Showing papers on "Energy source published in 2021"

Photocatalytic solar hydrogen production from water on a 100-m2 scale.

Abstract: The unprecedented impact of human activity on Earth’s climate and the ongoing increase in global energy demand have made the development of carbon-neutral energy sources ever more important. Hydrogen is an attractive and versatile energy carrier (and important and widely used chemical) obtainable from water through photocatalysis using sunlight, and through electrolysis driven by solar or wind energy1,2. The most efficient solar hydrogen production schemes, which couple solar cells to electrolysis systems, reach solar-to-hydrogen (STH) energy conversion efficiencies of 30% at a laboratory scale3. Photocatalytic water splitting reaches notably lower conversion efficiencies of only around 1%, but the system design is much simpler and cheaper and more amenable to scale-up1,2—provided the moist, stoichiometric hydrogen and oxygen product mixture can be handled safely in a field environment and the hydrogen recovered. Extending our earlier demonstration of a 1-m2 panel reactor system based on a modified, aluminium-doped strontium titanate particulate photocatalyst4, we here report safe operation of a 100-m2 array of panel reactors over several months with autonomous recovery of hydrogen from the moist gas product mixture using a commercial polyimide membrane5. The system, optimized for safety and durability, and remaining undamaged on intentional ignition of recovered hydrogen, reaches a maximum STH of 0.76%. While the hydrogen production is inefficient and energy negative overall, our findings demonstrate that safe, large-scale photocatalytic water splitting, and gas collection and separation are possible. To make the technology economically viable and practically useful, essential next steps are reactor and process optimization to substantially reduce costs and improve STH efficiency, photocatalyst stability and gas separation efficiency. Carbon-neutral hydrogen can be produced through photocatalytic water splitting, as demonstrated here with a 100-m2 array of panel reactors that reaches a maximum conversion efficiency of 0.76%.

Fundamentals and applications of photo-thermal catalysis.

Abstract: Photo-thermal catalysis has recently emerged as an alternative route to drive chemical reactions using light as an energy source. Through the synergistic combination of photo- and thermo-chemical contributions of sunlight, photo-thermal catalysis has the potential to enhance reaction rates and to change selectivity patterns, even under moderate operation conditions. This review provides the fundamentals of localized surface plasmon resonance (LSPR) that explain the photo-thermal effect in plasmonic structures, describes the different mechanistic pathways underlying photo-thermal catalysis, suggests methodologies to disentangle the reaction mechanisms and proposes material design strategies to improve photo-thermal performance. Ultimately, the goal is to pave the way for the wide implementation of this promising technology in the production of synthetic fuels and chemicals.

A review of strategies for building energy management system: Model predictive control, demand side management, optimization, and fault detect & diagnosis

Abstract: Building energy use is expected to grow by more than 40% in the next 20 years. Electricity remains the largest energy source consumed by buildings, and that demand is growing. To mitigate the impact of the growing demand, strategies are needed to improve buildings' energy efficiency. In residential buildings home appliances, water, and space heating are answerable for the increase of energy use, while space heating and other miscellaneous equipment are behind the increase of energy utilization in non-residential buildings. Building energy management systems support building managers and proprietors to increase energy efficiency in modern and existing buildings, non-residential and residential buildings can benefit from building energy management system to decrease energy use. Base on the type of building, different management strategies can be used to achieve energy savings. This paper presents a review of management strategies for building energy management systems for improving energy efficiency. Different management strategies are investigated in non-residential and residential buildings. Following this, the reviewed researches are discussed in terms of the type of buildings, building systems, and management strategies. Lastly, the paper discusses future challenges for the increase of energy efficiency in building energy management system.

Electrocatalytic Refinery for Sustainable Production of Fuels and Chemicals

Abstract: Compared to modern fossil-fuel-based refineries, the emerging electrocatalytic refinery (e-refinery) is a more sustainable and environmentally benign strategy to convert renewable feedstocks and energy sources into transportable fuels and value-added chemicals. A crucial step in conducting e-refinery processes is the development of appropriate reactions and optimal electrocatalysts for efficient cleavage and formation of chemical bonds. However, compared to well-studied primary reactions (e.g., O2 reduction, water splitting), the mechanistic aspects and materials design for emerging complex reactions are yet to be settled. To address this challenge, herein, we first present fundamentals of heterogeneous electrocatalysis and some primary reactions, and then implement these to establish the framework of e-refinery by coupling in situ generated intermediates (integrated reactions) or products (tandem reactions). We also present a set of materials design principles and strategies to efficiently manipulate the reaction intermediates and pathways.

