Showing papers on "Link-state routing protocol published in 1990"

A New Optimization Algorithm for the Vehicle Routing Problem with Time Windows

Abstract: The vehicle routing problem with time windows VRPTW is a generalization of the vehicle routing problem where the service of a customer can begin within the time window defined by the earliest and the latest times when the customer will permit the start of service. In this paper, we present the development of a new optimization algorithm for its solution. The LP relaxation of the set partitioning formulation of the VRPTW is solved by column generation. Feasible columns are added as needed by solving a shortest path problem with time windows and capacity constraints using dynamic programming. The LP solution obtained generally provides an excellent lower bound that is used in a branch-and-bound algorithm to solve the integer set partitioning formulation. Our results indicate that this algorithm proved to be successful on a variety of practical sized benchmark VRPTW test problems. The algorithm was capable of optimally solving 100-customer problems. This problem size is six times larger than any reported to date by other published research.

Dynamic routing system for a multinode communications network

Abstract: A communication network having a multiplicity of nodes provides efficient exchange of messages between the nodes. The messages may be originated and received by the computers of a parallel computer system, the processors and associated memories of which are connected to each node. Each node includes a routing system which results in efficient system performance for the parallel computer system associated with the nodes. The messages have control information (a message tag) to which the routing system at each node is responsive. The tag contains data identifying the destination node of the message in the network and prioritization data which, when the message is generated, is initialized to have a value (weight) corresponding to the length (number of links) of the minimal path from the source node where the message originates to the destination node of the message. The routing system utilizes the weights to establish message priority. The routing system receives and sends messages not exceeding the number of links connected thereto on each cycle such that messages flow in and flow out of each routing node on each cycle without being held or stored in queues in the node. Messages of lesser priority are switched by the router to alternate links in accordance with their weights thereby dynamically routing and resolving conflicts among messages.

A detailed router for field-programmable gate arrays

Abstract: A detailed routing algorithm, called the coarse graph expander (CGE), that has been designed specifically for field-programmable gate arrays (FPGAs) is described. The algorithm approaches this problem in a general way, allowing it to be used over a wide range of different FPGA routing architectures. It addresses the issue of scarce routing resources by considering the side effects that the routing of one connection has on another, and also has the ability to optimize the routing delays of time-critical connections. CGE has been used to obtain excellent routing results for several industrial circuits implemented in FPGAs with various routing architectures. The results show that CGE can route relatively large FPGAs in very close to the minimum number of tracks as determined by global routing, and it can successfully optimize the routing delays of time-critical connections. CGE has a linear run time over circuit size. >

Adaptive fault-tolerant routing in hypercube multicomputers

Abstract: A connected hypercube with faulty links and/or nodes is called an injured hypercube. A distributed adaptive fault-tolerant routing scheme is proposed for an injured hypercube in which each node is required to know only the condition of its own links. Despite its simplicity, this scheme is shown to be capable of routing messages successfully in an injured n-dimensional hypercube as long as the number of faulty components is less than n. Moreover, it is proved that this scheme routes messages via shortest paths with a rather high probability, and the expected length of a resulting path is very close so that of a shortest path. Since the assumption that the number of faulty components is less than n in an n-dimensional hypercube might limit the usefulness of the above scheme, a routing scheme based on depth-first search which works in the presence of an arbitrary number of faulty components is introduced. Due to the insufficient information on faulty components, however, the paths chosen by this scheme may not always be the shortest. To guarantee all messages to be routed via shortest paths, the authors propose to equip every node with more information than that on its own links. The effects of this additional information on routing efficiency are analyzed, and the additional information to be kept at each node for the shortest path routing is determined. Several examples and remarks are given to illustrate the results. >

Method for providing an efficient and adaptive management of message routing in a multi-platform and apparatus communication system

Abstract: The method for providing an efficient and adaptive management of message routing in a multi-platform, communication system having dynamically changing platform populations and dynamically changing connectivities between platforms where each of the platforms are capable of performing the steps of recognizing at least certain ones of the platforms in the system, deriving from at least one of the recognized platforms the quality of interconnectivities of the recognized platforms and certain others of the platforms in the system; and employing the derived quality of interconnectivities to make connectivity-based routing decisions using a selective one of a point-to-point routing algorithm, a point-to-multipoint routing algorithm and a broadcast routing algorithm.

