertion. The primary aim of this prospective study was to determine the final position of the electrode array in clinical cases as evaluated using flat-panel volume computed tomography. Methods Forty-five adult candidates for unilateral cochlear implantation were recruited from 8 centers. Eleven surgeons attended a temporal bone workshop and received further training with a transparent plastic cochlear model just prior to the first surgery. Feedback on the surgical approach and use of the SME was collected via a questionnaire for each case. Computed tomography of the temporal bone was performed postoperatively using flat-panel digital volume tomography or cone beam systems. The primary measure was the final scalar position of the SME (completely in scala tympani or not). Secondly, medial-lateral position and insertion depth were evaluated. Results Forty-four subjects received a CI532. The SME was located completely in scala tympani for all subjects. Pure round window (44% of the cases), extended round window (22%), and inferior and/or anterior cochleostomy (34%) approaches were successful across surgeons and cases. The SME was generally positioned close to the modiolus. Overinsertion of the array past the first marker tended to push the basal contacts towards the lateral wall and served only to increase the insertion depth of the first electrode contact without increasing the insertion depth of the most apical electrode. Complications were limited to tip fold-overs encountered in 2 subjects; both were attributed to surgical error, with both reimplanted successfully. Conclusions The new Nucleus CI532 cochlear implant with SME achieved the design goal of producing little or no trauma as indicated by consistent scala tympani placement. Surgeons should be carefully trained to use the new deployment method such that tip fold-overs and over insertion may be avoided.

iElectrodes: A Comprehensive Open-Source Toolbox for Depth and Subdural Grid Electrode Localization

Abstract: The localization of intracranial electrodes is a fundamental step in the analysis of invasive electroencephalography (EEG) recordings in research and clinical practice. The conclusions reached from the analysis of these recordings rely on the accuracy of electrode localization in relationship to brain anatomy. However, currently available techniques for localizing electrodes from magnetic resonance (MR) and/or computerized tomography (CT) images are time consuming and/or limited to particular electrode types or shapes. Here we present iElectrodes, an open-source toolbox that provides robust and accurate semi-automatic localization of both subdural grids and depth electrodes. Using pre- and post-implantation images, the method takes 2 to 3 minutes to localize the coordinates in each electrode array and automatically number the electrodes. The proposed pre-processing pipeline allows one to work in a normalized space and to automatically obtain anatomical labels of the localized electrodes without neuroimaging experts. We validated the method with data from 22 patients implanted with a total of 1242 electrodes. We show that localization distances were within 0.56 mm of those achieved by experienced manual evaluators. iElectrodes provided additional advantages in terms of robustness (even with severe perioperative cerebral distortions), speed (less than half the operator time compared to expert manual localization), simplicity, utility across multiple electrode types (surface and depth electrodes) and all brain regions.

Automatic Cochlear Duct Length Estimation for Selection of Cochlear Implant Electrode Arrays.

Abstract: Hypothesis:Cochlear duct length (CDL) can be automatically measured for custom selection of cochlear implant (CI) electrode arrays.Background:CI electrode array selection can be influenced by measuring the CDL, which is estimated based on the length of the line that connects the round window and the

A Fully Integrated Wireless SoC for Motor Function Recovery After Spinal Cord Injury

Abstract: This paper presents a wirelessly powered, fully integrated system-on-a-chip (SoC) supporting 160-channel stimulation, 16-channel recording, and 48-channel bio-impedance characterization to enable partial motor function recovery through epidural spinal cord electrical stimulation. A wireless transceiver is designed to support quasi full-duplex data telemetry at a data rate of 2 Mb/s. Furthermore, a unique in situ bio-impedance characterization scheme based on time-domain analysis is implemented to derive the Randles cell electrode model of the electrode-electrolyte interface. The SoC supports concurrent stimulation and recording while the high-density stimulator array meets an output compliance voltage of up to ±10 V with versatile stimulus programmability. The SoC consumes 18 mW and occupies a chip area of 5.7 mm × 4.4 mm using 0.18 μm high-voltage CMOS process. In our in vivo rodent experiment, the SoC is used to perform wireless recording of EMG responses while stimulation is applied to enable the standing and stepping of a paralyzed rat. To facilitate the system integration, a novel thin film polymer packaging technique is developed to provide a heterogeneous integration of the SoC, coils, discrete components, and high-density flexible electrode array, resulting in a miniaturized prototype implant with a weight and form factor of 0.7 g and 0.5 cm3, respectively.

