Showing papers on "Heat transfer published in 2014"

Macro- to Microscale Heat Transfer: The Lagging Behavior

Abstract: This work introduces a new concept in heat transfer, developing a transient model describing the fast-transient process of heat transport in solids with micro-structures. In describing the microstructural interaction effect in the short-term response, it extends the "macroscopic" concept that practisings engineers are already familiar with. The dual-phase-leg model covers the existing macroscopic and microscopic models in the same framework, including the classical diffusion model employing the Fourier's law and the thermal wave model for dielectric films, insulators, and semi-conductors, and the photon-electron interaction model for metals (microscopic). Chapters cover the current status of microscale heat transfer, the lagging behaviour in the transient response, experimental evidence supporting the lagging behaviour in heat transport under various circumstances, the high-order effect of phase legs in the delayed response, and the possible effect of lagging responses in the related fields of elasticity and forced convention.

Nanoparticles heat through light localization

Abstract: Aqueous solutions containing light-absorbing nanoparticles have recently been shown to produce steam at high efficiencies upon solar illumination, even when the temperature of the bulk fluid volume remains far below its boiling point. Here we show that this phenomenon is due to a collective effect mediated by multiple light scattering from the dispersed nanoparticles. Randomly positioned nanoparticles that both scatter and absorb light are able to concentrate light energy into mesoscale volumes near the illuminated surface of the liquid. The resulting light absorption creates intense localized heating and efficient vaporization of the surrounding liquid. Light trapping-induced localized heating provides the mechanism for low-temperature light-induced steam generation and is consistent with classical heat transfer.

Augmentation of the Heat Transfer Performance of a Sinusoidal Corrugated Enclosure by Employing Hybrid Nanofluid

Abstract: This paper numerically examines laminar natural convection in a sinusoidal corrugated enclosure with a discrete heat source on the bottom wall, filled by pure water, Al2O3/water nanofluid, and Al2O3-Cu/water hybrid nanofluid which is a new advanced nanofluid with two kinds of nanoparticle materials. The effects of Rayleigh number (103≤Ra≤106) and water, nanofluid, and hybrid nanofluid (in volume concentration of 0% ≤ ϕ ≤ 2%) as the working fluid on temperature fields and heat transfer performance of the enclosure are investigated. The finite volume discretization method is employed to solve the set of governing equations. The results indicate that for all Rayleigh numbers been studied, employing hybrid nanofluid improves the heat transfer rate compared to nanofluid and water, which results in a better cooling performance of the enclosure and lower temperature of the heated surface. The rate of this enhancement is considerably more at higher values of Ra and volume concentrations. Furthermore, by applying ...

High thermal conductivity of chain-oriented amorphous polythiophene

Abstract: Polymers are usually considered thermal insulators, because the amorphous arrangement of the molecular chains reduces the mean free path of heat-conducting phonons. The most common method to increase thermal conductivity is to draw polymeric fibres, which increases chain alignment and crystallinity, but creates a material that currently has limited thermal applications. Here we show that pure polythiophene nanofibres can have a thermal conductivity up to ∼ 4.4 W m(-1) K(-1) (more than 20 times higher than the bulk polymer value) while remaining amorphous. This enhancement results from significant molecular chain orientation along the fibre axis that is obtained during electropolymerization using nanoscale templates. Thermal conductivity data suggest that, unlike in drawn crystalline fibres, in our fibres the dominant phonon-scattering process at room temperature is still related to structural disorder. Using vertically aligned arrays of nanofibres, we demonstrate effective heat transfer at critical contacts in electronic devices operating under high-power conditions at 200 °C over numerous cycles.

Effect of spatially variable magnetic field on ferrofluid flow and heat transfer considering constant heat flux boundary condition

Abstract: Ferrofluid flow and heat transfer in the presence of an external variable magnetic field is studied. The inner cylinder is maintained at uniform heat flux and the outer cylinder has constant temperature. The Control Volume based Finite Element Method (CVFEM) is applied to solve the governing equations. Combined magnetohydrodynamic and ferrohydrodynamic effects have been taken into account. The effects of magnetic number, Hartmann number, Rayleigh number and nanoparticle volume fraction on hydrothermal behavior have been examined. Results show that the Nusselt number is an increasing function of Magnetic number, Rayleigh number and nanoparticle volume fraction while it is a decreasing function of the Hartmann number. Also, it can be concluded that the enhancement in heat transfer decreases with an increase in the Rayleigh number and magnetic number but it increases with an increase in the Hartmann number.

