Topic
Filler metal
About: Filler metal is a research topic. Over the lifetime, 11152 publications have been published within this topic receiving 86590 citations.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, the effect of different temperatures of post weld heat treatments on the residual stress and mechanical properties were investigated for dissimilar joint of ASTM A537CL1 pressure vessel steel to AISI A321 austenitic stainless steel.
32 citations
••
TL;DR: In this paper, induction-assisted laser welding was performed with filler metal additions to weld IN-738, a nickel-base superalloy, and the results demonstrated that the quality and performance of the laser-welded IN738 specimens were acceptable, but more works on the process optimization are required to further improve the weld quality.
32 citations
•
01 Jan 2006
TL;DR: An introduction to welding Advanced process development trends Welding power source technology Filler materials for arc welding Gases for advanced welding processes Advanced gas tungsten arc welding (GTAW) Gas metal arc welding(GMAW) High energy density processes Narrow gap welding techniques Monitoring and control of welding processes Welding automation and robotics.
Abstract: An introduction to welding Advanced process development trends Welding power source technology Filler materials for arc welding Gases for advanced welding processes Advanced gas tungsten arc welding (GTAW) Gas metal arc welding (GMAW) High energy density processes Narrow-gap welding techniques Monitoring and control of welding processes Welding automation and robotics.
32 citations
•
19 Jun 1986TL;DR: In this article, an improved implement comprising a cemented carbide supported composite abrasive compact which is brazed to a concrete substrate with a brazing filler metal having a liquidus substantially above 700°C was described.
Abstract: Disclosed is an improved implement comprising a cemented carbide supported composite abrasive compact which is brazed to a cemented carbide substrate with a brazing filler metal having a liquidus substantially above 700° C. The composite compact preferably is a composite polycrystalline diamond compact. The brazing filler metal is a brazing alloy which has the following composition, by weight: Pd: 20-80% Cr: 2-13% B: 1-4% Ni: balance.
32 citations
••
TL;DR: In this paper, a novel approach to welding crack sensitive 2024 aluminium alloy was made by using fiber laser, and the weld quality was assessed in terms weld-seam geometry, root to width ratio, surface appearance, penetration depth, microstructure and defects.
32 citations