Fractography

About: Fractography is a research topic. Over the lifetime, 5043 publications have been published within this topic receiving 86068 citations.

Microstructure Characteristics and Comparative Analysis of Constitutive Models for Flow Stress Prediction of Inconel 718 Alloy

Abstract: An accurate constitutive model is essential for analyzing deformation behavior of material and reliable numerical simulations in metal forming processes. In this study, hot tensile tests of Inconel 718 alloy have been conducted over a wide range of temperatures (300-973 K at an interval of 100 K), strains (0.01-0.3 at an interval of 0.01) and quasi-static strain rates (0.0001, 0.001, 0.01 s−1). Flow stress behavior is significantly affected by test temperatures and strain rates. Microstructure characteristics of deformed test specimens have been examined using scanning electron microscope and electron backscatter diffraction (EBSD). The fractography study revealed that fracture is mix-mode type, i.e., ductile and brittle. Subsequently, EBSD analysis shown that dynamic recrystallization mechanism is more pronounced at a higher temperature. Furthermore, four constitutive models, namely modified Cowper–Symonds, modified Johnson Cook, modified Zerillie-Armstrong and integrated Johnson Cook–Zerillie-Armstrong (JC-ZA) models have been investigated for flow stress prediction. Capability of models has been evaluated based on the correlation coefficient (R), average absolute error (Δ) and its standard deviation (δ). Accurate prediction of flow stress behavior is found by integrated JC-ZA model with R = 0.9873, Δ = 2.44 and δ = 4.08%.

Vat Polymerization-Printed Partially Stabilized Zirconia: Mechanical Properties, Reliability and Structural defects.

Abstract: Additive manufacturing (AM) of ceramics, particularly of zirconia, is becoming of increasing interest due to the substantial freedom available in the design and fabrication process. However, due to the novelty of the field and the challenges associated with printing dense bulk ceramics suitable for structural applications, thorough investigations that explore the effects of printing on the mechanical performance are limited. Previous work has identified anisotropy in the mechanical properties and attributed it to the layer-by-layer deposition. However, substantiated fractographic evidence detailing the origins and effects of layer lines on the probability of failure are limited. This study investigates the mechanical properties of a dense (>99 %TD), partially stabilized zirconia fabricated by a digital light projection printing method following ASTM standards. Hardness and strength evaluations were conducted, followed by a Weibull analysis and fractography. The investigation entailed five unique build directions and a conventionally manufactured reference material that was used as a control. Although the strengths were comparable to the reference material for some orientations, fracture frequently initiated at layer lines and related defects in all orientations. The findings indicate that if the layer lines can be prevented or engineered, the strength of vat printed ceramics can be improved substantially.

Fractography of Modern Engineering Materials: Composites and Metals

Abstract: The fractographic analysis of fracture surfaces in composites and metals is discussed in reviews and reports of recent theoretical and experimental investigations. Topics addressed include fracture-surface micromorphology in engineering solids, SEM fractography of pure and mixed-mode interlaminar fractures in graphite/epoxy composites, determination of crack propagation directions in graphite/epoxy structures, and the fracture surfaces of irradiated composites. Consideration is given to fractographic feature identification and characterization by digital imaging analysis, fractography of pressure-vessel steel weldments, the micromechanisms of major/minor cycle fatigue crack growth in Inconel 718, and fractographic analysis of hydrogen-assisted cracking in alpha-beta Ti alloys.

Dynamic Fracture Responses of Alumina and Two Ceramic Composites

Abstract: A hybrid experimental-numerical procedure was used to characterize the dynamic fracture response of Al2O3 and TiB2-particulate/SiC-matrix and SiC-whisker/Al2O3-matrix composites. Unlike metals and polymers, dynamic arrest stress intensity factors (SIFs) did not exist in the monolithic ceramics and the two ceramic composites considered. Thus a running crack in these materials cannot be arrested by lowering the driving force, i.e., the dynamic SIF. Fractography study of the alumina specimens showed that the area of transgranular failure varied from about 3 percent to about 16 percent for rapid crack extensions in statically and impact loaded specimens, respectively. The influence of kinematic constraints which enforces transgranular flat crack extension, despite the higher fracture energy of transgranular fracture, is discussed.

Interlaboratory study for nickel alloy 625 made by laser powder bed fusion to quantify mechanical property variability.

Abstract: Six different organizations participated in this interlaboratory study to quantify the variability in the tensile properties of Inconel 625 specimens manufactured using laser-powder-bed-fusion additive manufacturing machines The tensile specimens were heat treated and tensile tests conducted until failure The properties measured were yield strength, ultimate tensile strength, elastic modulus, and elongation Statistical analysis revealed that between-participant variability for yield strength, ultimate tensile strength, and elastic modulus values were significantly higher (up to 4 times) than typical within-participant variations Only between-participant and within-participant variability were both similar for elongation A scanning electron microscope was used to examine one tensile specimen for fractography The fracture surface does not have many secondary cracks or other features that would reduce the mechanical properties In fact, the features largely consist of microvoid coalescence and are entirely consistent with ductile failure