scispace - formally typeset
Search or ask a question

Showing papers on "Energy source published in 1997"


Journal ArticleDOI
TL;DR: A mechanism is proposed whereby the interconversions of proline and P5C in different cell types and the associated transfer of redox potential between tissues may constitute a form of metabolic signalling within higher plants.
Abstract: In many plants, free proline accumulates in response to the imposition of a wide range of biotic and abiotic stresses. Controversy has surrounded the extent to which this shift in nitrogen metabolism benefits plants under adverse environmental conditions. Most attempts to account for the phenomenon have focused on the ability of proline to mediate osmotic adjustment, stabilise subcellular structures and scavenge free radicals. However, often the cytoplasmic pool of free proline even after the imposition of stress is insufficient size to account for pronounced biophysical effects. Alternatively, selective preservation of this stress-induced response may relate to endpoints other than simply augmenting the cellular pool of free proline. Proline accumulation may reduce stress-induced cellular acidification or prime oxidative respiration to provide energy needed for recovery. High levels of proline synthesis during stress may maintain NAD(P)+/NAD(P)H ratios at values compatible with metabolism under normal conditions. Consideration of the cofactor preference of plant Δ1-pyrroline-5-carboxylate (P5C) reductase as well as the in vivo concentrations of the two pyridine nucleotide cofactors and their respective redox ratios suggests that even a small increase in proline biosynthesis might have a large impact on the level of reduction of the cellular NADP pool. The increased NADP+/NADPH ratio mediated by proline biosynthesis is likely to enhance activity of the oxidative pentose phosphate pathway. This would provide precursors to support the demand for increased secondary metabolite production during stress as well as nucleotide synthesis accompanying the accelerated rate of cell division upon relief from stress, when oxidation of proline is likely to provide an important energy source for ADP phosphorylation. Thus, the extreme sensitivity of the metabolic processes of proline synthesis and degradation themselves may be of benefit by regulating metabolic processes adversely affected by stress. This viewpoint is supported by consideration of other physiological phenomena not directly related to stress responses, but in which proline metabolism may also play a regulatory role. A mechanism is proposed whereby the interconversions of proline and P5C in different cell types and the associated transfer of redox potential between tissues may constitute a form of metabolic signalling within higher plants. Stress-related alterations in proline metabolism may impinge on systems of redox control of plant gene expression.

1,410 citations


Patent
14 May 1997
TL;DR: In this article, an electrosurgical instrument is provided for cauterization and welding of tissue of varying impedance, thickness and vascularity especially in the performance of endoscopic procedures, where the instrument compresses the tissue between one pole of a bipolar energy source located on one interfacing surface, and a second pole applying pressure in a predetermined range.
Abstract: An electrosurgical instrument is provided for cauterization and/or welding of tissue of varying impedance, thickness and vascularity especially in the performance of endoscopic procedures. The instrument compresses the tissue between one pole of a bipolar energy source located on one interfacing surface, and a second interfacing surface applying pressure in a predetermined range. A second pole is located one of the two interfacing surfaces. In a preferred embodiment, the second pole is located on the same interfacing surface as the first pole and an insulator electrically isolates the two poles. A preferred application of the invention is in a cutting instrument wherein a hemostatic line is formed along a cut line using RF energy.

1,081 citations


Patent
14 May 1997
TL;DR: In this article, an electrosurgical instrument is provided for cauterization and welding of tissue of varying impedance, thickness and vascularity especially in the performance of endoscopic procedures, where the instrument compresses the tissue between one pole of a bipolar energy source located on one interfacing surface, and a second surface applying pressure in a predetermined range wherein one of the interfacing surfaces is positioned on an anvil with a specified preload and spring rate.
Abstract: An electrosurgical instrument is provided for cauterization and/or welding of tissue of varying impedance, thickness and vascularity especially in the performance of endoscopic procedures. The instrument compresses the tissue between one pole of a bipolar energy source located on one interfacing surface, and a second interfacing surface applying pressure in a predetermined range wherein one of the interfacing surfaces is positioned on an anvil with a specified preload and spring rate. A second pole is located one of the two interfacing surfaces. In a preferred embodiment, the second pole is located on the same interfacing surface as the first pole and an insulator electrically isolates the two poles. A preferred application of the invention is in a cutting instrument wherein a hemostatic line is formed along a cut line using RF energy.

933 citations


Patent
04 Apr 1997
TL;DR: An electrosurgical instrument is provided for cauterization and/or welding of tissue of varying impedances, thicknesses and vascularity especially in the performance of endoscopic procedures as discussed by the authors.
Abstract: An electrosurgical instrument is provided for cauterization and/or welding of tissue of varying impedances, thicknesses and vascularity especially in the performance of endoscopic procedures. The instrument compresses the tissue between one pole of a bipolar energy source located on one interfacing surface, and a second interfacing surface. A second pole is located one of the two interfacing surfaces. In a preferred embodiment, the second pole is located on the same interfacing surface as the first pole and an insulator electrically isolates the two poles. A preferred application of the invention is in a cutting instrument wherein a hemostatic line is formed along a cut line using RF energy.

