scispace - formally typeset
Search or ask a question
Topic

Flexural strength

About: Flexural strength is a research topic. Over the lifetime, 52123 publications have been published within this topic receiving 846504 citations. The topic is also known as: bending strength & modulus of rupture.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, two fiber forms, a 140 μm diameter monofilament and a 10μm diameter filamentary yarn, were incorporated into a matrix of borosilicate glass.
Abstract: Silicon carbide fibre-reinforced glass-matrix composites have been fabricated and tested. Two fibre forms, a 140 μm diameter monofilament and a 10 μm diameter filamentary yarn, were incorporated into a matrix of borosilicate glass. The hot-pressing fabrication procedure resulted in fully dense unidirectionally reinforced specimens with excellent flexural strength and fracture toughness over the temperature range 22 to 700° C. In addition, composite thermal expansion was found to be nearly independent of fibre orientation indicating that multiaxially reinforced composites should be readily fabricable without the occurrence of extensive cracking.

302 citations

Journal ArticleDOI
TL;DR: In this paper, commercial corundum powder and a liquid-shaping approach are used for manufacturing complex hollow components and large flat windows of sintered and hot isostatically pressed Al2O3 ceramics having grain sizes of 0.4-0.6 μm at relative densities of >99.9%.
Abstract: Commercial corundum powder and a liquid-shaping approach are used for manufacturing complex hollow components and large flat windows of sintered and hot isostatically pressed Al2O3 ceramics having grain sizes of 0.4–0.6 μm at relative densities of >99.9%. High macrohardness (HV10 = 20–21 GPa) and four-point bending strength (600–700 MPa; 750–900 MPa in three-point bending) are associated with a real in-line transmission of 55%–65% through polished plates. The submicrometer microstructure and the optical properties can be retained for use at >1100°C using dopants that shift the sintering temperature to high values without additional grain growth.

302 citations

Journal ArticleDOI
TL;DR: In this article, the effect of waste marble dust (MD) usage as filler material on capillarity properties of self-compact concrete (SCC) is investigated. And the results showed that the workability of fresh SCC has not been affected up to 200 kg/m3 MD content.

301 citations

Journal ArticleDOI
TL;DR: In this article, a component-based joint model was proposed and incorporated into macromodel-based finite element analysis in which beams were modeled with fiber elements to simulate the structural responses of the specimens with severe geometric and material nonlinearity.

300 citations

Journal ArticleDOI
TL;DR: In this article, the results of an experimental investigation to comparatively study the depth of chloride penetration, resistance to acid attack and macrocell corrosion of rubberized concrete and control mix concrete were presented.

300 citations


Network Information
Related Topics (5)
Ultimate tensile strength
129.2K papers, 2.1M citations
92% related
Ceramic
155.2K papers, 1.6M citations
84% related
Microstructure
148.6K papers, 2.2M citations
84% related
Scanning electron microscope
74.7K papers, 1.3M citations
82% related
Finite element method
178.6K papers, 3M citations
82% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
20243
20233,785
20226,968
20213,940
20203,386
20193,138