scispace - formally typeset
Search or ask a question
Topic

Formate

About: Formate is a research topic. Over the lifetime, 8348 publications have been published within this topic receiving 228287 citations. The topic is also known as: formates & methanoate.


Papers
More filters
Journal ArticleDOI
05 Apr 2021-Nature
TL;DR: In this paper, the pseudo-halide anion formate (HCOO−) was used to suppress anion-vacancy defects that are present at grain boundaries and at the surface of the perovskite films.
Abstract: Metal halide perovskites of the general formula ABX3—where A is a monovalent cation such as caesium, methylammonium or formamidinium; B is divalent lead, tin or germanium; and X is a halide anion—have shown great potential as light harvesters for thin-film photovoltaics1–5. Among a large number of compositions investigated, the cubic α-phase of formamidinium lead triiodide (FAPbI3) has emerged as the most promising semiconductor for highly efficient and stable perovskite solar cells6–9, and maximizing the performance of this material in such devices is of vital importance for the perovskite research community. Here we introduce an anion engineering concept that uses the pseudo-halide anion formate (HCOO−) to suppress anion-vacancy defects that are present at grain boundaries and at the surface of the perovskite films and to augment the crystallinity of the films. The resulting solar cell devices attain a power conversion efficiency of 25.6 per cent (certified 25.2 per cent), have long-term operational stability (450 hours) and show intense electroluminescence with external quantum efficiencies of more than 10 per cent. Our findings provide a direct route to eliminate the most abundant and deleterious lattice defects present in metal halide perovskites, providing a facile access to solution-processable films with improved optoelectronic performance. Incorporation of the pseudo-halide anion formate during the fabrication of α-FAPbI3 perovskite films eliminates deleterious iodide vacancies, yielding solar cell devices with a certified power conversion efficiency of 25.21 per cent and long-term operational stability.

1,616 citations

Journal ArticleDOI
07 Jan 2016-Nature
TL;DR: In this paper, the role of the two different catalytic sites of pure cobalt and coexisting domains of cobalt metal and cobalt oxide has been evaluated, showing that surface cobalt atoms of the atomically thin layers have higher intrinsic activity and selectivity towards formate production, at lower overpotentials.
Abstract: Electroreduction of CO2 into useful fuels, especially if driven by renewable energy, represents a potentially 'clean' strategy for replacing fossil feedstocks and dealing with increasing CO2 emissions and their adverse effects on climate. The critical bottleneck lies in activating CO2 into the CO2(•-) radical anion or other intermediates that can be converted further, as the activation usually requires impractically high overpotentials. Recently, electrocatalysts based on oxide-derived metal nanostructures have been shown to enable CO2 reduction at low overpotentials. However, it remains unclear how the electrocatalytic activity of these metals is influenced by their native oxides, mainly because microstructural features such as interfaces and defects influence CO2 reduction activity yet are difficult to control. To evaluate the role of the two different catalytic sites, here we fabricate two kinds of four-atom-thick layers: pure cobalt metal, and co-existing domains of cobalt metal and cobalt oxide. Cobalt mainly produces formate (HCOO(-)) during CO2 electroreduction; we find that surface cobalt atoms of the atomically thin layers have higher intrinsic activity and selectivity towards formate production, at lower overpotentials, than do surface cobalt atoms on bulk samples. Partial oxidation of the atomic layers further increases their intrinsic activity, allowing us to realize stable current densities of about 10 milliamperes per square centimetre over 40 hours, with approximately 90 per cent formate selectivity at an overpotential of only 0.24 volts, which outperforms previously reported metal or metal oxide electrodes evaluated under comparable conditions. The correct morphology and oxidation state can thus transform a material from one considered nearly non-catalytic for the CO2 electroreduction reaction into an active catalyst. These findings point to new opportunities for manipulating and improving the CO2 electroreduction properties of metal systems, especially once the influence of both the atomic-scale structure and the presence of oxide are mechanistically better understood.

1,407 citations

Journal ArticleDOI
TL;DR: Let your light shine: the photocatalytic reduction of carbon dioxide to the formate anion under visible light irradiation is for the first time realized over a photoactive Ti-containing metal-organic framework, NH(2)-MIL-125(Ti), which is fabricated by a facile substitution of ligands in the UV-responsive MIL- 125(Ti) material.
Abstract: Let your light shine: the photocatalytic reduction of carbon dioxide to the formate anion under visible light irradiation is for the first time realized over a photoactive Ti-containing metal-organic framework, NH(2)-MIL-125(Ti), which is fabricated by a facile substitution of ligands in the UV-responsive MIL-125(Ti) material.

1,367 citations

Journal ArticleDOI
TL;DR: The chiral stationary phase for high-performance liquid chromatography showed good chiral recognition ability and high efficiency in both the liquid phase and the solid-state phase.
Abstract: Photoand Electrochemical CO2 Reduction Wan-Hui Wang,*,† Yuichiro Himeda,*,‡,§ James T. Muckerman, Gerald F. Manbeck, and Etsuko Fujita* †School of Petroleum and Chemical Engineering, Dalian University of Technology, Panjin 124221, China ‡National Institute of Advanced Industrial Science and Technology, Tsukuba Central 5-1, 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan JST, ACT-C, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012, Japan Chemistry Department, Brookhaven National Laboratory, Upton, New York 11973-5000, United States

1,133 citations

Journal ArticleDOI
TL;DR: In an attempt to give an order of magnitude regarding CO2 valorization, the most important aspects of CO2 capture and green routes to produce H2 are summarized and economical aspects of the production of methanol and DME are critically assessed.
Abstract: The recent advances in the development of heterogeneous catalysts and processes for the direct hydrogenation of CO2 to formate/formic acid, methanol, and dimethyl ether are thoroughly reviewed, with special emphasis on thermodynamics and catalyst design considerations. After introducing the main motivation for the development of such processes, we first summarize the most important aspects of CO2 capture and green routes to produce H2. Once the scene in terms of feedstocks is introduced, we carefully summarize the state of the art in the development of heterogeneous catalysts for these important hydrogenation reactions. Finally, in an attempt to give an order of magnitude regarding CO2 valorization, we critically assess economical aspects of the production of methanol and DME and outline future research and development directions.

927 citations


Network Information
Related Topics (5)
Aqueous solution
189.5K papers, 3.4M citations
86% related
Adsorption
226.4K papers, 5.9M citations
85% related
Catalysis
400.9K papers, 8.7M citations
84% related
Amino acid
124.9K papers, 4M citations
83% related
Alkyl
223.5K papers, 2M citations
82% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
2023519
2022924
2021423
2020434
2019340
2018338