Routing method and routing system for switching system having a plurality of paths

Abstract: A routing method routes cells which are transferred through one of a plurality of paths within an asynchronous transfer mode (ATM) switching system (50, 10) selected by routing information. The routing method includes the steps of adding first routing information to incoming cells at an input stage of the ATM switching system when supplying the cells to the ATM switching system, generating a route switching confirmation cell in response to a route switching instruction and for adding second routing information to incoming cells thereafter so as to supply the route switching confirmation cell and the cells added with the second routing information to the ATM switching system, where the second routing information is different from the first routing information and is determined by the route switching instruction, comparing routing information of the cells with the second routing information at an output stage of the ATM switching system in response to the route switching instruction, outputting each cell from the ATM switching system having routing information different from the second routing information as it is, and temporarily storing each cell from the ATM switching system having routing information identical to the second routing information and reading out and outputting the stored cell after the route switching confirmation cell is output from the ATM switching system.

Updating link state information in networks

Abstract: Methods and apparatus for sending link state information through a network of nodes interconnected by links. Link state packets (LSPs) are fragmented, and the fragments are sent individually through the network. The network routers may update their link state databases and perform routing without having to receive and reassemble all of the fragments. When the state of a link changes, only an amended version of the fragment affected by the change is transmitted. In another aspect, the invention features methods and apparatus for transmitting LSP sequence number information through the network. First, the link state packets being stored by a node are ordered alphabetically according to their source node. Next, a range of this order is selected and placed in a summary packet indicating the boundaries of the selected range and, for each link state packet in the selected range, the source and sequence number of the stored link state packet.

Routing system to interconnect local area networks

Abstract: A transmission system transmits data among interconnected local area networks using a bridge coupled between local area networks which senses whether the data originating node transmitted the data using transparent routing or source routing. The bridges provide interconnection at the MAC-layer and based upon information contained in the MAC-layer header, automatically perform either transparent routing or source routing, depending upon the type of routing used by the data originating node. In addition, the bridge provides source routing over multiple wide area channels to those nodes which use source routing.

A gridless router for industrial design rules

Abstract: A point-to-point routing algorithm with three new features is presented. First, the router makes optimal use of oversized, rectangular contacts. Second, it allows different wire width on different layers, with the layers having complete freedom as to routing direction. These two features make the algorithm attractive for MOS layout applications. Finally, it is able to realize an all-angle routing and to accept all-angle obstacles, a feature interesting for hybrid and PCB routing. The router is gridless and guarantees a solution if one exists. Since it is based on computational geometry algorithms, it offers a low run-time complexity. The ideas have been implemented in a prototype version for 45 degrees routing. The results indicate that the router performs well, even on large designs. >

Routing and flow control in high-speed wide-area networks

Abstract: The routing and flow control techniques developed for wide-area, local-area, and metropolitan-area networks are surveyed. A classification that shows the characteristics that are desirable for high-speed wide-area networks is developed. On the basis of the classification, techniques that should and should not be considered for future high-speed networks are identified. In particular, an attempt is made to determine the effect of increasing transmission rates on the routing and flow control algorithms that are used in packet-switched networks. >

Shortest path first with emergency exits

Abstract: Under heavy and dynamic traffic, the SPF routing algorithm often suffers from wild oscillation and severe congestion, and results in degradation of the network performance. In this paper, we present a new routing algorithm (SPF-EE) which attempts to eliminate the problems associated with the SPF algorithm by providing alternate paths as emergency exits. With the SPF-EE algorithm, traffic is routed along the shortest-paths under normal condition. However, in the presence of congestion and resource failures, the traffic can be dispersed temporarily to alternate paths without route re-computation. Simulation experiments show that the SPF-EE algorithm achieves grater throughput, higher responsiveness, better congestion control and fault tolerance, and substantially improves the performance of routing in a dynamic environment.