Surface engineering for phase change heat transfer: A review

Abstract: Owing to advances in micro- and nanofabrication methods over the last two decades, the degree of sophistication with which solid surfaces can be engineered today has caused a resurgence of interest in the topic of engineering surfaces for phase change heat transfer. This review aims at bridging the gap between the material sciences and heat transfer communities. It makes the argument that optimum surfaces need to address the specificities of phase change heat transfer in the way that a key matches its lock. This calls for the design and fabrication of adaptive surfaces with multiscale textures and non-uniform wettability. Among numerous challenges to meet the rising global energy demand in a sustainable manner, improving phase change heat transfer has been at the forefront of engineering research for decades. The high heat transfer rates associated with phase change heat transfer are essential to energy and industry applications; but phase change is also inherently associated with poor thermodynamic efficiency at low heat flux, and violent instabilities at high heat flux. Engineers have tried since the 1930s to fabricate solid surfaces that improve phase change heat transfer. The development of micro and nanotechnologies has made feasible the high-resolution control of surface texture and chemistry over length scales ranging from molecular levels to centimeters. This paper reviews the fabrication techniques available for metallic and silicon-based surfaces, considering sintered and polymeric coatings. The influence of such surfaces in multiphase processes of high practical interest, e.g., boiling, condensation, freezing, and the associated physical phenomena are reviewed. The case is made that while engineers are in principle able to manufacture surfaces with optimum nucleation or thermofluid transport characteristics, more theoretical and experimental efforts are needed to guide the design and cost-effective fabrication of surfaces that not only satisfy the existing technological needs, but also catalyze new discoveries.

Enhancing dropwise condensation through bioinspired wettability patterning.

Abstract: Dropwise condensation (DWC) heat transfer depends strongly on the maximum diameter (Dmax) of condensate droplets departing from the condenser surface. This study presents a facile technique implemented to gain control of Dmax in DWC within vapor/air atmospheres. We demonstrate how this approach can enhance the corresponding heat transfer rate by harnessing the capillary forces in the removal of the condensate from the surface. We examine various hydrophilic-superhydrophilic patterns, which, respectively, sustain and combine DWC and filmwise condensation on the substrate. The material system uses laser-patterned masking and chemical etching to achieve the desired wettability contrast and does not employ any hydrophobizing agent. By applying alternating straight parallel strips of hydrophilic (contact angle ∼78°) mirror-finish aluminum and superhydrophilic regions (etched aluminum) on the condensing surface, we show that the average maximum droplet size on the less-wettable domains is nearly 42% of the width of the corresponding strips. An overall improvement in the condensate collection rate, up to 19% (as compared to the control case of DWC on mirror-finish aluminum) was achieved by using an interdigitated superhydrophilic track pattern (on the mirror-finish hydrophilic surface) inspired by the vein network of plant leaves. The bioinspired interdigitated pattern is found to outperform the straight hydrophilic-superhydrophilic pattern design, particularly under higher humidity conditions in the presence of noncondensable gases (NCG), a condition that is more challenging for maintaining sustained DWC.

Heat transfer and material flow during laser assisted multi-layer additive manufacturing

Abstract: A three-dimensional, transient, heat transfer, and fluid flow model is developed for the laser assisted multilayer additive manufacturing process with coaxially fed austenitic stainless steel powder. Heat transfer between the laser beam and the powder particles is considered both during their flight between the nozzle and the growth surface and after they deposit on the surface. The geometry of the build layer obtained from independent experiments is compared with that obtained from the model. The spatial variation of melt geometry, cooling rate, and peak temperatures is examined in various layers. The computed cooling rates and solidification parameters are used to estimate the cell spacings and hardness in various layers of the structure. Good agreement is achieved between the computed geometry, cell spacings, and hardness with the corresponding independent experimental results.