Showing papers on "Link-state routing protocol published in 2004"

Routing techniques in wireless sensor networks: a survey

Abstract: Wireless sensor networks consist of small nodes with sensing, computation, and wireless communications capabilities. Many routing, power management, and data dissemination protocols have been specifically designed for WSNs where energy awareness is an essential design issue. Routing protocols in WSNs might differ depending on the application and network architecture. In this article we present a survey of state-of-the-art routing techniques in WSNs. We first outline the design challenges for routing protocols in WSNs followed by a comprehensive survey of routing techniques. Overall, the routing techniques are classified into three categories based on the underlying network structure: flit, hierarchical, and location-based routing. Furthermore, these protocols can be classified into multipath-based, query-based, negotiation-based, QoS-based, and coherent-based depending on the protocol operation. We study the design trade-offs between energy and communication overhead savings in every routing paradigm. We also highlight the advantages and performance issues of each routing technique. The article concludes with possible future research areas.

Principles and Practices of Interconnection Networks

Abstract: One of the greatest challenges faced by designers of digital systems is optimizing the communication and interconnection between system components. Interconnection networks offer an attractive and economical solution to this communication crisis and are fast becoming pervasive in digital systems. Current trends suggest that this communication bottleneck will be even more problematic when designing future generations of machines. Consequently, the anatomy of an interconnection network router and science of interconnection network design will only grow in importance in the coming years. This book offers a detailed and comprehensive presentation of the basic principles of interconnection network design, clearly illustrating them with numerous examples, chapter exercises, and case studies. It incorporates hardware-level descriptions of concepts, allowing a designer to see all the steps of the process from abstract design to concrete implementation. ·Case studies throughout the book draw on extensive author experience in designing interconnection networks over a period of more than twenty years, providing real world examples of what works, and what doesn't. ·Tightly couples concepts with implementation costs to facilitate a deeper understanding of the tradeoffs in the design of a practical network. ·A set of examples and exercises in every chapter help the reader to fully understand all the implications of every design decision. Table of Contents Chapter 1 Introduction to Interconnection Networks 1.1 Three Questions About Interconnection Networks 1.2 Uses of Interconnection Networks 1.3 Network Basics 1.4 History 1.5 Organization of this Book Chapter 2 A Simple Interconnection Network 2.1 Network Specifications and Constraints 2.2 Topology 2.3 Routing 2.4 Flow Control 2.5 Router Design 2.6 Performance Analysis 2.7 Exercises Chapter 3 Topology Basics 3.1 Nomenclature 3.2 Traffic Patterns 3.3 Performance 3.4 Packaging Cost 3.5 Case Study: The SGI Origin 2000 3.6 Bibliographic Notes 3.7 Exercises Chapter 4 Butterfly Networks 4.1 The Structure of Butterfly Networks 4.2 Isomorphic Butterflies 4.3 Performance and Packaging Cost 4.4 Path Diversity and Extra Stages 4.5 Case Study: The BBN Butterfly 4.6 Bibliographic Notes 4.7 Exercises Chapter 5 Torus Networks 5.1 The Structure of Torus Networks 5.2 Performance 5.3 Building Mesh and Torus Networks 5.4 Express Cubes 5.5 Case Study: The MIT J-Machine 5.6 Bibliographic Notes 5.7 Exercises Chapter 6 Non-Blocking Networks 6.1 Non-Blocking vs. Non-Interfering Networks 6.2 Crossbar Networks 6.3 Clos Networks 6.4 Benes Networks 6.5 Sorting Networks 6.6 Case Study: The Velio VC2002 (Zeus) Grooming Switch 6.7 Bibliographic Notes 6.8 Exercises Chapter 7 Slicing and Dicing 7.1 Concentrators and Distributors 7.2 Slicing and Dicing 7.3 Slicing Multistage Networks 7.4 Case Study: Bit Slicing in the Tiny Tera 7.5 Bibliographic Notes 7.6 Exercises Chapter 8 Routing Basics 8.1 A Routing Example 8.2 Taxonomy of Routing Algorithms 8.3 The Routing Relation 8.4 Deterministic Routing 8.5 Case Study: Dimension-Order Routing in the Cray T3D 8.6 Bibliographic Notes 8.7 Exercises Chapter 9 Oblivious Routing 9.1 Valiant's Randomized Routing Algorithm 9.2 Minimal Oblivious Routing 9.3 Load-Balanced Oblivious Routing 9.4 Analysis of Oblivious Routing 9.5 Case Study: Oblivious Routing in the Avici Terabit Switch Router(TSR) 9.6 Bibliographic Notes 