Topic
Indium tin oxide
About: Indium tin oxide is a research topic. Over the lifetime, 17857 publications have been published within this topic receiving 402127 citations. The topic is also known as: indium tin oxide.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, flexible and transparent textile-based conductors are developed by inkjet printing poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) onto polyethylene terephthalate (PET) mesh fabrics.
Abstract: Flexible and transparent textile-based conductors are developed by inkjet printing poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) onto polyethylene terephthalate (PET) mesh fabrics. The conductivity‐transparency relationship is determined for textile-based conductors with different thicknesses of the printed PEDOT:PSS fi lm. The function of these textile-based conductors is studied in the alternating current powder electroluminescent (ACPEL) devices and compared with indium tin oxide (ITO) glass in an ACPEL device of the same confi guration. Textiles coated with conducting polymers are a potential alternative to coated polymer fi lms for fl exible, transparent conductors.
105 citations
TL;DR: In this paper, a transparent Pb(Zr, Ti)O3 (PZT) thin film with over 1 µm thickness was deposited by the aerosol deposition method (ADM).
Abstract: Transparent Pb(Zr, Ti)O3 (PZT) thin films with over 1 µm thickness were deposited by the aerosol deposition method (ADM). The transparency of the PZT thin film deposited at room temperature strongly depended on the kinds of carrier gases and the particle flow velocity. The color of the film became black if He gas was used as a carrier gas, and became transparent using N2, O2 or air gases, which were difficult to electrically discharge during the impacting of particles. The transmittance values in the 0.5–0.8 µm wavelength region of as-deposited 2-µm-thick PZT thin films on indium tin oxide (ITO) substrate were 70–80%. After annealing at 600°C, the remanent polarizations and the coercive fields of PZT thin films were 36 µC/cm2 and 89 kV/cm, respectively. With increasing carrier gas velocity, the remanent polarization decreased and the coercive field increased.
105 citations
TL;DR: In this article, the authors demonstrate electrical tuning of plasmonic mid-infrared absorber resonances at 4'μm wavelength using an array of gold nanostrip antennas separated from a back reflector by a thin dielectric layer.
Abstract: We experimentally demonstrate electrical tuning of plasmonic mid-infrared absorber resonances at 4 μm wavelength. The perfect infrared absorption is realized by an array of gold nanostrip antennas separated from a back reflector by a thin dielectric layer. An indium tin oxide active layer strongly coupled to the optical near field of the plasmonic absorber allows for spectral tunability.
105 citations
TL;DR: This work demonstrated a sensitive, stable and low cytotoxicity approach for early and accurate detection of cancer cells and excellent discrimination against target and analogous cells was demonstrated, indicating the high selectivity of the proposed cell sensor.
104 citations
TL;DR: In this article, a semitransparent, multilayered cathode of indium tin oxide (ITO)/Ag/tungsten oxide (WO3) for transparent organic light-emitting diodes was developed.
Abstract: The authors have developed a semitransparent, multilayered cathode of indium tin oxide (ITO)/Ag/tungsten oxide (WO3) for transparent organic light-emitting diodes. The device showed a weak negative differential resistance (NDR), until the operating voltage of 8V was reached. NDR was due to the resonant tunneling by both the quantum barrier and quantum well. The silver oxide (Ag2O) on the Ag metal was confirmed by x-ray photoelectron spectroscopy, and the energy levels of Ag2O were quantized due to the quantum size effect and this produced the resonant tunneling channels. The device using ITO∕Ag∕WO3 with a LiF∕Al bilayer was superior to those devices which only used ITO or WO3, mainly because the out coupling was enhanced by employing a WO3 material, which is much more transparent than ITO.
104 citations