scispace - formally typeset
Search or ask a question
Topic

Field effect

About: Field effect is a research topic. Over the lifetime, 4018 publications have been published within this topic receiving 92613 citations.


Papers
More filters
Journal ArticleDOI
11 Jan 2016-ACS Nano
TL;DR: It is found that few-layer AA-stacking HfS2-FETs display excellent field effect responses (Ion/Ioff ≈ 10(7) with reduced hysteresis compared to the FETs prepared under ambient conditions, and the stability of the device in air is significantly improved by passivating Fets with BN in a vacuum cluster.
Abstract: Atomically smooth van der Waals materials are structurally stable in a monolayer and a few layers but are susceptible to oxygen-rich environments. In particular, recently emerging materials such as black phosphorus and perovskite have revealed stronger environmental sensitivity than other two-dimensional layered materials, often obscuring the interesting intrinsic electronic and optical properties. Unleashing the true potential of these materials requires oxidation-free sample preparation that protects thin flakes from air exposure. Here, we fabricated few-layer hafnium disulfide (HfS2) field effect transistors (FETs) using an integrated vacuum cluster system and study their electronic properties and stability under ambient conditions. By performing all the device fabrication and characterization procedure under an oxygen- and moisture-free environment, we found that few-layer AA-stacking HfS2-FETs display excellent field effect responses (Ion/Ioff ≈ 107) with reduced hysteresis compared to the FETs prepa...

99 citations

Journal ArticleDOI
TL;DR: In this article, the ferroelectric field effect was observed in the conducting oxide SrRuO3 using Pb(Zr0.52Ti0.48)O3/SrRuO 3 epitaxial heterostructures.
Abstract: We report the observation of a ferroelectric field effect in the conducting oxide SrRuO3 using Pb(Zr0.52Ti0.48)O3/SrRuO3 epitaxial heterostructures. Upon reversing the polarization of the ferroelectric Pb(Zr0.52Ti0.48)O3 layer, we measured a 9% change in the resistance of a nominally 30 A SrRuO3 film at room temperature. This change was nonvolatile for a period of several days. Conductivity measurements taken between 4.2 and 300 K are consistent with n-type conduction throughout this temperature range. Hall effect measurements also yield n-type conduction, with n≈2×1022 electrons/cm3, and furthermore allow us to understand quantitatively the magnitude of the observed resistivity change.

98 citations

Journal ArticleDOI
TL;DR: In this paper, a simple device and a method for pH monitoring, using an organic thin-film transistor as transducer, was proposed, based on the field-enhanced conductivity of the poly(3-hexylthiophene) semiconducting polymer.
Abstract: In this paper we propose a simple device and a method for pH monitoring, using an organic thin-film transistor as transducer. Such organic transducers may show potential advantages for sensor technology in terms of fabrication cost and biocompatibility. To explore the applicability of organic transistors in the area of bioanalytics, we have realized a proton sensitive organic transistor and an analogue interface that takes into account the particularities of the transistor in order to illustrate the pH response. The detection principle is based on the field-enhanced conductivity of the poly(3-hexylthiophene) semiconducting polymer. The device was characterized electrically in different pH buffers. To display directly the pH response, the detector was connected to a specially developed low-noise, low-power amplifier system. The device concept, electrical characteristics, pH sensitivity and stability are discussed.

98 citations

Posted Content
TL;DR: In this paper, the authors reported that controlled heating in air significantly improves device performance of WSe2 FETs in terms of on-state currents and field effect mobilities, and they further demonstrated that by combining air heating method developed in this work with supporting 2D materials on BN substrate, they achieved a noteworthy field effect mobility of 83 cm2/Vs for monolayer WSe 2 FET.
Abstract: Monolayer WSe2 is a two dimensional (2D) semiconductor with a direct bandgap, and it has been recently explored as a promising material for electronics and optoelectronics. Low field effect mobility is the main constraint preventing WSe2 from becoming one of the competing channel materials for field-effect transistors (FETs). Recent results have demonstrated that chemical treatments can modify the electrical properties of transition metal dichalcogenides (TMDCs) including MoS2 and WSe2. Here, we report that controlled heating in air significantly improves device performance of WSe2 FETs in terms of on-state currents and field-effect mobilities. Specifically, after heating at optimized conditions, chemical vapor deposition grown monolayer WSe2 FETs showed an average FET mobility of 31 cm2/Vs and on/off current ratios up to 5*108. For few-layer WSe2 FETs, after the same treatment applied, we achieved a high mobility up to 92 cm2/Vs. These values are significantly higher than FETs fabricated using as-grown WSe2 flakes without heating treatment, demonstrating the effectiveness of air heating on the performance improvements of WSe2 FETs. The underlying chemical processes involved during air heating and the formation of in-plane heterojunctions of WSe2 and WO3-x, which is believed to be the reason for the improved FET performance, were studied by spectroscopy and transmission electron microscopy. We further demonstrated that by combining air heating method developed in this work with supporting 2D materials on BN substrate, we achieved a noteworthy field effect mobility of 83 cm2/Vs for monolayer WSe2 FETs. This work is a step towards controlled modification of the properties of WSe2 and potentially other TMDCs, and may greatly improve device performance for future applications of 2D materials in electronics and optoelectronics.

98 citations

Journal ArticleDOI
21 Sep 2016-ACS Nano
TL;DR: It is shown here that solution-processed plasmonic semiconductor nanocrystals exhibit superbroadband (over 400 THz) SA, meanwhile with large modulation depth and ultrafast recovery with facile accessibility and superbroad band optical nonlinearity, which may stimulate a growing interest in the exploiting of relevant NLO and photonic applications.
Abstract: Field effect relies on the nonlinear current–voltage relation in semiconductors; analogously, materials that respond nonlinearly to an optical field can be utilized for optical modulation. For instance, nonlinear optical (NLO) materials bearing a saturable absorption (SA) feature an on–off switching behavior at the critical pumping power, thus enabling ultrafast laser pulse generation with high peak power. SA has been observed in diverse materials preferably in its nanoscale form, including both gaped semiconductor nanostructures and gapless materials like graphene; while the presence of optical bandgap and small carrier density have limited the active spectral range and intensity. We show here that solution-processed plasmonic semiconductor nanocrystals exhibit superbroadband (over 400 THz) SA, meanwhile with large modulation depth (∼7 dB) and ultrafast recovery (∼315 fs). Optical modulators fabricated using these plasmonic nanocrystals enable mode-locking and Q-switching operation across the near-infrar...

98 citations


Network Information
Related Topics (5)
Thin film
275.5K papers, 4.5M citations
94% related
Band gap
86.8K papers, 2.2M citations
94% related
Silicon
196K papers, 3M citations
94% related
Amorphous solid
117K papers, 2.2M citations
90% related
Dielectric
169.7K papers, 2.7M citations
90% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
20235
202210
202171
202078
2019103
2018133