918 citations


Patent
11 Mar 1997
TL;DR: A biosensing transponder for implantation in an organism including a human comprises a biosensor for sensing one or more physical properties related to the organism after the device has been implanted, including optical, mechanical, chemical, and electrochemical properties as mentioned in this paper.
Abstract: A biosensing transponder for implantation in an organism including a human comprises a biosensor for sensing one or more physical properties related to the organism after the device has been implanted, including optical, mechanical, chemical, and electrochemical properties, and a transponder for wirelessly transmitting data corresponding to the sensed parameter value to a remote reader. Disclosed embodiments utilize temperature sensors, strain sensors, pressure sensors, magnetic sensors, acceleration sensors, ionizing radiation sensors, acoustic wave sensors, chemical sensors including direct chemical sensors and dye based chemical sensors, and photosensors including imagers and integrated spectrophotometers. The transponder includes an energy coupler for wirelessly energizing the device with a remote energy source, and a control circuit for controlling and accessing the biosensor and for storing identifying data. The energy coupler can be an inductive circuit for coupling electromagnetic energy, a photoelectric transducer for coupling optical energy, or a piezoelectric transducer for coupling ultrasonic energy. The control circuit can be configured to delay, either randomly or by a fixed period of time, transmission of data indicative of the sensed parameter value to thereby prevent a data collision with an adjacent like device. Methods for using an implantable biosensing transponder include the steps of associating the device with an implant, including temporary implants, prostheses, and living tissue implants, physically attaching the device to a flexible catheter, sensing parameter values in an organism, and transmitting data corresponding to the sensed parameter values to a remote reader.

871 citations


Journal ArticleDOI
01 Sep 1997-Glia
TL;DR: The properties, regulation, cell‐specific location, and kinetic characteristics of the isoforms, their potential contributions to cerebral metabolism, and several experimental paradigms in which alterations in energetic demand and/or substrate supply affect glucose transporter expression are discussed.
Abstract: Glucose is the principle energy source for the mammalian brain. Delivery of glucose from the blood to the brain requires transport across the endothelial cells of the blood-brain barrier and into the neurons and glia. The facilitative glucose transporter proteins mediate these processes. The primary isoforms in brain are GLUT1, detected at high concentrations as a highly glycosylated form, (55 kDa) in blood-brain barrier, and also as a less glycosylated, 45 kDa form, present in parenchyma, predominantly glia; GLUT3 in neurons; and GLUT5 in microglia. The rest of the transporter family, GLUTs 2, 4, and 7, have also been detected in brain but at lower levels of expression and confined to more discrete regions. All of the transporters probably contribute to cerebral glucose utilization, as part of overall metabolism and metabolic interactions among cells. We discuss the properties, regulation, cell-specific location, and kinetic characteristics of the isoforms, their potential contributions to cerebral metabolism, and several experimental paradigms in which alterations in energetic demand and/or substrate supply affect glucose transporter expression.

620 citations


01 Jan 1997
TL;DR: In this article, anaerobic digestion of energy crops and organic wastes is used to produce a clean fuel from renewable feedstocks, which would replace fossil fuel-derived energy and reduce environmental impacts including global warming and acid rain.
Abstract: Production of methane via anaerobic digestion of energy crops and organic wastes would benefit society by providing a clean fuel from renewable feedstocks. This would replace fossil fuel-derived energy and reduce environmental impacts including global warming and acid rain. Although biomass energy is more costly than fossil fuel-derived energy, trends to limit carbon dioxide and other emissions through emission regulations, carbon taxes, and subsidies of biomass energy would make it cost competitive. Methane derived from anaerobic digestion is competitive in eAciencies and costs to other biomass energy forms including heat, synthesis gases, and ethanol. 7 2000 Elsevier Science Ltd. All rights reserved.

501 citations


Journal ArticleDOI
TL;DR: The ability of fasting to deactivate this presumed physiological satiety system may have been advantageous in environments characterized by rapid changes in food availability, but that the reduction in leptin levels with ongoing fasting is disproportionate to the reduce in adipose mass.
Abstract: The factors responsible for the variability in plasma leptin levels observed among individuals with similar body compositions remain unclear. To examine the impact of dietary variables, we compared the changes in leptin levels induced by fasting and dietary fat restriction with the expected decrease following a significant loss in adipose mass. A 21.4 +/- 3.7% weight loss led to a 76.3 +/- 8.1% decrease in mean plasma leptin level (25.2 +/- 9.3 to 6.1 +/- 3.4 ng/mL, P = 0.0001) in a group of 9 obese males. Despite a weight loss of only 2.6 +/- 0.8%, mean plasma leptin levels fell by 61.9 +/- 25.2% (8.5 +/- 4.5 to 2.4 +/- 0.5 ng/mL, P < 0.01) in 7 nonobese females subjected to 3 days of fasting. Leptin levels in fasted subjects returned to baseline within 12 h of refeeding. Individual high- and low-fat meals given to 19 subjects after an overnight fast had no effect on plasma leptin levels. Reduction in dietary fat content from 37-10% of total calories for 7 weeks was also without effect on plasma leptin levels in these subjects. We conclude that plasma leptin levels primarily reflect total adipose mass, rather than meal consumption or dietary energy source, but that the reduction in leptin levels with ongoing fasting is disproportionate to the reduction in adipose mass. The ability of fasting to deactivate this presumed physiological satiety system may have been advantageous in environments characterized by rapid changes in food availability.