Three-Dimensional Force Profile During Cochlear Implantation Depends on Individual Geometry and Insertion Trauma.

Abstract: Objectives To preserve the acoustic hearing, cochlear implantation has to be as atraumatic as possible. Therefore, understanding the impact of the cochlear geometry on insertion forces and intracochlear trauma might help to adapt and improve the electrode insertion and reduce the probability of intracochlear trauma. Design The study was conducted on 10 fresh-frozen human temporal bones. The inner ear was removed from the temporal bone. The bony capsule covering the scala vestibuli was removed and the dissected inner ear was mounted on the three-dimensional (3D) force measurement system (Agilent technologies, Nano UTM, Santa Clare, CA). A lateral wall electrode array was inserted, and the forces were recorded in three dimensions with a sensitivity of 2 μN. Afterwards, the bones were scanned using a Skyscan 1173 micro-computed tomography (micro-CT). The obtained 3D force profiles were correlated with the videos of the insertions recorded through the microscope, and the micro-CT images. Results A correlation was found between intracochlear force profiles measured in three different directions with intracochlear trauma detected with micro-CT imaging. The angle of insertion and the cochlear geometry had a significant impact on the electrode array insertion forces and possible insertion trauma. Intracochlear trauma occurred frequently within the first 180° from the round window, where buckling of the proximal part of the electrode carrier inside the cochlea, and rupturing of the spiral ligament was observed. Conclusions The combination of the 3D force measurement system and micro-CT can be used to characterize the mechanical behavior of a CI electrode array and some forms of insertion trauma. Intracochlear trauma does not always correlate with higher force amplitudes, but rather with an abrupt change of force directions.

Mapping the fine structure of cortical activity with different micro-ECoG electrode array geometries

Abstract: OBJECTIVE Innovations in micro-electrocorticography (µECoG) electrode array manufacturing now allow for intricate designs with smaller contact diameters and/or pitch (i.e. inter-contact distance) down to the sub-mm range. The aims of the present study were: (i) to investigate whether frequency ranges up to 400 Hz can be reproducibly observed in µECoG recordings and (ii) to examine how differences in topographical substructure between these frequency bands and electrode array geometries can be quantified. We also investigated, for the first time, the influence of blood vessels on signal properties and assessed the influence of cortical vasculature on topographic mapping. APPROACH The present study employed two µECoG electrode arrays with different contact diameters and inter-contact distances, which were used to characterize neural activity from the somatosensory cortex of minipigs in a broad frequency range up to 400 Hz. The analysed neural data were recorded in acute experiments under anaesthesia during peripheral electrical stimulation. MAIN RESULTS We observed that µECoG recordings reliably revealed multi-focal cortical somatosensory response patterns, in which response peaks were often less than 1 cm apart and would thus not have been resolvable with conventional ECoG. The response patterns differed by stimulation site and intensity, they were distinct for different frequency bands, and the results of functional mapping proved independent of cortical vascular. Our analysis of different frequency bands exhibited differences in the number of activation peaks in topographical substructures. Notably, signal strength and signal-to-noise ratios differed between the two electrode arrays, possibly due to their different sensitivity for variations in spatial patterns and signal strengths. SIGNIFICANCE Our findings that the geometry of µECoG electrode arrays can strongly influence their recording performance can help to make informed decisions that maybe important in number of clinical contexts, including high-resolution brain mapping, advanced epilepsy diagnostics or brain-machine interfacing.

Sensitivity distribution simulations of surface electrode configurations for electrical impedance myography.