Locally-optimal deflection routing in the Bidirectional Manhattan Network

Abstract: A class of shortest-path distributed-routing techniques is presented, and the authors show a locally optimal solution under uniform traffic assumptions. It is argued that, as the number of nodes grows to infinity, the throughput tends to the limit represented by the maximum throughput attainable with the store-and-forward technique and infinite queueing storage. The results obtained show the suitability, as far as the throughput is concerned, of meshed networks using packet switching without storing packets at nodes. The routing techniques investigated perform similarly. At least one of these is simple enough to be implemented with very-fast circuitry, able to cope with the speed foreseen in future metropolitan-area networks (MANs). >

Communication circuit switching or parallel operation system

Abstract: The communication system has a plurality of sub-networks, for example composed of transmission communication nodes, PBX communication notes, application communication nodes, and the like, respectively. Each of these sub-networks is managed by a management system, and all of the management systems are managed by an integrated management system. Each communication node is autonomously provided with the function of establishing an emergency routing as a first stage routing control on the occurrence of a failure in a circuit affecting the communication node. The autonomous routing is heirarchial with respect to node types. Failure and the influences of failure are reported to the sub-network management systems, which in turn can report to the integrated management system. As a second stage of routing control, one or more of the management systems establishes a global routing to replace the emergency local routing. The global routing may take effect if the managment system determines that the failure cannot be corrected within a substantially fixed period of time.

An analysis of 'hot-potato' routing in a fiber optic packet switched hypercube

Abstract: Two implementations of a fiber-optic packet-switched hypercube are proposed. In the first, each directed link is implemented with a fixed wavelength laser and photodetector, and all optical transmissions are wavelength multiplexed onto one or more fibers. In the second, the electronic crosspoint matrices within the nodes are eliminated by allowing each laser to be tunable over a range of log N wavelengths. Assume that a hot potato, or deflection, routing algorithm is used; as soon as a packet is received at a node, a routing decision is made and the packet is sent out. The node attempts to send the packet towards its destination. The analysis indicates that a hypercube, hot-potato routing offers essentially optimal performance for random traffic, regardless of how large the hypercube grows, and it significantly outperforms traditional shortest-path routing with buffering and flow control. A few variations, including an algorithm which gives priority to packets closer to their destinations and one which gives priority to various classes of traffic, are also proposed and analyzed. >

A unified approach to off-line permutation routing on parallel networks

Abstract: A unified framework for finding efficient permutation routes on parallel networks in an off-line setting is presented. If the underlying graph of a parallel network contains an appropriate “approximate” product structure then our method guarantees the existence of non-blocking near-optimal permutation routes. The routes in question can be determined in polynomial time. Furthermore, our results are extended to finding permutation routes among the remaining “live” nodes in a faulty network.

General models and algorithms for over-the-cell routing in standard cell design

Abstract: When an over-the-cell routing layer is available for standard cell layout, efficient utilization of routing space over the cells can significantly reduce layout area. In this paper, we present three physical models to utilize the area over the cells for routing in standard cell designs. We also present efficient algorithms to choose and to route a planar subset of nets over the cells so that the resulting channel density is reduced as much as possible. For each of the physical models, we show how to arrange inter-cell routing, over-the-cell routing and power/ground busses to achieve valid routing solutions. Each algorithm exploits the particular arrangement in the corresponding physical model and produces provably good results in polynomial time. We tested our algorithms on several industrial standard cell designs. In our tests, this method reduces total channel density as much as 21%.

Distributed algorithms for shortest-path, deadlock-free routing and broadcasting in arbitrarily faulty hypercubes

Abstract: The authors present a distributed table-filling algorithm for point-to-point routing in a degraded hypercube system. This algorithm finds the shortest length existing path from each source to each destination in the faulty hypercube and fills the routing tables so that messages are routed along these paths. A novel scheme for broadcast routing with tables is proposed, and the algorithm required to fill the broadcast tables, given the point-to-point routing tables, is presented. In addition, the modifications necessary to make these algorithms ensure deadlock-free routing are given. A quantitative and equalitative comparison of previously proposed reroute strategies with table routing, where the tables are filled by the authors' algorithms, are presented. >

Maximum free circuit routing in circuit-switched networks

Abstract: An analysis is made of an alternate-path routing rule called maximum free circuit routing (MFCR). In the use of MFCR, a call is routed to the alternate path that has the maximum number of free circuits when the direct path is blocked. Analytical results show that in conjunction with trunk reservation, this routing rule can offer a stable throughput at high traffic conditions and can increase the call carrying capacity by about 20% (compared to direct path routing) under a blocking requirement of 10/sup -2/ on a fully connected symmetrical nonhierarchical network. >