9.7 Exercises Chapter 10 Adaptive Routing 10.1 Adaptive Routing Basics 10.2 Minimal Adaptive Routing 10.3 Fully Adaptive Routing 10.4 Load-Balanced Adaptive Routing 10.5 Search-Based Routing 10.6 Case Study: Adaptive Routing in the Thinking Machines CM-5 10.7 Bibliographic Notes 10.8 Exercises Chapter 11 Routing Mechanics 11.1 Table-Based Routing 11.2 Algorithmic Routing 11.3 Case Study: Oblivious Source Routing in the IBM Vulcan Network 11.4 Bibliographic Notes 11.5 Exercises Chapter 12 Flow Control Basics 12.1 Resources and Allocation Units 12.2 Bufferless Flow Control 12.3 Circuit Switching 12.4 Bibliographic Notes 12.5 Exercises Chapter 13 Buffered Flow Control 13.1 Packet-Buffer Flow Control 13.2 Flit-Buffer Flow Control 13.3 Buffer Management and Backpressure 13.4 Flit-Reservation Flow Control 13.5 Bibliographic Notes 13.6 Exercises Chapter 14 Deadlock and Livelock 14.1 Deadlock 14.2 Deadlock Avoidance 14.3 Adaptive Routing 14.4 Deadlock Recovery 14.5 Livelock 14.6 Case Study: Deadlock Avoidance in the Cray T3E 14.7 Bibliographic Notes 14.8 Exercises Chapter 15 Quality of Service 15.1 Service Classes and Service Contracts 15.2 Burstiness and Network Delays 15.3 Implementation of Guaranteed Services 15.4 Implementation of Best-Effort Services 15.5 Separation of Resources 15.6 Case Study: ATM Service Classes 15.7 Case Study: Virtual Networks in the Avici TSR 15.8 Bibliographic Notes 15.9 Exercises Chapter 16 Router Architecture 16.1 Basic Router Architecture 16.2 Stalls 16.3 Closing the Loop with Credits 16.4 Reallocating a Channel 16.5 Speculation and Lookahead 16.6 Flit and Credit Encoding 16.7 Case Study: The Alpha 21364 Router 16.8 Bibliographic Notes 16.9 Exercises Chapter 17 Router Datapath Components 17.1 Input Buffer Organization 17.2 Switches 17.3 Output Organization 17.4 Case Study: The Datapath of the IBM Colony Router 17.5 Bibliographic Notes 17.6 Exercises Chapter 18 Arbitration 18.1 Arbitration Timing 18.2 Fairness 18.3 Fixed Priority Arbiter 18.4 Variable Priority Iterative Arbiters 18.5 Matrix Arbiter 18.6 Queuing Arbiter 18.7 Exercises Chapter 19 Allocation 19.1 Representations 19.2 Exact Algorithms 19.3 Separable Allocators 19.4 Wavefront Allocator 19.5 Incremental vs. Batch Allocation 19.6 Multistage Allocation 19.7 Performance of Allocators 19.8 Case Study: The Tiny Tera Allocator 19.9 Bibliographic Notes 19.10 Exercises Chapter 20 Network Interfaces 20.1 Processor-Network Interface 20.2 Shared-Memory Interface 20.3 Line-Fabric Interface 20.4 Case Study: The MIT M-Machine Network Interface 20.5 Bibliographic Notes 20.6 Exercises Chapter 21 Error Control 411 21.1 Know Thy Enemy: Failure Modes and Fault Models 21.2 The Error Control Process: Detection, Containment, and Recovery 21.3 Link Level Error Control 21.4 Router Error Control 21.5 Network-Level Error Control 21.6 End-to-end Error Control 21.7 Bibliographic Notes 21.8 Exercises Chapter 22 Buses 22.1 Bus Basics 22.2 Bus Arbitration 22.3 High Performance Bus Protocol 22.4 From Buses to Networks 22.5 Case Study: The PCI Bus 22.6 Bibliographic Notes 22.7 Exercises Chapter 23 Performance Analysis 23.1 Measures of Interconnection Network Performance 23.2 Analysis 23.3 Validation 23.4 Case Study: Efficiency and Loss in the BBN Monarch Network 23.5 Bibliographic Notes 23.6 Exercises Chapter 24 Simulation 24.1 Levels of Detail 24.2 Network Workloads 24.3 Simulation Measurements 24.4 Simulator Design 24.5 Bibliographic Notes 24.6 Exercises Chapter 25 Simulation Examples 495 25.1 Routing 25.2 Flow Control Performance 25.3 Fault Tolerance Appendix A Nomenclature Appendix B Glossary Appendix C Network Simulator

Routing in multi-radio, multi-hop wireless mesh networks

Abstract: We present a new metric for routing in multi-radio, multi-hop wireless networks. We focus on wireless networks with stationary nodes, such as community wireless networks.The goal of the metric is to choose a high-throughput path between a source and a destination. Our metric assigns weights to individual links based on the Expected Transmission Time (ETT) of a packet over the link. The ETT is a function of the loss rate and the bandwidth of the link. The individual link weights are combined into a path metric called Weighted Cumulative ETT (WCETT) that explicitly accounts for the interference among links that use the same channel. The WCETT metric is incorporated into a routing protocol that we call Multi-Radio Link-Quality Source Routing.We studied the performance of our metric by implementing it in a wireless testbed consisting of 23 nodes, each equipped with two 802.11 wireless cards. We find that in a multi-radio environment, our metric significantly outperforms previously-proposed routing metrics by making judicious use of the second radio.