Battery energy-storage system: A review of technologies, optimization objectives, constraints, approaches, and outstanding issues

Abstract: Due to urbanization and the rapid growth of population, carbon emission is increasing, which leads to climate change and global warming. With an increased level of fossil fuel burning and scarcity of fossil fuel, the power industry is moving to alternative energy resources such as photovoltaic power (PV), wind power (WP), and battery energy-storage systems (BESS), among others. BESS has some advantages over conventional energy sources, which include fast and steady response, adaptability, controllability, environmental friendliness, and geographical independence, and it is considered as a potential solution to the global warming problem. This paper provides a comprehensive review of the battery energy-storage system concerning optimal sizing objectives, the system constraint, various optimization models, and approaches along with their advantages and weakness. Furthermore, for better understanding, the optimization objectives and methods have been classified into different categories. This paper also provides a detailed discussion on the BESS applications and explores the shortages of existing optimal BESS sizing algorithms to identify the gaps for future research. The issues and challenges are also highlighted to provide a clear idea to the researchers in the field of BESS. Overall, this paper conveys some significant recommendations that would be useful to the researchers and policymakers to structure a productive, powerful, efficient, and robust battery energy-storage system toward a future with a sustainable environment.

Life-cycle assessment of an industrial direct air capture process based on temperature–vacuum swing adsorption

Abstract: Current climate targets require negative carbon dioxide (CO2) emissions. Direct air capture is a promising negative emission technology, but energy and material demands lead to trade-offs with indirect emissions and other environmental impacts. Here, we show by life-cycle assessment that the commercial direct air capture plants in Hinwil and Hellisheiði operated by Climeworks can already achieve negative emissions today, with carbon capture efficiencies of 85.4% and 93.1%. The climate benefits of direct air capture, however, depend strongly on the energy source. When using low-carbon energy, as in Hellisheiði, adsorbent choice and plant construction become more important, inducing up to 45 and 15 gCO2e per kilogram CO2 captured, respectively. Large-scale deployment of direct air capture for 1% of the global annual CO2 emissions would not be limited by material and energy availability. However, the current small-scale production of amines for the adsorbent would need to be scaled up by more than an order of magnitude. Other environmental impacts would increase by less than 0.057% when using wind power and by up to 0.30% for the global electricity mix forecasted for 2050. Energy source and efficiency are essential for direct air capture to enable both negative emissions and low-carbon fuels. Direct air capture (DAC) of CO2 has garnered interest as a negative emissions technology to help achieve climate targets, but indirect emissions and other environmental impacts must be better understood. Here, Deutz and Bardow perform a life-cycle assessment of DAC plants operated by Climeworks, based on industrial data.

Conversion of biomass to biofuels and life cycle assessment: a review

Abstract: The global energy demand is projected to rise by almost 28% by 2040 compared to current levels. Biomass is a promising energy source for producing either solid or liquid fuels. Biofuels are alternatives to fossil fuels to reduce anthropogenic greenhouse gas emissions. Nonetheless, policy decisions for biofuels should be based on evidence that biofuels are produced in a sustainable manner. To this end, life cycle assessment (LCA) provides information on environmental impacts associated with biofuel production chains. Here, we review advances in biomass conversion to biofuels and their environmental impact by life cycle assessment. Processes are gasification, combustion, pyrolysis, enzymatic hydrolysis routes and fermentation. Thermochemical processes are classified into low temperature, below 300 °C, and high temperature, higher than 300 °C, i.e. gasification, combustion and pyrolysis. Pyrolysis is promising because it operates at a relatively lower temperature of up to 500 °C, compared to gasification, which operates at 800–1300 °C. We focus on 1) the drawbacks and advantages of the thermochemical and biochemical conversion routes of biomass into various fuels and the possibility of integrating these routes for better process efficiency; 2) methodological approaches and key findings from 40 LCA studies on biomass to biofuel conversion pathways published from 2019 to 2021; and 3) bibliometric trends and knowledge gaps in biomass conversion into biofuels using thermochemical and biochemical routes. The integration of hydrothermal and biochemical routes is promising for the circular economy.