A 3-stage interconnection structure for very large packet switches

Abstract: Proposes a three-stage broadband packet-switch architecture for a future central office with more than 16000 ports. The switch is constructed by interconnecting many small independent switch modules, which can be implemented using modifications of various well-studied switch fabric designs. Multiple paths are provided for each input-output pair, and the channel grouping technique is used to decrease delay and increase throughput. A datagram packet routing approach is adopted in order to eliminate the table lookup that will be required by virtual-circuit routing. Ways of guaranteeing the sequence integrity of packets are discussed. It is estimated from performance analyses that 32768-port switches can be constructed and can perform well based on switch fabrics of no more than 128 ports. >

Distributed dynamic routing schemes

Abstract: Schemes that do not explicitly use much information about the state of networks are briefly surveyed, with the focus on dynamic alternative routing (DAR), a simple but highly effective routing method currently planned for the British Telecom Network. State-dependent routing and how some of the methodology also has bearing on the control issue are discussed. The problem of dimensioning a network that uses dynamic routing (i.e. how much capacity is needed and where it should be put to provide an acceptable performance) is addressed. A practical example, which refers to routing in an international access network, is discussed. Some conclusions are drawn on the benefits and drawbacks of distributed routing. >

A new metric for dynamic routing algorithms

Abstract: A dynamic routing algorithm that has as its goal the control of congestion in a packet switching network is presented. The algorithm is based in part on the ARPANET SPF algorithm. However, instead of employing a delay metric, the authors make use of a combination of link and buffer utilizations. A detailed simulation model of the ARPANET was constructed to compare the performance of the congestion-based algorithm to the traditional delay-based (SPF) routing algorithm. The results indicate a substantial improvement in the delay and throughput of the network with the congestion-based routing algorithm. >

Design of inter-administrative domain routing protocols

Abstract: Policy Routing (PR) is a new area of development that attempts to incorporate policy related constraints on inter-Administrative Domain (AD) communication into the route computation and forwarding of inter-AD packets.Proposals for inter-AD routing mechanisms are discussed in the context of a design space defined by three design parameters: location of routing decision (i.e., source or hop-by-hop), algorithm used (i.e., link state or distance vector), and expression of policy in topology or in link status. We conclude that an architecture based upon source routing, a link state algorithm, and policy information in the link state advertisements, is best able to address the long-term policy requirements of inter-AD routing. However, such an architecture raises several new and challenging research issues related to scaling.

Dynamic routing schemes for international networks

Abstract: Major issues that should be examined in evaluating the performance of networks with dynamic routing are reviewed The characteristics of international 24-h traffic profiles are examined, and proposed dynamic routing schemes are described Gain allocation principles are discussed, and results on circuit savings and fault tolerance of international dynamic routing networks are outlined >

Automated interconnect routing system

Abstract: A method of manufacturing a multiple element circuit interconnect substrate is provided which provides an optimized routing plan. The routing plan is based upon a multi-dimensional binary data structure having nodes representing each terminal interconnect requirement which is preprocessed to order the required interconnects according to density.

Design and control of networks with dynamic nonhierarchical routing

Abstract: Dynamic routing concepts are described, and the design and control of dynamic routing networks is discussed. The vastly improved performance of the networks is illustrated with examples from operational experience. The evolution of dynamic routing with respect to several future directions is highlighted. These directions are extension to new networks and services, robust design and real-time adaptivity, and extension to interconnecting networks, including the Worldwide Intelligent Network. >

Routing in frequency-hop packet radio networks with partial-band jamming

Abstract: Describes research in adaptive, decentralized routing for frequency-hop packet radio networks with mobile partial-band jamming. A new routing technique, called least-resistance routing (LRR) is developed, and various versions of this routing method are examined. LRR uses a quantitative assessment of the interference environment at a radio to determine a resistance for that radio. This resistance is a measure of the interference the radio is likely to encounter when receiving a transmission. The investigation considers two components for the interference environment: transmissions from other radios and partial-band jamming. The resistances for each radio in a particular path are combined to form a path resistance. Packets are forwarded on the path to the destination with the least resistance. Comparisons are made between different versions of LRR and between LRR and previously developed adaptive routing techniques. It is found that LRR is an effective way for dealing with mobile jamming in a frequency-hop packet radio network. Significant increases in throughput and end-to-end probability of success are obtained by use of LRR. >