Indium tin oxide

About: Indium tin oxide is a research topic. Over the lifetime, 17857 publications have been published within this topic receiving 402127 citations. The topic is also known as: indium tin oxide.

Transition metal oxides as the buffer layer for polymer photovoltaic cells

Abstract: Polymer-based photovoltaic cells have been fabricated by inserting a thin, transparent, transition metal oxide layer between the transparent anode (indium tin oxide) and the polymer layer. Two different transition metal oxides, namely vanadium oxide and molybdenum oxide, were used and the device performance was compared. The surface of the oxide films and the interface between the polymer and the oxide was studied with the help of atomic force microscopy. The effect of the thickness of the oxide layer on electrical characteristics of the device was also studied and optimized thickness was achieved to give high power conversion efficiency of 3.3% under simulated AM1.5G illumination of 100mW∕cm2.

Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent Electrodes

Abstract: Highly conductive and transparent poly-(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) films, incorporating a fluorosurfactant as an additive, have been prepared for stretchable and transparent electrodes. The fluorosurfactant-treated PEDOT:PSS films show a 35% improvement in sheet resistance (Rs) compared to untreated films. In addition, the fluorosurfactant renders PEDOT:PSS solutions amenable for deposition on hydrophobic surfaces, including pre-deposited, annealed films of PEDOT:PSS (enabling the deposition of thick, highly conductive, multilayer films) and stretchable poly(dimethylsiloxane) (PDMS) substrates (enabling stretchable electronics). Four-layer PEDOT:PSS films have an Rs of 46 Ω per square with 82% transmittance (at 550 nm). These films, deposited on a pre-strained PDMS substrate and buckled, are shown to be reversibly stretchable, with no change to Rs, during the course of over 5000 cycles of 0 to 10% strain. Using the multilayer PEDOT:PSS films as anodes, indium tin oxide (ITO)-free organic photovoltaics are prepared and shown to have power conversion efficiencies comparable to that of devices with ITO as the anode. These results show that these highly conductive PEDOT:PSS films can not only be used as transparent electrodes in novel devices (where ITO cannot be used), such as stretchable OPVs, but also have the potential to replace ITO in conventional devices.

Low-temperature solution processing of graphene-carbon nanotube hybrid materials for high-performance transparent conductors.

Abstract: We report the formation of a nanocomposite comprised of chemically converted graphene and carbon nanotubes. Our solution-based method does not require surfactants, thus preserving the intrinsic electronic and mechanical properties of both components, delivering 240 ohms/square at 86% transmittance. This low-temperature process is completely compatible with flexible substrates and does not require a sophisticated transfer process. We believe that this technology is inexpensive, is massively scalable, and does not suffer from several shortcomings of indium tin oxide. A proof-of-concept application in a polymer solar cell with power conversion efficiency of 0.85% is demonstrated. Preliminary experiments in chemical doping are presented and show that optimization of this material is not limited to improvements in layer morphology.

Graphene via sonication assisted liquid-phase exfoliation

Abstract: Graphene, the 2D form of carbon based material existing as a single layer of atoms arranged in a honeycomb lattice, has set the science and technology sectors alight with interest in the last decade in view of its astounding electrical and thermal properties, combined with its mechanical stiffness, strength and elasticity. Two distinct strategies have been undertaken for graphene production, i.e. the bottom-up and the top-down. The former relies on the generation of graphene from suitably designed molecular building blocks undergoing chemical reaction to form covalently linked 2D networks. The latter occurs via exfoliation of graphite into graphene. Bottom-up techniques, based on the organic syntheses starting from small molecular modules, when performed in liquid media, are both size limited, because macromolecules become more and more insoluble with increasing size, and suffer from the occurrence of side reactions with increasing molecular weight. Because of these reasons such a synthesis has been performed more and more on a solid (ideally catalytically active) surface. Substrate-based growth of single layers can be done also by chemical vapor deposition (CVD) or via reduction of silicon carbide, which unfortunately relies on the ability to follow a narrow thermodynamic path. Top-down approaches can be accomplished under different environmental conditions. Alongside the mechanical cleavage based on the scotch tape approach, liquid-phase exfoliation (LPE) methods are becoming more and more interesting because they are extremely versatile, potentially up-scalable, and can be used to deposit graphene in a variety of environments and on different substrates not available using mechanical cleavage or growth methods. Interestingly, LPE can be applied to produce different layered systems exhibiting different compositions such as BN, MoS2, WS2, NbSe2, and TaS2, thereby enabling the tuning of numerous physico-chemical properties of the material. Furthermore, LPE can be employed to produce graphene-based composites or films, which are key components for many applications, such as thin-film transistors, conductive transparent electrodes for indium tin oxide replacement, e.g. in light-emitting diodes, or photovoltaics. In this review, we highlight the recent progress that has led to successful production of high quality graphene by means of LPE of graphite. In particular, we discuss the mechanisms of exfoliation and methods that are employed for graphene characterization. We then describe a variety of successful liquid-phase exfoliation methods by categorizing them into two major classes, i.e. surfactant-free and surfactant-assisted LPE. Furthermore, exfoliation in aqueous and organic solutions is presented and discussed separately.