451 citations


Patent
14 Mar 1997
TL;DR: In this paper, an ablation apparatus with a handpiece, an electrode, a probe, a thermal sensor, and an energy source is presented, where the probe is at least partially positionable in the electrode lumen and configured to be advanced and retracted.
Abstract: An ablation apparatus includes a handpiece, an electrode extending from a handpiece distal end, a probe, a thermal sensor and an energy source. The electrode includes a distal end and a lumen, a cooling medium inlet conduit and a cooling medium exit conduit. Both conduits extend through the electrode lumen to an electrode distal end. A sidewall port, isolated from a cooling medium flowing in the inlet and outlet conduits, is formed in the electrode. The probe is at least partially positionable in the electrode lumen and configured to be advanced and retracted in and out of the sidewall aperture. The thermal sensor is supported by the probe. The electrode is coupled to an energy source.

405 citations


Journal ArticleDOI
TL;DR: The first Zn(II)-translocating P-type ATPase has been identified as the product of o732, a potential gene identified in the sequencing of the Escherichia coli genome, which was disrupted by insertion of a kanamycin gene through homologous recombination.
Abstract: The first Zn(II)-translocating P-type ATPase has been identified as the product of o732, a potential gene identified in the sequencing of the Escherichia coli genome. This gene, termed zntA, was disrupted by insertion of a kanamycin gene through homologous recombination. The mutant strain exhibited hypersensitivity to zinc and cadmium salts but not salts of other metals, suggesting a role in zinc homeostasis in E. coli. Everted membrane vesicles from a wild-type strain accumulated 65Zn(II) and 109Cd(II) by using ATP as an energy source. Transport was sensitive to vanadate, an inhibitor of P-type ATPases. Membrane vesicles from the zntA∷kan strain did not accumulate those metal ions. Both the sensitive phenotype and transport defect of the mutant were complemented by expression of zntA on a plasmid.

382 citations


01 Jan 1997
TL;DR: The first Zn(II)-translocating P-type AT-Pase has been identified as the product of o732, a potential gene identified in the sequencing of the Escherichia coli genome as discussed by the authors.
Abstract: The first Zn(II)-translocating P-type AT- Pase has been identified as the product of o732, a potential gene identified in the sequencing of the Escherichia coli genome. This gene, termed zntA, was disrupted by insertion of a kanamycin gene through homologous recombination. The mutant strain exhibited hypersensitivity to zinc and cadmium salts but not salts of other metals, suggesting a role in zinc homeostasis in E. coli. Everted membrane vesicles from a wild-type strain accumulated 65 Zn(II) and 109 Cd(II) by using ATP as an energy source. Transport was sensitive to vanadate, an inhibitor of P-type ATPases. Membrane vesicles from the zntA::kan strain did not accumulate those metal ions. Both the sensitive phenotype and transport defect of the mutant were complemented by expression of zntA on a plasmid.

Journal ArticleDOI
TL;DR: The results suggest that active efflux, presumably coded by a chromosomal gene(s), may play a major role in silver resistance, which is likely to be enhanced synergistically by decreases in OM permeability.
Abstract: Silver-resistant mutants were selected by stepwise exposure of silver-susceptible clinical strains of Escherichia coli, two of which did not contain any plasmids, to either silver nitrate or silver sulfadiazine. These mutants showed complete cross-resistance to both compounds. They showed low-level cross-resistance to cephalosporins and HgCl2 but not to other heavy metals. The Ag-resistant mutants had decreased outer membrane (OM) permeability to cephalosporins, and all five resistant mutants tested were deficient in major porins, either OmpF or OmpF plus OmpC. However, the well-studied OmpF- and/or OmpC-deficient mutants of laboratory strains K-12 and B/r were not resistant to either silver compound. Resistant strains accumulated up to fourfold less (110m)AgNO3 than the parental strains. The treatment of cells with carbonyl cyanide m-chlorophenylhydrazone increased Ag accumulation in Ag-susceptible and -resistant strains, suggesting that even the wild-type Ag-susceptible strains had an endogenous Ag efflux activity, which occurred at higher levels in Ag-resistant mutants. The addition of glucose as an energy source to starved cells activated the efflux of Ag. The results suggest that active efflux, presumably coded by a chromosomal gene(s), may play a major role in silver resistance, which is likely to be enhanced synergistically by decreases in OM permeability.