Abstract: Introduction Surface-based electrical impedance myography (EIM) is sensitive to muscle condition in neuromuscular disorders. However, the specific contribution of muscle to the obtained EIM values is unknown. Methods We combined theory and the finite element method to calculate the electrical current distribution in a 3-dimensional model using different electrode array designs and subcutaneous fat thicknesses (SFTs). Through a sensitivity analysis, we decoupled the contribution of muscle from other surrounding tissues in the measured surface impedance values. Results The contribution of muscle to surface EIM values varied greatly depending on the electrode array size and the SFT. For example, the contribution of muscle with 6-mm SFT was 8% for a small array compared with 32% for a large array. Conclusions The approach presented can be employed to inform the design of robust EIM electrode configurations that maximize the contribution of muscle across the disease and injury spectrum. Muscle Nerve 56: 887–895, 2017

A Stretchable Microneedle Electrode Array for Stimulating and Measuring Intramuscular Electromyographic Activity

Abstract: We have developed a stretchablemicroneedle electrode array (sMEA) to stimulate andmeasure the electrical activity of muscle across multiple sites. The technology provides the signal fidelity and spatial resolution of intramuscular electrodesacross a large area of tissue. Our sMEA is composed of a polydimethylsiloxane (PDMS) substrate, conductive-PDMS traces, and stainless-steel penetrating electrodes. The traces and microneedles maintain a resistance of less than 10 $\text {k}\Omega $ when stretched up to a ~63% tensile strain, which allows for the full range of physiological motion of felinemuscle. The device and its constituent materials are cytocompatible for at least 28 days in vivo . When implanted in vivo , the device measures electromyographic (EMG) activity with clear compound motor unit action potentials. The sMEA also maintains a stable connection with moving muscle while electrically stimulating the tissue. This technology has direct application to wearable sensors, neuroprostheses, and electrophysiological studies of animals and humans.

The Effect of Scala Tympani Morphology on Basilar Membrane Contact With a Straight Electrode Array: A Human Temporal Bone Study.

Abstract: HYPOTHESIS: Scala tympani morphology influences the insertion dynamics and intra-scalar position of straight electrode arrays. BACKGROUND: Hearing preservation is the goal of cochlear implantation with current thin straight electrode arrays. These hug the lateral wall, facilitating full, atraumatic insertions. However, most studies still report some postoperative hearing loss. This study explores the influence of scala tympani morphology on array position relative to the basilar membrane and its possible contribution to postoperative hearing loss. MATERIALS AND METHODS: Twenty-six fresh-frozen human temporal bones implanted with a straight electrode array were three-dimensionally reconstructed from micro-photographic histological sections. Insertion depth and the proximity between the array and basilar membrane were recorded. Lateral wall shape was quantified as a curvature ratio. RESULTS: Insertion depths ranged from 233 to 470 degrees. The mean first point of contact between the array and basilar membrane was 185 degrees; arrays tended to remain in contact with the membrane after first contacting it. Eighty-nine and 93% of arrays that reached the upper basal (>240-360 degrees) and second (>360-720 degrees) turns respectively contacted the basilar membrane in these regions. Scalar wall curvature ratio decreased significantly (the wall became steeper) from the basal to second turns. This shift correlated with a reduced distance between the array and basilar membrane. CONCLUSION: Scala tympani morphology influences the insertion dynamics and intra-scalar position of a straight electrode array. In addition to gross trauma of cochlear structures, contact between the array and basilar membrane and how this impacts membrane function should be considered in hearing preservation cases.

Analysis of Al2O3-parylene C bilayer coatings and impact of microelectrode topography on long term stability of implantable neural arrays.

