Topic
Energy conversion efficiency
About: Energy conversion efficiency is a research topic. Over the lifetime, 26738 publications have been published within this topic receiving 740636 citations. The topic is also known as: energy conversion efficiency.
Papers published on a yearly basis
Papers
More filters
TL;DR: A low-temperature vapor-assisted solution process is demonstrated to construct polycrystalline perovskite thin films with full surface coverage, small surface roughness, and grain size up to microscale, paving the way for high reproducibility of films and devices.
Abstract: Hybrid organic/inorganic perovskites (e.g., CH3NH3PbI3) as light absorbers are promising players in the field of third-generation photovoltaics. Here we demonstrate a low-temperature vapor-assisted solution process to construct polycrystalline perovskite thin films with full surface coverage, small surface roughness, and grain size up to microscale. Solar cells based on the as-prepared films achieve high power conversion efficiency of 12.1%, so far the highest efficiency based on CH3NH3PbI3 with the planar heterojunction configuration. This method provides a simple approach to perovskite film preparation and paves the way for high reproducibility of films and devices. The underlying kinetic and thermodynamic parameters regarding the perovskite film growth are discussed as well.
2,136 citations
TL;DR: In this paper, the authors review the processes and limitations that govern device operation of polymer-fullerene BHJ solar cells, with respect to the charge-carrier transport and photogeneration mechanism.
Abstract: Plastic solar cells bear the potential for large-scale power generation based on materials that provide the possibility of flexible, lightweight, inexpensive, efficient solar cells. Since the discovery of the photoinduced electron transfer from a conjugated polymer to fullerene molecules, followed by the introduction of the bulk heterojunction (BHJ) concept, this material combination has been extensively studied in organic solar cells, leading to several breakthroughs in efficiency, with a power conversion efficiency approaching 5 %. This article reviews the processes and limitations that govern device operation of polymer.-fullerene BHJ solar cells, with respect to the charge-carrier transport and photogeneration mechanism. The transport of electrons/holes in the blend is a crucial parameter and must be controlled (e.g., by controlling the nanoscale morphology) and enhanced in order to allow fabrication of thicker films to maximize the absorption, without significant recombination losses. Concomitantly, a balanced transport of electrons and holes in the blend is needed to suppress the build-up of the space-charge that will significantly reduce the power conversion efficiency. Dissociation of electron-hole pairs at the donor/acceptor interface is an important process that limits the charge generation efficiency under normal operation condition. Based on these findings, there is a compromise between charge generation (light absorption) and open-circuit voltage (V-oc) when attempting to reduce the bandgap of the polymer (or fullerene). Therefore, an increase in V-oc of polymer.-fullerene cells, for example by raising the lowest unoccupied molecular orbital level of the fullerene, will benefit cell performance as both fill factor and short-circuit current increase simultaneously.
1,987 citations
TL;DR: In this article, the incident photon to current efficiency (IPCE) of DSCs increases with increase in the haze of the TiO2 electrodes, especially in the near infrared wavelength region.
Abstract: Dye-sensitized solar cells (DSCs) using titanium dioxide (TiO2) electrodes with different haze were investigated. It was found that the incident photon to current efficiency (IPCE) of DSCs increases with increase in the haze of the TiO2 electrodes, especially in the near infrared wavelength region. Conversion efficiency of 11.1%, measured by a public test center, was achieved using high haze TiO2 electrodes. This indicates that raising the haze of TiO2 electrodes is an effective technique for improvement of conversion efficiency.
1,844 citations
Book•
01 Oct 1981
TL;DR: In this paper, the solar source of light energy is described and quantified, along with a review of semiconductor properties and the generation, recombination, and the basic equations of photovoltaic device physics.
Abstract: Solar cell theory, materials, fabrication, design, modules, and systems are discussed. The solar source of light energy is described and quantified, along with a review of semiconductor properties and the generation, recombination, and the basic equations of photovoltaic device physics. Particular attention is given to p-n junction diodes, including efficiency limits, losses, and measurements. Si solar cell technology is described for the production of solar-quality crystals and wafers, and design, improvements, and device structures are examined. Consideration is given to alternate semiconductor materials and applications in concentrating systems, storage, and the design and construction of standalone systems and systems for residential and centralized power generation. Bibtex entry for this abstract Preferred format for this abstract
1,773 citations
TL;DR: In this article, the authors proposed a fabrication technique for dye-sensitized solar cells having a conversion efficiency of global air mass 1.5, 1000 W/m(2) solar light to electric power over 10%.
1,747 citations