Journal ArticleDOI
TL;DR: In the US, the Clinton Administration proposed amendments to the Clean Air Act that would require gasoline sold in the nine most polluted US cities to contain additives from renewable sources, such as grain alcohol.
Abstract: iofuels are widely seen as a feasible alternative to oil. Indeed, in 1995 the Clinton Administration proposed amendments to the Clean Air Act that would require gasoline sold in the nine most polluted US cities to contain additives from renewable sources, such as grain alcohol. This move, even if blocked by a three-judge panel of the US Court of Appeals in Washington, DC (Southerland 1995), has helped to focus attention on the question of whether research and development in biofuel production from agricultural crops should be increased (e.g., Abelson 1995). In Europe, similar fiscal and regulatory provisions have already been introduced (Chartier and Savanne 1992, Sourie et al. 1992). These policies assume that biofuels have the potential to reduce current dependence of industrialized societies on rapidly disappearing fossil energy stocks and that biofuels are desirable from an ecological point of view. But are these assumptions correct?

Journal ArticleDOI
06 Mar 1997-Nature
TL;DR: In this article, the authors present evidence for the presence of spatially discrete microbial communities in Cretaceous rocks and advance a mechanism for the long-term survival of these subterranean communities.
Abstract: Deep subsurface microbial communities1 are believed to be supported by organic matter that was either deposited with the formation sediments or which migrated from the surface along groundwater flowpaths. Investigation has therefore focused on the existence of microorganisms in recently deposited or highly permeable sediments2,3. Fewer reports have focused on consolidated rocks4–7. These findings have often been limited by inadequate tracer methodology or non-sterile sampling techniques. Here we present evidence for the presence of spatially discrete microbial communities in Cretaceous rocks and advance a mechanism for the long-term survival of these subterranean communities. Samples were collected using aseptic methods and sensitive tracers8. Our results indicate that the main energy source for these communities is organic material trapped within shales. Microbial activity in shales appears to be greatly reduced, presumably because of their restrictive pore size9. However, organic material or its fermentation products could diffuse into adjacent, more permeable sandstones, where microbial activity was much more abundant. This process resulted in the presence of microbial communities at sandstone–shale interfaces. These microorganisms presumably ferment organic matter and carry out sulphate reduction and acetogenesis.

Patent
24 Jun 1997
TL;DR: In this paper, a percutaneous method of repairing a fissure in the annulus pulposus comprises placing an energy source adjacent to the fissures and providing sufficient energy to the Fissure to raise the temperature to at least about 45-70°C. and for a sufficient time to cause the collagen to weld.
Abstract: A percutaneous method of repairing a fissure in the annulus pulposus comprises placing an energy source adjacent to the fissure and providing sufficient energy to the fissure to raise the temperature to at least about 45-70° C. and for a sufficient time to cause the collagen to weld. An intervertebral fissure also can be treated by placing a catheter with a lumen adjacent to the fissure and injecting sealant into the fissure via the catheter, thereby sealing the fissure. An intervertebral fissure additionally can be treated by providing a catheter having a distal end, a proximal end, a longitudinal axis, and an intradiscal section at the catheter's distal end on which there is at least one functional element. The next step is applying a force longitudinally to the proximal of the catheter which is sufficient to advance the intradiscal section through the nucleus pulposus and around an inner wall of an annulus fibrosus, but which force is insufficient to puncture the annulus fibrosus. Next the functional element is positioned at a selected location of the disc by advancing or retracting the catheter and optionally twisting the proximal end of the catheter. Then the functional unit treats the annular fissure. Optionally, there is an additional step of adding a substance to seal the fissure. An externally guidable intervertebral disc apparatus also is disclosed.

Journal ArticleDOI
TL;DR: Energy sources for polymer synthesis are explored here, with a particular focus on mechanisms by which self-assembled molecular aggregates could capture the energy and use it to form chemical bonds in polymers.
Abstract: The first systems of molecules having the properties of the living state presumably self-assembled from a mixture of organic compounds available on the prebiotic Earth. To carry out the polymer synthesis characteristic of all forms of life, such systems would require one or more sources of energy to activate monomers to be incorporated into polymers. Possible sources of energy for this process include heat, light energy, chemical energy, and ionic potentials across membranes. These energy sources are explored here, with a particular focus on mechanisms by which self-assembled molecular aggregates could capture the energy and use it to form chemical bonds in polymers. Based on available evidence, a reasonable conjecture is that membranous vesicles were present on the prebiotic Earth and that systems of replicating and catalytic macromolecules could become encapsulated in the vesicles. In the laboratory, this can be modeled by encapsulated polymerases prepared as liposomes. By an appropriate choice of lipids, the permeability properties of the liposomes can be adjusted so that ionic substrates permeate at a sufficient rate to provide a source of monomers for the enzymes, with the result that nucleic acids accumulate in the vesicles. Despite this progress, there is still no clear mechanism by which the free energy of light, ion gradients, or redox potential can be coupled to polymer bond formation in a protocellular structure.

