scispace - formally typeset
Search or ask a question
Topic

Geographic routing

About: Geographic routing is a research topic. Over the lifetime, 11687 publications have been published within this topic receiving 302224 citations.


Papers
More filters
Proceedings ArticleDOI
25 May 2005
TL;DR: The results show that NADV outperforms current schemes in many aspects: for example, in high noise environments with frequent packet losses, the use of NADV leads to 81% higher delivery ratio and when compared to centralized routing under certain settings, geographic routing using NADV finds paths whose cost is close to the optimum.
Abstract: We propose a new link metric called normalized advance (NADV) for geographic routing in multihop wireless networks. NADV selects neighbors with the optimal trade-off between proximity and link cost. Coupled with the local next hop decision in geographic routing, NADV enables an adaptive and efficient cost-aware routing strategy. Depending on the objective or message priority, applications can use the NADV framework to minimize various types of link cost.We present efficient methods for link cost estimation and perform detailed simulations in diverse scenarios. Our results show that NADV outperforms current schemes in many aspects: for example, in high noise environments with frequent packet losses, the use of NADV leads to 81% higher delivery ratio. When compared to centralized routing under certain settings, geographic routing using NADV finds paths whose cost is close to the optimum.

328 citations

Proceedings ArticleDOI
22 Aug 2005
TL;DR: A metric that estimates the average waiting time for each potential next hop is designed, which provides performance similar to that of schemes that have global knowledge of the network topology, yet without requiring that knowledge.
Abstract: Delay-tolerant networks (DTNs) have the potential to connect devices and areas of the world that are under-served by current networks. A critical challenge for DTNs is determining routes through the network without ever having an end-to-end connection, or even knowing which "routers" will be connected at any given time. Prior approaches have focused either on epidemic message replication or on knowledge of the connectivity schedule. The epidemic approach of replicating messages to all nodes is expensive and does not appear to scale well with increasing load. It can, however, operate without any prior network configuration. The alternatives, by requiring a priori connectivity knowledge, appear infeasible for a self-configuring network.In this paper we present a practical routing protocol that only uses observed information about the network. We designed a metric that estimates how long a message will have to wait before it can be transferred to the next hop. The topology is distributed using a link-state routing protocol, where the link-state packets are "flooded" using epidemic routing. The routing is recomputed when connections are established. Messages are exchanged if the topology suggests that a connected node is "closer" than the current node.We demonstrate through simulation that our protocol provides performance similar to that of schemes that have global knowledge of the network topology, yet without requiring that knowledge. Further, it requires a significantly smaller quantity of buffer, suggesting that our approach will scale with the number of messages in the network, where replication approaches may not.

327 citations

Journal ArticleDOI
01 Apr 2005
TL;DR: Stable, scalable load-sharing across paths, based on end-to-end measurements, can be achieved on the same rapid time- scale as rate control, namely the time-scale of round-trip times.
Abstract: Dynamic multi-path routing has the potential to improve the reliability and performance of a communication network, but carries a risk. Routing needs to respond quickly to achieve the potential benefits, but not so quickly that the network is destabilized. This paper studies how rapidly routing can respond, without compromising stability.We present a sufficient condition for the local stability of end-to-end algorithms for joint routing and rate control. The network model considered allows an arbitrary interconnection of sources and resources, and heterogeneous propagation delays. The sufficient condition we present is decentralized: the responsiveness of each route is restricted by the round-trip time of that route alone, and not by the round-trip times of other routes. Our results suggest that stable, scalable load-sharing across paths, based on end-to-end measurements, can be achieved on the same rapid time-scale as rate control, namely the time-scale of round-trip times.

323 citations

Book ChapterDOI
04 Sep 2006
TL;DR: In this article, the authors presented a new wireless sensor network routing protocol based on the Ant Colony Optimization metaheuristic, which is studied by simulation for several Wireless Sensor Network scenarios and the results clearly show that it minimises communication load and maximises energy savings.
Abstract: Wireless Sensor Networks are characterized by having specific requirements such as limited energy availability, low memory and reduced processing power. On the other hand, these networks have enormous potential applicability, e.g., habitat monitoring, medical care, military surveillance or traffic control. Many protocols have been developed for Wireless Sensor Networks that try to overcome the constraints that characterize this type of networks. Ant-based routing protocols can add a significant contribution to assist in the maximisation of the network lifetime, but this is only possible by means of an adaptable and balanced algorithm that takes into account the Wireless Sensor Networks main restrictions. This paper presents a new Wireless Sensor Network routing protocol, which is based on the Ant Colony Optimization metaheuristic. The protocol was studied by simulation for several Wireless Sensor Network scenarios and the results clearly show that it minimises communication load and maximises energy savings.

323 citations

Patent
21 Oct 2002
TL;DR: In this article, the delivery of requests for emergency service initially handled by an emergency service call center to a public safety answering point is addressed, where caller identification and additional information, such as information regarding the location of the caller and the nature of the emergency, are provided.
Abstract: The present invention is related to the delivery of requests for emergency service initially handled by an emergency service call center to a public safety answering point. The invention additionally allows for enhancement information to be provided to a public safety answering point operator visually in connection with calls routed to that public safety answering point. This information may include caller identification, and additional information, such as information regarding the location of the caller and the nature of the emergency. Furthermore, the routing of requests for emergency service to an appropriate public safety answering point can be accomplished for requests received over a wide geographic area. In particular, requests can be appropriately routed even though they may originate from locations encompassed by different E9-1-1 tandems. The present invention is particularly well suited for use in connection with automatic collision notification and personal alarm monitoring call centers serving areas encompassed by more than one E9-1-1 tandem.

322 citations


Network Information
Related Topics (5)
Wireless ad hoc network
49K papers, 1.1M citations
95% related
Wireless sensor network
142K papers, 2.4M citations
94% related
Network packet
159.7K papers, 2.2M citations
94% related
Wireless network
122.5K papers, 2.1M citations
94% related
Key distribution in wireless sensor networks
59.2K papers, 1.2M citations
93% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
202330
202286
202133
202037
201952
201890