Abstract: OBJECTIVE Performance of many dielectric coatings for neural electrodes degrades over time, contributing to loss of neural signals and evoked percepts. Studies using planar test substrates have found that a novel bilayer coating of atomic-layer deposited (ALD) Al2O3 and parylene C is a promising candidate for neural electrode applications, exhibiting superior stability to parylene C alone. However, initial results from bilayer encapsulation testing on non-planar devices have been less positive. Our aim was to evaluate ALD Al2O3-parylene C coatings using novel test paradigms, to rigorously evaluate dielectric coatings for neural electrode applications by incorporating neural electrode topography into test structure design. APPROACH Five test devices incorporated three distinct topographical features common to neural electrodes, derived from the utah electrode array (UEA). Devices with bilayer (52 nm Al2O3 + 6 µm parylene C) were evaluated against parylene C controls (N ⩾ 6 per device type). Devices were aged in phosphate buffered saline at 67 °C for up to 311 d, and monitored through: (1) leakage current to evaluate encapsulation lifetimes (>1 nA during 5VDC bias indicated failure), and (2) wideband (1-105 Hz) impedance. MAIN RESULTS Mean-times-to-failure (MTTFs) ranged from 12 to 506 d for bilayer-coated devices, versus 10 to >2310 d for controls. Statistical testing (log-rank test, α = 0.05) of failure rates gave mixed results but favored the control condition. After failure, impedance loss for bilayer devices continued for months and manifested across the entire spectrum, whereas the effect was self-limiting after several days, and restricted to frequencies <100 Hz for controls. These results correlated well with observations of UEAs encapsulated with bilayer and control films. SIGNIFICANCE We observed encapsulation failure modes and behaviors comparable to neural electrode performance which were undetected in studies with planar test devices. We found the impact of parylene C defects to be exacerbated by ALD Al2O3, and conclude that inferior bilayer performance arises from degradation of ALD Al2O3 when directly exposed to saline. This is an important consideration, given that neural electrodes with bilayer coatings are expected to have ALD Al2O3 exposed at dielectric boundaries that delineate electrode sites. Process improvements and use of different inorganic coatings to decrease dissolution in physiological fluids may improve performance. Testing frameworks which take neural electrode complexities into account will be well suited to reliably evaluate such encapsulation schemes.

Long term performance of porous platinum coated neural electrodes.

Abstract: Over the last several years, there has been a growing interest in neural implants for the study and diagnostics of neurological disorders as well as for the symptomatic treatment of central nervous system related diseases. One of the major challenges is the trade-off between small electrode sizes for high selectivity between single neurons and large electrode-tissue interface areas for excellent stimulation and recording properties. This paper presents an approach of increasing the real surface area of the electrodes by creating a surface microstructure. Two major novelties let this work stand out from existing approaches which mainly make use of porous coatings such as platinum black or iridium oxide, or Poly(3,4-ethylenedioxythiophene) (PEDOT). Roughening is carried out by a dry etching process on the silicon electrode core before being coated by a sputtered platinum layer, eliminating complicated deposition processes as for the materials described above. The technology is compatible with any commonly used coating material. In addition, the surface roughening is compatible with high aspect ratio penetrating electrode arrays such as the well-established Utah electrode array, whose unique geometry presents a challenge in the surface modification of active electrode sites. The dry etching process is well characterized and yields a high controllability of pore size and depth. This paper confirms the superior electrochemical properties including impedance, charge injection capacity, and charge storage capacity of surface engineered electrode arrays compared to conventional arrays over a period of 12 weeks. Furthermore, mechanical stability of the modified electrodes was tested by implantation in the brain of a recently deceased rat. In conclusion, the larger interface surface of the electrodes does not only decrease the impedance which should lead to enhanced Signal to noise ratio (SNR) for recording purposes, but also yields higher charge injection capacities, which improve the stimulation characteristics of the implants.

Bipolar Electrode Array Embedded in a Polymer Light-Emitting Electrochemical Cell

Abstract: A linear array of aluminum discs is deposited between the driving electrodes of an extremely large planar polymer light-emitting electrochemical cell (PLEC). The planar PLEC is then operated at a constant bias voltage of 100 V. This promotes in situ electrochemical doping of the luminescent polymer from both the driving electrodes and the aluminum discs. These aluminum discs function as discrete bipolar electrodes (BPEs) that can drive redox reactions at their extremities. Time-lapse fluorescence imaging reveals that p- and n-doping that originated from neighboring BPEs can interact to form multiple light-emitting p–n junctions in series. This provides direct evidence of the working principle of bulk homojunction PLECs. The propagation of p-doping is faster from the BPEs than from the positive driving electrode due to electric field enhancement at the extremities of BPEs. The effect of field enhancement and the fact that the doping fronts only need to travel the distance between the neighboring BPEs to fo...

Influence of electrode array stiffness and diameter on hearing in cochlear implanted guinea pig.

