Topic
Friction stir processing
About: Friction stir processing is a research topic. Over the lifetime, 2977 publications have been published within this topic receiving 62158 citations.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this article, a comprehensive understanding of the fundamentals of the microstructural evolution during FSW/P has been developed, including the mechanisms underlying the development of grain structures and textures, phases, phase transformations and precipitation.
390 citations
••
25 Jun 2007-Materials Science and Engineering A-structural Materials Properties Microstructure and Processing
TL;DR: In this paper, the formation of FSP zone has been analyzed macroscopically and tensile properties of the joints have been evaluated and correlated with the friction stir processed (FSP) zone formation.
Abstract: AA2219 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength-to-weight ratio. Compared to the many fusion welding processes that are routinely used for joining structural aluminium alloys, friction stir welding (FSW) process is an emerging solid state joining process in which the material that is being welded does not melt and recast. The welding parameters and tool pin profile play a major role in deciding the weld quality. In this investigation an attempt has been made to understand the influences of rotational speed and pin profile of the tool on friction stir processed (FSP) zone formation in AA2219 aluminium alloy. Five different tool pin profiles (straight cylindrical, tapered cylindrical, threaded cylindrical, triangular and square) have been used to fabricate the joints at three different tool rotational speeds. The formation of FSP zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the FSP zone formation. From this investigation it is found that the square tool pin profile produces mechanically sound and metallurgically defect free welds compared to other tool pin profiles.
385 citations
••
TL;DR: In this article, two fine-grained 7075Al alloys with a grain size of 3.8 and 7.5 μm were subjected to friction stir processing (FSP) with different processing parameters.
380 citations
••
TL;DR: Friction stir welding (FSW) is a novel green manufacturing technique due to its energy efficiency and environmental friendliness as discussed by the authors, which involves a rotating tool consisting of a shoulder and/or a probe.
376 citations
••
TL;DR: In this article, a large amount (up to ∼50 vol.%) of nanometer-sized Al 3 Ti particles can be fabricated from Al-Ti elemental powder mixtures via friction stir processing (FSP).
357 citations