A molecular photosensitizer achieves a V oc of 1.24 V enabling highly efficient and stable dye-sensitized solar cells with copper(II/I)-based electrolyte

Abstract: To develop photosensitizers with high open-circuit photovoltage (Voc) is a crucial strategy to enhance the power conversion efficiency (PCE) of co-sensitized solar cells. Here, we show a judiciously tailored organic photosensitizer, coded MS5, featuring the bulky donor N-(2’,4’-bis(dodecyloxy)-[1,1’-biphenyl]-4-yl)-2’,4’-bis(dodecyloxy)-N-phenyl-[1,1’-biphenyl]-4-amine and the electron acceptor 4-(benzo[c][1,2,5]thiadiazol-4-yl)benzoic acid. Employing MS5 with a copper (II/I) electrolyte enables a dye-sensitized solar cell (DSC) to achieve a strikingly high Voc of 1.24 V, with the Voc deficit as low as 130 mV and an ideality factor of merely 1.08. The co-sensitization of MS5 with the wider spectral-response dye XY1b produces a highly efficient and stable DSC with the PCE of 13.5% under standard AM1.5 G, 100 mW cm−2 solar radiation. Remarkably, the co-sensitized solar cell (active area of 2.8 cm2) presents a record PCE of 34.5% under ambient light, rendering it very attractive as an ambient light harvesting energy source for low power electronics. Designing photo-sensitisers with high open-circuit voltage (Voc) is desirable to enhance the power conversion efficiency (PCE) of co-sensitized solar cells. Here, the authors employ a judiciously tailored organic sensitiser MS5 with copper electrolyte to achieve a Voc of 1.24 V, and recorded PCE of 34.5% under ambient light.

Arbuscular mycorrhizal fungi enhance mineralisation of organic phosphorus by carrying bacteria along their extraradical hyphae.

Abstract: Arbuscular mycorrhizal (AM) fungi gain access to nutrient patches outside the rhizosphere by producing an extensive network of fine hyphae. Here, we focused on establishing the mechanism by which AM fungal hyphae reach discrete organic patches with a cohort of functional bacteria transported in a biofilm on their surface. We investigated the mechanisms and impact of the translocation of phosphate solubilising bacteria (PSB) along AM fungal hyphae in bespoke microcosms. An in vitro culture experiment was also conducted to determine the direct impact of hyphal exudates of AM fungi upon the growth of PSB. The extraradical hyphae of AM fungi can transport PSB to organic phosphorus (P) patches and enhance organic P mineralisation both under in vitro culture and soil conditions. Bacteria move in a thick water film formed around fungal hyphae. However, the bacteria cannot be transferred to the organic P patch without an energy source in the form of hyphal exudates. Our results could be harnessed to better manage plant-microbe interactions and improve the ability of biological inocula involving AM fungi and bacteria to enhance the sustainability of agricultural crops in P limited conditions.

Source sector and fuel contributions to ambient PM 2.5 and attributable mortality across multiple spatial scales

Abstract: Ambient fine particulate matter (PM2.5) is the world’s leading environmental health risk factor. Reducing the PM2.5 disease burden requires specific strategies that target dominant sources across multiple spatial scales. We provide a contemporary and comprehensive evaluation of sector- and fuel-specific contributions to this disease burden across 21 regions, 204 countries, and 200 sub-national areas by integrating 24 global atmospheric chemistry-transport model sensitivity simulations, high-resolution satellite-derived PM2.5 exposure estimates, and disease-specific concentration response relationships. Globally, 1.05 (95% Confidence Interval: 0.74–1.36) million deaths were avoidable in 2017 by eliminating fossil-fuel combustion (27.3% of the total PM2.5 burden), with coal contributing to over half. Other dominant global sources included residential (0.74 [0.52–0.95] million deaths; 19.2%), industrial (0.45 [0.32–0.58] million deaths; 11.7%), and energy (0.39 [0.28–0.51] million deaths; 10.2%) sectors. Our results show that regions with large anthropogenic contributions generally had the highest attributable deaths, suggesting substantial health benefits from replacing traditional energy sources. Ambient fine particulate matter (PM2.5) is one of the most important environmental health risk factors in many regions. Here, the authors present an assessment of PM2.5 emission sources and the related health impacts across global to sub-national scales and find that over 1 million deaths were avoidable in 2017 by eliminating PM2.5 mass associated with fossil fuel combustion emissions.