Journal ArticleDOI
TL;DR: In this paper, the authors outline a standard methodology for comparing the greenhouse gas balances of bioenergy systems with those of fossil energy systems, focusing on a careful definition of system boundaries, and give some recommendations on how bio-energy systems should be optimized from a greenhouse gas emissions point of view.
Abstract: In this paper, which was prepared as part of IEA Bioenergy Task XV (“Greenhouse Gas Balances of Bioenergy Systems”), we outline a standard methodology for comparing the greenhouse gas balances of bioenergy systems with those of fossil energy systems. Emphasis is on a careful definition of system boundaries. The following issues are dealt with in detail: time interval analysed and changes of carbon stocks; reference energy systems; energy inputs required to produce, process and transport fuels; mass and energy losses along the entire fuel chain; energy embodied in facility infrastructure; distribution systems; cogeneration systems; by-products; waste wood and other biomass waste for energy; reference land use; and other environmental issues. For each of these areas recommendations are given on how analyses of greenhouse gas balances should be performed. In some cases we also point out alternative ways of doing the greenhouse gas accounting. Finally, the paper gives some recommendations on how bioenergy systems should be optimized from a greenhouse-gas-emissions point of view.

Book
29 Dec 1997
TL;DR: In this article, the authors present an overview of the main features of a greenhouse, including the plant and radiation, water, water supply, water demand, and water consumption in the greenhouse.
Abstract: Introduction Definition Some General Characterizations: Relationship to the Particular Country. Energy, Capital, and Labor Requirements. Return to the Grower. Size. Extent. Special Peculiarity of Greenhouses. Questions to Answer in Starting a Greenhouse About the Future Structures: Locations, Styles, and Structures Climatic Considerations and Location Site Selection Arrangement: Service Facilities. Orientation Superstructures: Design and Standards. Structures, Materials, and Methods. Coverings: Plastics. Glass. Special Variations. Peril to the Structure: Wind. Hail. Fire. Snow. Miscellaneous Perils. Interior Arrangements: Longitudinal Arrangements. Penninsular and Other Types. Movable Arrangements. Costs Radiation Radiation Basics: The Electromagnetic Spectrum. Quanta. Terminology. Conversions. Measuring Radiation. Solar Radiation Radiation and the Greenhouse: Coverings and Energy Transfer. Structure and Total Transmissivity. Modifications to Increase or Modify Irradiance. The Plant and Radiation: Radiation Interception by the Canopy. Photosynthesis and Radiation. Photomorphogenesis. Temperature The Plant and Thermomorphogenesis: Plant Temperature. The Effects of Temperature. Temperature and Its Measurement Temperature Manipulation in the Greenhouse: Heat Losses and Requirements of the Structure. Heating Systems and Energy Sources. Ventilation and Cooling. Temperature Variations Inside Greenhouses. Water Water and Plant Response: Basics and Units of Water Potential. Effects of Stress on Growth. Water Supply: The Root System. Factors Limiting Root Activity. Field Soils. Water Movement into Soils and Irrigation Frequency. Measuring Soil Moisture Content. Water Relationships. Hydroponics. Irrigation Systems. Automatic Control of Irrigation. Water Demand: Transpiration Units and Quantities. Transpiration. Humidity. Calculation of Transpiration Rate. Summary. Nutrition Units and Terminology: Concentration. Activity. Equivalency. Acidity. Oxidation-Reduction. Adsorption-Desorption in Soils. Mass Exchange Equlibria. Electrical Conductivity. Comments on Logarithms. Nutrients in the Plant and Tissue Analysis: Definitions of Nutrient Requirements. Published Nutrient Values in Tissue. Factors Affecting Plant Nutrient Concentrations. Plant Nutrient Uptake and Ionic Interactions. Nutrient Distribution and Tissue Sampling. Diagnosis from Tissue Sampling. Nutrient Supply: The Root Environment. Basic Fertility Relationships. Carbonates and pH Control. Chelation and Micronutrients. Macronutrient Fertilization and Control. Soil Analysis. Salinity and Irrigation Water Quality: Salinity. Irrigation Water Quality and Manipulation. Environmental Contamination from Greenhouses. Carbon Dioxide Units and Measurements for CO2: Units of Concentration. CO2 Measurement. CO2 Physiology: CO2 Fixation. Review of Radiation Measurements. Review of Temperature Relationships. Effects of Leaf Age and Nutrition. Effect of CO2 Concentrations. The Vegetative Canopy and CO2 Uptake. Crop Response to CO2 Enrichment. CO2 Sources and Problems with Pollution: Pure CO2. Combustion. Organic Matter Decomposition. Problems of Pollutants form Combustion Sources. CO2 Distribution and Concentration in Greenhouses CO2 Control: The Climatic Influence. Raising Temperatures. Intermittent CO2 Injection. Dutch Guidelines. Heat from Combustion. Daily Injection Periods. Enrichment at Full Ventilation. Climate Control Background and Development Greenhouse Climate and Control: Control Requirements. Greenhouse Climate. Some Basics of Control. Sensors in the Greenhouse. The Computer: Advantages of Computers and Possibilities. Software, the Guiding Reins. Intercommunication. Optimization and Modeling: Requirements. Examples of Limited Approaches. Models. Complete Models. Appendix A: Symbolism, Physical Constants, Units Appendix B: Miscellaneous Conversions, cgs-English Index Chapters also contain Introduction and Reference sections.

