scispace - formally typeset
Search or ask a question
Topic

Ionic conductivity

About: Ionic conductivity is a research topic. Over the lifetime, 19412 publications have been published within this topic receiving 519167 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: A nanoporous polyimide film filled with a solid polymer electrolyte has high ionic conductivity and high mechanical strength, and an all-solid-state lithium-ion batteries fabricated with PI/PEO/LiTFSI solid electrolyte show good cycling performance and withstand abuse tests such as bending, cutting and nail penetration.
Abstract: The urgent need for safer batteries is leading research to all-solid-state lithium-based cells. To achieve energy density comparable to liquid electrolyte-based cells, ultrathin and lightweight solid electrolytes with high ionic conductivity are desired. However, solid electrolytes with comparable thicknesses to commercial polymer electrolyte separators (~10 μm) used in liquid electrolytes remain challenging to make because of the increased risk of short-circuiting the battery. Here, we report on a polymer–polymer solid-state electrolyte design, demonstrated with an 8.6-μm-thick nanoporous polyimide (PI) film filled with polyethylene oxide/lithium bis(trifluoromethanesulfonyl)imide (PEO/LiTFSI) that can be used as a safe solid polymer electrolyte. The PI film is nonflammable and mechanically strong, preventing batteries from short-circuiting even after more than 1,000 h of cycling, and the vertical channels enhance the ionic conductivity (2.3 × 10−4 S cm−1 at 30 °C) of the infused polymer electrolyte. All-solid-state lithium-ion batteries fabricated with PI/PEO/LiTFSI solid electrolyte show good cycling performance (200 cycles at C/2 rate) at 60 °C and withstand abuse tests such as bending, cutting and nail penetration. A nanoporous polyimide film filled with a solid polymer electrolyte has high ionic conductivity and high mechanical strength. An all-solid-state battery made with an approximately 10-μm-thick film shows good cyclability at 60 °C and no dendrite formation.

661 citations

Journal ArticleDOI
TL;DR: An enhancement of the room-temperature lithium-ion conductivity is shown through the creation of nanostructured Li(3)PS(4), which has a wide electrochemical window and superior chemical stability against lithium metal.
Abstract: Lithium-ion-conducting solid electrolytes hold promise for enabling high-energy battery chemistries and circumventing safety issues of conventional lithium batteries. Achieving the combination of high ionic conductivity and a broad electrochemical window in solid electrolytes is a grand challenge for the synthesis of battery materials. Herein we show an enhancement of the room-temperature lithium-ion conductivity by 3 orders of magnitude through the creation of nanostructured Li3PS4. This material has a wide electrochemical window (5 V) and superior chemical stability against lithium metal. The nanoporous structure of Li3PS4 reconciles two vital effects that enhance the ionic conductivity: (1) the reduction of the dimensions to a nanometer-sized framework stabilizes the high-conduction β phase that occurs at elevated temperatures, and (2) the high surface-to-bulk ratio of nanoporous β-Li3PS4 promotes surface conduction. Manipulating the ionic conductivity of solid electrolytes has far-reaching implication...