Abstract: During cochlear implantation, electrode array translocation and trauma should be avoided to preserve residual hearing. The aim of our study was to evaluate the effect of physical parameters of the array on residual hearing and cochlear structures during insertion. Three array prototypes with different stiffnesses or external diameters were implanted in normal hearing guinea pigs via a motorized insertion tool carried on a robot-based arm, and insertion forces were recorded. Array prototypes 0.4 and 0.4R had 0.4 mm external diameter and prototype 0.3 had 0.3 mm external diameter. The axial stiffness was set to 1 for the 0.4 prototype and the stiffnesses of the 0.4R and 0.3 prototypes were calculated from this as 6.8 and 0.8 (relative units), respectively. Hearing was assessed preoperatively by the auditory brainstem response (ABR), and then at day 7 and day 30 post-implantation. A study of the macroscopic anatomy was performed on cochleae harvested at day 30 to examine the scala location of the array. At day 7, guinea pigs implanted with the 0.4R array had significantly poorer hearing results than those implanted with the 0.3 array (26±17.7, 44±23.4, 33±20.5 dB, n = 7, vs 5±8.7, 1±11.6, 12±11.5 dB, n = 6, mean±SEM, respectively, at 8, 16 and 24 kHz, p<0.01) or those implanted with the 0.4 array (44±23.4 dB, n = 7, vs 28±21.7 dB, n = 7, at 16 kHz, p<0.05). Hearing remained stable from day 7 to day 30. The maximal peak of insertion force was higher with the 0.4R array than with the 0.3 array (56±23.8 mN, n = 7, vs 26±8.7 mN, n = 6). Observation of the cochleae showed that an incorrectly positioned electrode array or fibrosis were associated with hearing loss ≥40 dB (at 16 kHz). An optimal position in the scala tympani with a flexible and thin array and prevention of fibrosis should be the primary objectives to preserve hearing during cochlear implantation.

High voltage performance of a dc photoemission electron gun with centrifugal barrel-polished electrodes.

Abstract: The design and fabrication of electrodes for direct current (dc) high voltage photoemission electron guns can significantly influence their performance, most notably in terms of maximum achievable bias voltage. Proper electrostatic design of the triple-point junction shield electrode minimizes the risk of electrical breakdown (arcing) along the insulator-cable plug interface, while the electrode shape is designed to maintain <10 MV/m at the desired operating voltage aiming at little or no field emission once conditioned. Typical electrode surface preparation involves diamond-paste polishing by skilled personnel, requiring several weeks of effort per electrode. In this work, we describe a centrifugal barrel-polishing technique commonly used for polishing the interior surface of superconducting radio frequency cavities but implemented here for the first time to polish electrodes for dc high voltage photoguns. The technique reduced polishing time from weeks to hours while providing surface roughness comparab...

Mechanisms of electrode fold-over in cochlear implant surgery when using a flexible and slim perimodiolar electrode array.

Abstract: Objectives: This study evaluates the design of a thin perimodiolar cochlear implant electrode array (CI532) and assesses insertion-related rotation and fold-over.Methods: The study consisted on a cochlear model and temporal bone insertion studies. Twenty insertions were studied, under four different surgical insertion conditions in vitro, the intracochlear disposition of the electrode array and presence of tip fold over were recorded. Also, eight fresh human temporal bones were studied after insertion in two conditions: correct alignment of the electrode array during the insertion and misaligned. These surgical situations were investigated within this study using a video recording of the dynamics of insertion techniques and X-ray, including fluoroscopy, Cone Beam CT, and digital imaging analysis.Results: For electrodes inserted with a correct surgical technique, the placement was perfect, within the scala tympani. The wrapping factor was 0.53, and the perimodiolar distance was below 0.3 mm, with a...

Platform to Enable Combined Measurement of Dopamine and Neural Activity

Abstract: Complex behaviors depend on the coordination of the activities of ensembles of neurons and the release of neuromodulators such as dopamine. The mechanisms underlying such coordination are not well-understood due to a lack of instrumentation for combined and real-time monitoring of neuromodulator release and the activities of large ensembles of neurons. Here we describe a measurement platform that allows for the combined monitoring of electrophysiology from a high-density electrode array and dopamine dynamics from a carbon-fiber microelectrode. Integration of these two measurement systems was achieved through modification of the existing instrumentation. A shared grounded reference electrode was used in both systems to minimize electrical interference. Further, an optional solid-state-relay array positioned between the electrophysiological electrode array and amplifiers was added to provide additional electrical isolation. The capacity of the integrated measurement platform, termed DANA (Dopamine And Neura...