Patent
17 Nov 1997
TL;DR: In this article, an ablation apparatus includes an introducer with a distal end sufficiently sharp to penetrate tissue, and a cable couples the energy source to the energy delivery device, including a first electrode and a second electrode each with a tissue piercing distal portion.
Abstract: An ablation apparatus includes an introducer with a distal end sufficiently sharp to penetrate tissue. An energy delivery device is configured to be coupled to an energy source. The energy delivery device includes a first electrode and a second electrode each with a tissue piercing distal portion. The first and second electrodes are at least partially positionable in the introducer and deployable from the introducer at a selected tissue site to an expanded state. In the expanded state the deployed first and second electrodes distend laterally away from the introducer with a radius of curvature to form a shaped array of deployed electrodes at the tissue site when positioned at the selected tissue site. The first electrode distal portion and the second electrode distal portion are each at least partially made of a shaped memory alloy material that displays stress induced martensite behavior above body temperature. A cable couples the energy source to the energy delivery device.

Journal ArticleDOI
TL;DR: The outlined approach finds an optimum operation strategy for a hybrid system by carrying out a search through possible options for the system operation control, conducted over some time period using estimated weather and demand data and long-term system component characteristics.

Journal ArticleDOI
TL;DR: In acetate-fed, anaerobic-aerobic alternated bioreactors, the P C feeding ratio was found to be a key factor influencing an “internal energy-based” competition between polyphosphate-accumulating bacteria (PAB) that mediate biological phosphorus removal and glycogen-accuming bacteria (GAP) that do not.

Journal ArticleDOI
TL;DR: This work considers the problem of communications over a wireless channel in support of data transmissions from the perspective of small portable devices that must rely on limited battery energy, and proposes a simple probing scheme and a modified scheme that yields slightly better performance but requires some additional complexity.
Abstract: We consider the problem of communications over a wireless channel in support of data transmissions from the perspective of small portable devices that must rely on limited battery energy. We model the channel outages as statistically correlated errors. Classic ARQ strategies are found to lead to a considerable waste of energy, due to the large number of transmissions. The use of finite energy sources in the face of dependent channel errors leads to new protocol design criteria. As an example, a simple probing scheme, which slows down the transmission rate when the channel is impaired, is show? to be more energy efficient, with a slight loss in throughput. A modified scheme that yields slightly better performance but requires some additional complexity is also studied. Some references on the modeling of battery cells are discussed to highlight the fact that battery charge capacity is strongly influenced by the available "relaxation time" between current pulses. A formal approach that can track complex models for power sources, including dynamic charge recovery, is also developed.

Journal ArticleDOI
01 Sep 1997-Glia
TL;DR: Using [U‐13C]lactate and NMR spectroscopy, it is shown that lactate that can be produced in astrocytes can be taken up into neurons and metabolized through the TCA‐cycle leading to labeling of TCA cycle intermediates plus amino acids derived from these.
Abstract: Net synthesis of the neurotransmitter amino acids glutamate and GABA can take place either from glutamine or from alpha-ketoglutarate or another tricarboxylic acid (TCA) cycle intermediate plus an amino acid as donor of the amino group. Since neurons lack the enzymes glutamine synthetase and pyruvate carboxylase that are expressed only in astrocytes, trafficking of these metabolites must take place between neurons and astrocytes. Moreover, it is likely that astrocytes play an important role in maintaining the energy status in neurons supplying energy substrates, e.g., in the form of lactate. The role of trafficking of glutamine, TCA cycle constituents as well as the role of lactate as an energy source in neurons is discussed. Using [U-13C] lactate and NMR spectroscopy, it is shown that lactate that can be produced in astrocytes can be taken up into neurons and metabolized through the TCA-cycle leading to labeling of TCA cycle intermediates plus amino acids derived from these. The labeling pattern of glutamate and GABA indicates that C atoms from lactate remain in the cycle for several turns and that GABA formation may involve more than one glutamate pool, i.e., that compartmentation may exist. Additionally, a possible role of citrate as a chelator of Zn++ with regard to neuronal excitation is discussed. Astrocytes produce large quantities of citrate which by chelation of Zn++ alters the excitable state of neurons via regulation of N-methyl-D-aspartate receptor activity. Thus, astrocytes may regulate neuronal activity at a number of different levels.

