Topic
Heat transfer
About: Heat transfer is a research topic. Over the lifetime, 181795 publications have been published within this topic receiving 2923586 citations. The topic is also known as: heat exchange.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this article, the Zuber hydrodynamic theory is modified to account for the effect of the coating modulation-wavelength on the development of the stable vapor layer above the coated surface, which effectively chokes the liquid down-flow towards the surface (above the coating).
469 citations
••
TL;DR: A detailed literature review of ground-source heat pump (GSHP) systems, and their recent advances is provided in this paper, where the operation principle and energy efficiency of a heat pump are defined.
469 citations
••
TL;DR: In this article, aqueous-based nanofluids containing γ-alumina nanoparticles (primary particle size 10-50 nm) were used to investigate their heat transfer behavior under nucleate pool boiling conditions.
Abstract: This paper is concerned about pool boiling heat transfer using nanofluids, a subject of several investigations over the past few years. The work is motivated by the controversial results reported in the literature and the potential impact of nanofluids on heat transfer intensification. Systematic experiments are carried out to formulate stable aqueous based nanofluids containing γ-alumina nanoparticles (primary particle size 10–50 nm), and to investigate their heat transfer behaviour under nucleate pool boiling conditions. The results show that alumina nanofluids can significantly enhance boiling heat transfer. The enhancement increases with increasing particle concentration and reaches ∼ ∼40% at a particle loading of 1.25% by weight. Discussion of the results suggests that the reported controversies in the thermal performance of nanofluids under the nucleate pool boiling conditions be associated with the properties and behaviour of the nanofluids and boiling surface, as well as their interactions.
468 citations
••
TL;DR: A treatment of the self-heating problem is presented, showing that, in the steady state, some of the heuristic models of heat generation, thermal conductivity, and heat capacity could indeed approximate the correct results within an error bound of 1-10%.
Abstract: A treatment of the self-heating problem is presented. It is based on the laws of phenomenological irreversible thermodynamics (e.g. Onsager's relations and conservation of total energy) and is also consistent with the physical models usually considered in the isothermal drift diffusion approximation. The classical isothermal device equations are extended and completed by a generalized heat-conduction equation involving heat sources and sinks which, besides Joule and Thomson heat, reflect the energy exchanged through recombination (radiative and nonradiative) and optical generation. Thus the extended model also applies to direct semiconductors (e.g., optoelectronic devices) and accounts for effects caused by the ambient light intensity. It fully allows for low temperature since the case of incomplete ionization of donors and acceptors (impurity freeze-out) is properly incorporated in the theory. A critical comparison with previous work is made, showing that, in the steady state, some of the heuristic models of heat generation, thermal conductivity, and heat capacity could indeed approximate the correct results within an error bound of 1-10%. In the transient regime, however, none of the models used previously seems to be reliable, particularly, if short switching times ( >
467 citations