A study on an AC electroosmotic micropump using a square pole – Slit electrode array

Abstract: The paper presents a novel AC electroosmotic micropump using a square pole – slit electrode array called the SS-ACEO-MP. The AC electroosmosis (ACEO) generates convection flows when AC voltage is applied to a liquid such as water with fixed electrodes. The ACEO flow is stable without electrolysis due to the low AC voltage; however, to realize a micropump for wide applications, a special mechanism for a unidirectional flow is required. For that purpose, conventional devices utilize asymmetric electrodes, induced-charge electroosmosis, and traveling wave voltage. For practical applications, high slip velocity due to ACEO is required. The proposed pump consists of a square pole – slit electrode array, and efficiently generates a total flow by the slip velocity mainly on the slit electrodes. The proposed pump features a simple pillar-shaped structure without moving parts, efficient flow generation, and easy improvements of the pressure and the flow rate due to the arrayed structure. First, 3D FEM (finite element method) simulation of the SS-ACEO-MPs was performed and the characteristics were clarified. The size parameters that maximize the effective slip velocity under no load were clarified. Second, the SS-ACEO-MPs were fabricated by a MEMS (micro electro mechanical systems) fabrication process that included electroforming. Third, experiments on the SS-ACEO-MPs were performed. The characteristics of the SS-ACEO-MPs were clarified. Finally, at the applied voltage of 26 Vpp, the maximum effective slip velocity of 1.6 mm/s was realized with a unit size of 0.2 × 0.2 × 0.05 mm3.

In vitro biocompatibility and electrical stability of thick-film platinum/gold alloy electrodes printed on alumina.

Abstract: OBJECTIVE: High-density electrode arrays are a powerful tool in both clinical neuroscience and basic research. However, current manufacturing techniques require the use of specialised techniques and equipment, which are available to few labs. We have developed a high-density electrode array with customisable design, manufactured using simple printing techniques and with commercially available materials. APPROACH: Electrode arrays were manufactured by thick-film printing a platinum-gold alloy (Pt/Au) and an insulating dielectric on 96% alumina ceramic plates. Arrays were conditioned in serum and serum-free conditions, with and without 1kHz, 200µA, charge balanced stimulation for up to 21 days. Array biocompatibility was assessed using an extract assay and a PC-12 cell contact assay. Electrode impedance, charge storage capacity and charge injection capacity were before and after array conditioning. MAIN RESULTS: The manufactured Pt/Au electrodes have a highly porous surface and exhibit electrical properties comparable to arrays manufactured using alternative techniques. Materials used in array manufacture were found to be non-toxic to L929 fibroblasts by extract assay, and neuronal-like PC-12 cells adhered and extended neurites on the array surfaces. Arrays remained functional after long-term delivery of electrical pulses while exposed to protein-rich environments. Charge storage capacities and charge injection capacities increased following stimulation accounted for by an increase in surface index (real surface area) observed by vertical scanning interferometry. Further, we observed accumulation of proteins at the electrode sites following conditioning in the presence of serum. SIGNIFICANCE: This study demonstrates the in vitro biocompatibility of commercially available thick-film printing materials. The printing technique is both simple and versatile, with layouts readily modified to produce customized electrode arrays. Thick-film electrode arrays are an attractive tool that may be implemented for general tissue engineering and neuroscience research.

Prediction of cortical responses to simultaneous electrical stimulation of the retina.

Abstract: Objective Simultaneous electrical stimulation of multiple electrodes has shown promise in diversifying the responses that can be elicited by retinal prostheses compared to interleaved single electrode stimulation. However, the effects of interactions between electrodes are not well understood and clinical trials with simultaneous stimulation have produced inconsistent results. We investigated the effects of multiple electrode stimulation of the retina by developing a model of cortical responses to retinal stimulation. Approach Electrical stimuli consisting of temporally sparse, biphasic current pulses, with amplitudes sampled from a bi-dimensional Gaussian distribution, were simultaneously delivered to the retina across a 42-channel electrode array implanted in the suprachoroidal space of anesthetized cats. Visual cortex activity was recorded using penetrating microelectrode arrays. These data were used to identify a linear-nonlinear model of cortical responses to retinal stimulation. The ability of the model to generalize was tested by predicting responses to non-white patterned stimuli. Main results The model accurately predicted two cortical activity measures: multi-unit neural responses and evoked potential responses to white noise stimuli. The model also provides information about electrical receptive fields, including the relative effects of each stimulating electrode on every recording site. Significance We have demonstrated a simple model that accurately describes cortical responses to simultaneous stimulation of a suprachoroidal retinal prosthesis. Overall, our results demonstrate that cortical responses to simultaneous multi-electrode stimulation of the retina are repeatable and predictable, and that interactions between electrodes during simultaneous stimulation are predominantly linear. The model shows promise for determining optimal stimulation paradigms for exploiting interactions between electrodes to shape neural activity, thereby improving outcomes for patients with retinal prostheses.

