Topic
Fourier transform infrared spectroscopy
About: Fourier transform infrared spectroscopy is a research topic. Over the lifetime, 48250 publications have been published within this topic receiving 1134369 citations.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this article, a starch-based biodegradable film, with a nano silicon dioxide (nano-SiO2) content, was prepared by the coating method, through which its physical and biodesgradable properties were studied.
241 citations
••
TL;DR: In this article, a new cold plasma jet generator is developed for surface modification of materials at atmospheric pressure, which is composed of two concentric cylindrical all-metal tube electrodes, and the argon is fed into the inner grounded electrode, the outer electrode is connected to the highvoltage power supply and covered with a layer of dielectric, and then a stable cold plasminar jet is formed and blown out into air.
Abstract: A new cold plasma jet has been developed for surface modification of materials at atmospheric pressure. This new cold plasma jet generator is composed of two concentric cylindrical all-metal tube electrodes. The argon is fed into the inner-grounded electrode, the outer electrode is connected to the high-voltage power supply and covered with a layer of dielectric, and then a stable cold plasma jet is formed and blown out into air. The plasma gas temperature is only 25–30 °C. Preliminary results are presented on the modification of polypropylene (PP) and polyethylene terephthalate (PET) fibres by this cold plasma jet. The water contact angle of these materials is found to decrease after plasma treatment and it will recover a little in two months. The chemical changes on the surface of polymers are studied by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Scanning electron microscopy (SEM) is used to study the changes in surface feature of polymers due to plasma treatment. The hydrophilicity and surface structure of these materials after plasma treatment are discussed. The results show that such a plasma jet is effective.
241 citations
••
TL;DR: In this article, a single step combustion process has been used for the synthesis of CuFe2O4 powder from cupric nitrate, ferric nitrates and urea, and detailed physical, electrical and structural characterization of the materials have been carried out for the specimens obtained on sintering at different temperatures up to 1000°C.
241 citations
••
TL;DR: XRD and FTIR data indicated that the biochar/MgAl-LDHs ultra-fine composites can successfully be obtained by liquid-phase deposition and is an effective sorbent for the removal of phosphate from aqueous solutions.
241 citations
••
TL;DR: In this paper, a facile and green synthetic approach for preparing superparamagnetic Fe3O4 nanoparticles using α- d -glucose as reducing agent and gluconic acid (the oxidative product of glucose) as stabilizer and dispersant was demonstrated.
240 citations