658 citations

Journal ArticleDOI
TL;DR: In this article, the authors proposed a mechanism of conductivity for the proton migration in polybenzimidazole (PB1) film, a candidate polymer electrolyte membrane (PEM) for high-temperature (120-200°C) fuel cells, was cast from PBI/trifluoacetyl/H 3 PO 4 solution with constant molecular weight PBI powder and various acid doping levels.
Abstract: Polybenzimidazole (PB1) film, a candidate polymer electrolyte membrane (PEM) for high-temperature (120-200°C) fuel cells, was cast from PBI/trifluoacetyl/H 3 PO 4 solution with constant molecular weight PBI powder and various acid doping levels. Conductivity measurements on these membranes were performed using an ac method under controlled temperature and relative humidity (RH). A complete set of conductivity data for H 3 PO 4 acid-doped PBI is presented as a function of temperature (60-200°C), RH (5-30%), and acid doping level (300-600 mol %). A mechanism of conductivity is proposed for the proton migration in this PBI/acid system based on this and previous work. Proton transfer in this system appears to occur along different paths for different doping levels, RHs, and temperatures. Hydrogen bonds immobilize the anions and form a network for proton transfer by a Grotthuss mechanism. The rate of proton transfer involving H 2 O is faster, leading to higher conductivity at higher RH. The order of the rate of proton transfer between various species is H 3 PO 4 (H 2 PO 4 -)...H-O-H> H 3 PO 4 ...H 2 PO - 4 > N-H + ...H 2 PO 4 - + N-H + ...H-O-H > N-H + ...N-H. The upper limit of proton conductivity is given by the conductivity of the liquid state H 3 PO 4 .

642 citations

Journal ArticleDOI
TL;DR: In this paper, Li5La3M2O12 (M = Nb, Ta), possessing a garnet-like structure, has been investigated with regard to their electrical properties.
Abstract: Lithium metal oxides with the nominal composition Li5La3M2O12 (M = Nb, Ta), possessing a garnetlike structure, have been investigated with regard to their electrical properties. These compounds form a new class of solid-state lithium ion conductors with a different crystal structure compared with all those known so far. The materials are prepared by solid-state reaction and characterized by powder XRD and ac impedance to determine their lithium ionic conductivity. Both the niobium and tantalum members exhibit the same order of magnitude of bulk conductivity (∼10−6 S/cm at 25°C). The activation energies for ionic conductivity (<300°C) are 0.43 and 0.56 eV for Li5La3Nb2O12 and Li5La3Ta2O12, respectively, which are comparable to those of other solid lithium conductors, such as Lisicon, Li14ZnGe4O16. Among the investigated materials, the tantalum compound Li5La3Ta2O12 is stable against reaction with molten lithium. Further tailoring of the compositions by appropriate chemical substitutions and improved synthesizing methods, especially with regard to minimizing grain-boundary resistance, are important issues in view of the potential use of the new class of compounds as electrolytes in practical lithium ion batteries.

640 citations

Journal ArticleDOI
TL;DR: In this paper, the performance of MnO2 nanorods prepared by a precipitation reaction was investigated in 0.5 mol/L Li2SO4, Na2SO 4, and KSO4 aqueous electrolyte solutions.
Abstract: The electrochemical performance of MnO2 nanorods prepared by a precipitation reaction was investigated in 0.5 mol/L Li2SO4, Na2SO4, and K2SO4 aqueous electrolyte solutions. Results show that at the slow scan rates, the nanorods show the largest capacitance (201 F/g) in Li2SO4 electrolyte since the reversible intercalation/deintercalation of Li+ in the solid phase produces an additional capacitance besides the capacitance based on the absorption/desorption reaction. At fast scan rates they show the largest capacitance in the K2SO4 electrolyte due to the smallest hydration radius of K+, highest ionic conductivity, and lowest equivalent series resistance (ESR). An asymmetric activated carbon (AC)/K2SO4/MnO2 supercapacitor could be cycled reversibly between 0 and 1.8 V with an energy density of 17 Wh/kg at 2 kW/kg, much higher than those of the AC/K2SO4/AC supercapacitor and AC/Li2SO4/LiMn2O4 hybrid supercapacitor. Moreover, this supercapacitor exhibits excellent cycling behavior with no more than 6% capacita...

637 citations


Network Information
Related Topics (5)
Oxide
213.4K papers, 3.6M citations
89% related
Thin film
275.5K papers, 4.5M citations
86% related
Carbon nanotube
109K papers, 3.6M citations
86% related
Graphene
144.5K papers, 4.9M citations
86% related
Raman spectroscopy
122.6K papers, 2.8M citations
86% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
20231,167
20222,073
20211,175
20201,117
20191,030
2018966