Journal ArticleDOI
TL;DR: Results identify a transcriptional regulatory mechanism involved in the reinduction of a fetal metabolic program during pressure overload-induced cardiac hypertrophy.
Abstract: During cardiac hypertrophy, the chief myocardial energy source switches from fatty acid β-oxidation (FAO) to glycolysis—a reversion to fetal metabolism. The expression of genes encoding myocardial FAO enzymes was delineated in a murine ventricular pressure overload preparation to characterize the molecular regulatory events involved in the alteration of energy substrate utilization during cardiac hypertrophy. Expression of genes involved in the thioesterification, mitochondrial import, and β-oxidation of fatty acids was coordinately down-regulated after 7 days of right ventricular (RV) pressure overload. Results of RV pressure overload studies in mice transgenic for the promoter region of the gene encoding human medium-chain acyl-CoA dehydrogenase (MCAD, which catalyzes a rate-limiting step in the FAO cycle) fused to a chloramphenicol acetyltransferase reporter confirmed that repression of MCAD gene expression in the hypertrophied ventricle occurred at the transcriptional level. Electrophoretic mobility-shift assays performed with MCAD promoter fragments and nuclear protein extracts prepared from hypertrophied and control RV identified pressure overload-induced protein/DNA interactions at a regulatory unit shown previously to confer control of MCAD gene transcription during cardiac development. Antibody “supershift” studies demonstrated that members of the Sp (Sp1, Sp3) and nuclear hormone receptor [chicken ovalbumin upstream promoter transcription factor (COUP-TF)/erbA-related protein 3] families interact with the pressure overload-responsive unit. Cardiomyocyte transfection studies confirmed that COUP-TF repressed the transcriptional activity of the MCAD promoter. The DNA binding activities and nuclear expression of Sp1/3 and COUP-TF in normal fetal mouse heart were similar to those in the hypertrophied adult heart. These results identify a transcriptional regulatory mechanism involved in the reinduction of a fetal metabolic program during pressure overload-induced cardiac hypertrophy.

Patent
12 Mar 1997
TL;DR: In this paper, the authors present a system for ablating tissue within a body, the system having: an energy source providing a level of energy which is non damaging to the cellular structures of the body tissue, a catheter coupled to the energy source, the catheter having an electrode; and means for sensing the temperature of the electrode while also sensing the amount of energy that is delivered to the electrode.
Abstract: The present invention is a system for ablating tissue within a body, the system having: an energy source providing a level of energy which is non damaging to the cellular structures of the body tissue, a catheter coupled to the energy source, the catheter having an electrode; and means for sensing the temperature of the electrode while also sensing the amount of energy which is non damaging to the cellular structures of the body tissue is delivered to the electrode, the sensing means coupled to the catheter and coupled to the energy source wherein the degree to which the electrode contacts the heart tissue (e.g. no contact, moderate contact, good contact or excellent contact) may be determined.

Journal ArticleDOI
TL;DR: It is suggested that glyoxisomes, with the assistance of mitochondria, fuse and digest oil bodies one at a time, while the remaining oil bodies are preserved intact during the whole period of germination.
Abstract: Plant seeds store triacylglycerols as energy sources for germination and postgerminative growth of seedlings. The triacylglycerols are preserved in small, discrete, intracellular organelles called oil bodies. A new method was developed to purify seed oil bodies. The method included extraction, flotation by centrifugation, detergent washing, ionic elution, treatment with a chaotropic agent, and integrity testing by use of hexane. These processes subsequently removed non-specifically associated or trapped proteins within the oil bodies. Oil bodies purified by this method maintained their integrity and displayed electrostatic repulsion and steric hindrance on their surface. Compared with the previous procedure, this method allowed higher purification of oil bodies, as demonstrated by SDS-PAGE using five species of oilseeds. Oil bodies purified from sesame were further analyzed by two-dimensional gel electrophoresis and revealed two potential oleosin isoforms. The integrity of oil bodies in germinating sesame seedlings was examined by hexane extraction. Our results indicated that consumption of triacylglycerols reduced gradually the total amount of oil bodies in seedlings, whereas no alteration was observed in the integrity of remaining oil bodies. This observation implies that oil bodies in germinating seeds are not degraded simultaneously. It is suggested that glyoxisomes, with the assistance of mitochondria, fuse and digest oil bodies one at a time, while the remaining oil bodies are preserved intact during the whole period of germination.

Journal ArticleDOI
TL;DR: It is shown that these three genes (ptsG, ptsH, and ptsI) form an operon, the expression of which is inducible by glucose, and that expression of this operon is subject to negative autoregulation by the glucose permease, which is the ptsG gene product.
Abstract: Glucose is the preferred carbon and energy source of Bacillus subtilis. It is transported into the cell by the glucose-specific phosphoenolpyruvate:sugar phosphotransferase system (PTS) encoded by the ptsGHI locus. We show here that these three genes (ptsG, ptsH, and ptsI) form an operon, the expression of which is inducible by glucose. In addition, ptsH and ptsl form a constitutive ptsHI operon. The promoter of the ptsGHI operon was mapped and expression from this promoter was found to be constitutive. Deletion mapping of the promoter region revealed the presence of a transcriptional terminator as a regulatory element between the promoter and coding region of the ptsG gene. Mutations within the ptsG gene were characterized and their consequences on the expression of ptsG studied. The results suggest that expression of the ptsGHI operon is subject to negative autoregulation by the glucose permease, which is the ptsG gene product. A regulatory gene located upstream of the ptsGHI operon, termed glcT, was also identified. The GlcT protein is a novel member of the BglG family of transcriptional antiterminators and is essential for the expression of the ptsGHI operon. A deletion of the terminator alleviates the need for GlcT. The activity of GlcT is negatively regulated by the glucose permease.