Detection of modiolar proximity through bipolar impedance measurements

Abstract: Objectives To test the hypothesis that bipolar electrical impedance measurements in perimodiolar cochlear implants (CIs) may be used to differentiate between perimodiolar insertion technique favoring proximity to the modiolus or lateral wall. Study Design and Methods Bipolar impedances are a measure of electrical resistance between pairs of electrode contacts in a CI. Stimulation is through biphasic pulses at fixed frequency. Impedance measurements were made in real time through sequential sampling of electrode pairs. Perimodiolar electrodes were inserted in temporal bones using one of two techniques: 1) In the standard insertion technique (SIT), the electrode array slides along the lateral wall during insertion. 2) In the Advance Off Stylet (Cochlear Ltd. Sydney) technique (AOS), the electrode maintains modiolar contact throughout the insertion process. A set of 22 insertions were performed in temporal bone specimens using perimodiolar electrode arrays with both AOS and SIT. Buffered saline was used as a substitute for natural perilymph based on similar electrical conductivity properties. Impedance with and without stylet removal were recorded with a 30-second sampling window at final insertion depth. Results There is a significant difference in bipolar impedance measures between AOS and SIT, with impedances rising in measurements with stylet removal. Evaluation was based on two-sided analysis of variance considering technique and electrode with P < 0.025. Conclusion Bipolar electrical impedance can be used to detect relative motion toward the modiolus inside the cochlea. This detection method has the potential to optimize intraoperative placement of perimodiolar electrode arrays during implantation. We anticipate that this will result in lower excitation thresholds and improved hearing outcome. Level of Evidence N/A. Laryngoscope, 2016

Display panel, display device and driving method

Abstract: A display panel, a display device and a driving method are provided. The display panel comprises a touch control driving electrode array including a plurality of touch control driving electrodes; a touch control sensing electrode array including a plurality of touch control sensing electrodes; a force sensing electrode array disposed in a same layer as the touch control sensing electrode array; and at least one force sensing reference electrode. An orthogonal projection of a touch control sensing electrode onto the touch control driving electrode array is at least partially overlapped with the touch control driving electrodes. The force sensing electrode array includes a plurality of force sensing electrodes electrically insulated from the touch control sensing electrodes. An orthogonal projection of the at least one force sensing reference electrode onto the force sensing electrode array is at least partially overlapped with the force sensing electrodes.

High-throughput separation of cells by dielectrophoresis enhanced with 3D gradient AC electric field

Abstract: We propose a novel, high-performance dielectrophoretic (DEP) cell-separation flow chamber with a parallel-plate channel geometry. The flow chamber, consisting of a planar electrode on the top and an interdigitated-pair electrode array at the bottom, was developed to facilitate the separation of cells by creating a nonuniform AC electric field throughout the volume of the flow chamber. The operation and performance of the device were evaluated using live and dead human epithermal breast (MCF10A) cells. The separation dynamics of the cell suspension in the flow chamber was also investigated by numerically simulating the trajectories of individual cells. A theoretical model to describe the dynamic cell behavior under the action of DEP, including dipole-dipole interparticle, viscous, and gravitational forces, was developed. The results demonstrated that the live cells traveling through the flow chamber congregated into sites where the electric field gradient was minimal, in the middle of the flow stream slightly above the centerlines of the grounded electrodes at the bottom. Meanwhile, the dead cells were trapped on the edges of the high-voltage electrodes at the bottom. Cells were thus successfully separated with a remarkably high separation ratio (∼98%) at the appropriately tuned field frequency and applied voltage. The numerically predicted behavior and spatial distribution of the cells during separation also showed good agreement with those observed experimentally.