The anaerobic threshold: 50+ years of controversy.

Abstract: The anaerobic threshold (AT) remains a widely recognized, and contentious, concept in exercise physiology and medicine. As conceived by Karlman Wasserman, the AT coalesced the increase of blood lactate concentration ([La- ]), during a progressive exercise test, with an excess pulmonary carbon dioxide output ( V C O 2 ). Its principal tenets were: limiting oxygen (O2 ) delivery to exercising muscle→increased glycolysis, La- and H+ production→decreased muscle and blood pH→with increased H+ buffered by blood [HCO3 - ]→increased CO2 release from blood→increased V C O 2 and pulmonary ventilation. This schema stimulated scientific scrutiny which challenged the fundamental premise that muscle anoxia was requisite for increased muscle and blood [La- ]. It is now recognized that insufficient O2 is not the primary basis for lactataemia. Increased production and utilization of La- represent the response to increased glycolytic flux elicited by increasing work rate, and determine the oxygen uptake ( V O 2 ) at which La- accumulates in the arterial blood (the lactate threshold; LT). However, the threshold for a sustained non-oxidative contribution to exercise energetics is the critical power, which occurs at a metabolic rate often far above the LT and separates heavy from very heavy/severe-intensity exercise. Lactate is now appreciated as a crucial energy source, major gluconeogenic precursor and signalling molecule but there is no ipso facto evidence for muscle dysoxia or anoxia. Non-invasive estimation of LT using the gas exchange threshold (non-linear increase of V C O 2 versus V O 2 ) remains important in exercise training and in the clinic, but its conceptual basis should now be understood in light of lactate shuttle biology.

Bilayer of polyelectrolyte films for spontaneous power generation in air up to an integrated 1,000 V output.

Abstract: Environmentally adaptive power generation is attractive for the development of next-generation energy sources. Here we develop a heterogeneous moisture-enabled electric generator (HMEG) based on a bilayer of polyelectrolyte films. Through the spontaneous adsorption of water molecules in air and induced diffusion of oppositely charged ions, one single HMEG unit can produce a high voltage of ~0.95 V at low (25%) relative humidity (RH), and even jump to 1.38 V at 85% RH. A sequentially aligned stacking strategy is created for large-scale integration of HMEG units, to offer a voltage of more than 1,000 V under ambient conditions (25% RH, 25 °C). Using origami assembly, a small section of folded HMEGs renders an output of up to 43 V cm−3. Such integration devices supply sufficient power to illuminate a lamp bulb of 10 W, to drive a dynamic electronic ink screen and to control the gate voltage for a self-powered field effect transistor. A power generator exhibits enhanced output due to a dual-charge-carrier design. The voltage produced is constant yet competitive even under low relative humidity.

Atomically Dispersed Reactive Centers for Electrocatalytic CO2 Reduction and Water Splitting.

Abstract: Developing electrocatalytic energy conversion technologies for replacing the traditional energy source is highly expected to resolve the fossil fuel exhaustion and related environmental problems. Exploring stable and high-efficiency electrocatalysts is of vital importance for the promotion of these technologies. Single-atom catalysts (SACs), with atomically distributed active sites on supports, perform as emerging materials in catalysis and present promising prospects for a wide range of applications. The rationally designed near-range coordination environment, long-range electronic interaction and microenvironment of the coordination sphere cast huge influence on the reaction mechanism and related catalytic performance of SACs. In the current Review, some recent developments of atomically dispersed reactive centers for electrocatalytic CO2 reduction and water splitting are well summarized. The catalytic mechanism and the underlying structure-activity relationship are elaborated based on the recent progresses of various operando investigations. Finally, by highlighting the challenges and prospects for the development of single-atom catalysis, we hope to shed some light on the future research of SACs for the electrocatalytic energy conversion.