Journal ArticleDOI
01 Aug 1997-Gut
TL;DR: Bowel transit rate is a determinant of stool SCFA concentration including butyrate and distal colonic pH, which may explain the inter-relations between colonic cancer, dietary fibre intake, stool output, and stool pH.
Abstract: Background —Populations at low risk of colonic cancer consume large amounts of fibre and starch and pass acid, bulky stools One short chain fatty acid (SCFA), butyrate, is the colon’s main energy source and inhibits malignant transformation in vitro Aim —To test the hypothesis that altering colonic transit rate alters colonic pH and the SCFA content of the stools Patients —Thirteen healthy adults recruited by advertisement Methods —Volunteers consumed, in turn, wheat bran, senna and loperamide, each for nine days with a two week washout period between study periods, dietary intake being unchanged Before, and in the last four days of each intervention, whole gut transit time (WGTT), defaecation frequency, stool form, stool β-glucuronidase activity, stool pH, stool SCFA concentrations and intracolonic pH (using a radiotelemetry capsule for continuous monitoring) were assessed Results —WGTT decreased, stool output and frequency increased with wheat bran and senna, vice versa with loperamide The pH was similar in the distal colon and stool Distal colonic pH fell with wheat bran and senna and tended to increase with loperamide Faecal SCFA concentrations, including butyrate, increased with senna and fell with loperamide With wheat bran the changes were non-significant, possibly because of the short duration of the study Baseline WGTT correlated with faecal SCFA concentration ( r =−0511, p=0001), with faecal butyrate ( r =−0577, p r =0359, p=0029) Conclusion —Bowel transit rate is a determinant of stool SCFA concentration including butyrate and distal colonic pH This may explain the inter-relations between colonic cancer, dietary fibre intake, stool output, and stool pH

Journal ArticleDOI
TL;DR: It is demonstrated that thermal shrink age of bovine knee capsule correlates with denatur ation of collagen fibers and depends on both time and temperature.
Abstract: Orthopaedic surgeons have recently adapted the holmium: yttrium-aluminum-garnet (YAG) laser for the shrinkage of capsular tissues for treatment of glenohumeral instability. The molecular mechanism of capsular shrinkage has not been documented to date. This study examined the effects of heating on bovine calf knee capsule and subsequent shrinkage of the capsule. Capsule specimens were placed in a saline bath at temperatures ranging from 55 degrees to 75 degrees C for 1, 3, 5, and 10 minutes. Shrinkage was quantified by digital imaging, and the tissue was examined by light and polarized light microscopy. Tissue contraction was not measurable at or below 57.5 degrees C. At 60 degrees C, tissue shrinkage occurred with corresponding basophilic staining and loss of birefringence in collagen fibers. For specimens heated at 60 degrees C and 62 degrees C, shrinkage directly correlated with duration of thermal exposure. Maximal shrinkage of approximately 50% in length occurred at and above 65 degrees C with thermal exposures of 1 minute or greater. This study demonstrates that thermal shrinkage of bovine knee capsule correlates with denaturation of collagen fibers and depends on both time and temperature. Capsular shrinkage treatments may be performed with any energy source that is capable of well-controlled heating of capsular tissue and does not depend on the special properties of laser light.

Journal ArticleDOI
TL;DR: The results indicate that E. coli oxidises propionate to pyruvate via the methylcitrate cycle known from yeast.
Abstract: Escherichia coli grew in a minimal medium on propionate as the sole carbon and energy source. Initially a lag phase of 4–7 days was observed. Cells adapted to propionate still required 1–2 days before growth commenced. Incorporation of (2-13C), (3-13C) or (2H3)propionate into alanine revealed by NMR that propionate was oxidized to pyruvate without randomisation of the carbon skeleton and excluded pathways in which the methyl group was transiently converted to a methylene group. Extracts of propionate-grown cells contained a specific enzyme that catalyses the condensation of propionyl-CoA with oxaloacetate, most probably to methylcitrate. The enzyme was purified and identified as the already-known citrate synthase II. By 2-D gel electrophoresis, the formation of a second propionate-specific enzyme with sequence similarities to isocitrate lyases was detected. The genes of both enzymes were located in a putative operon with high identities (at least 76% on the protein level) with the very recently discovered prp operon from Salmonella typhimurium. The results indicate that E. coli oxidises propionate to pyruvate via the methylcitrate cycle known from yeast. The 13C patterns of aspartate and glutamate are consistent with the further oxidation of pyruvate to acetyl-CoA. Oxaloacetate is predominantly generated via the glyoxylate cycle rather than by carboxylation of phosphoenolpyruvate.