Tapestry: a resilient global-scale overlay for service deployment

Abstract: We present Tapestry, a peer-to-peer overlay routing infrastructure offering efficient, scalable, location-independent routing of messages directly to nearby copies of an object or service using only localized resources. Tapestry supports a generic decentralized object location and routing applications programming interface using a self-repairing, soft-state-based routing layer. The paper presents the Tapestry architecture, algorithms, and implementation. It explores the behavior of a Tapestry deployment on PlanetLab, a global testbed of approximately 100 machines. Experimental results show that Tapestry exhibits stable behavior and performance as an overlay, despite the instability of the underlying network layers. Several widely distributed applications have been implemented on Tapestry, illustrating its utility as a deployment infrastructure.

Routing in a delay tolerant network

Abstract: We formulate the delay-tolerant networking routing problem, where messages are to be moved end-to-end across a connectivity graph that is time-varying but whose dynamics may be known in advance. The problem has the added constraints of finite buffers at each node and the general property that no contemporaneous end-to-end path may ever exist. This situation limits the applicability of traditional routing approaches that tend to treat outages as failures and seek to find an existing end-to-end path. We propose a framework for evaluating routing algorithms in such environments. We then develop several algorithms and use simulations to compare their performance with respect to the amount of knowledge they require about network topology. We find that, as expected, the algorithms using the least knowledge tend to perform poorly. We also find that with limited additional knowledge, far less than complete global knowledge, efficient algorithms can be constructed for routing in such environments. To the best of our knowledge this is the first such investigation of routing issues in DTNs.

Probabilistic Routing in intermittently connected networks

Abstract: In this paper, we address the problem of routing in intermittently connected networks. In such networks there is no guarantee that a fully connected path between source and destination exists at any time, rendering traditional routing protocols unable to deliver messages between hosts. There does, however, exist a number of scenarios where connectivity is intermittent, but where the possibility of communication still is desirable. Thus, there is a need for a way to route through networks with these properties. We propose PRoPHET, a probabilistic routing protocol for intermittently connected networks and compare it to the earlier presented Epidemic Routing protocol through simulations. We show that PRoPHET is able to deliver more messages than Epidemic Routing with a lower communication overhead.

Maximum lifetime routing in wireless sensor networks

Abstract: A routing problem in static wireless ad hoc networks is considered as it arises in a rapidly deployed, sensor based, monitoring system known as the wireless sensor network. Information obtained by the monitoring nodes needs to be routed to a set of designated gateway nodes. In these networks, every node is capable of sensing, data processing, and communication, and operates on its limited amount of battery energy consumed mostly in transmission and reception at its radio transceiver. If we assume that the transmitter power level can be adjusted to use the minimum energy required to reach the intended next hop receiver then the energy consumption rate per unit information transmission depends on the choice of the next hop node, i.e., the routing decision. We formulate the routing problem as a linear programming problem, where the objective is to maximize the network lifetime, which is equivalent to the time until the network partition due to battery outage. Two different models are considered for the information-generation processes. One assumes constant rates and the other assumes an arbitrary process. A shortest cost path routing algorithm is proposed which uses link costs that reflect both the communication energy consumption rates and the residual energy levels at the two end nodes. The algorithm is amenable to distributed implementation. Simulation results with both information-generation process models show that the proposed algorithm can achieve network lifetime that is very close to the optimal network lifetime obtained by solving the linear programming problem.

Measuring ISP topologies with Rocketfuel

Abstract: To date, realistic ISP topologies have not been accessible to the research community, leaving work that depends on topology on an uncertain footing. In this paper, we present new Internet mapping techniques that have enabled us to measure router-level ISP topologies. Our techniques reduce the number of required traces compared to a brute-force, all-to-all approach by three orders of magnitude without a significant loss in accuracy. They include the use of BGP routing tables to focus the measurements, the elimination of redundant measurements by exploiting properties of IP routing, better alias resolution, and the use of DNS to divide each map into POPs and backbone. We collect maps from ten diverse ISPs using our techniques, and find that our maps are substantially more complete than those of earlier Internet mapping efforts. We also report on properties of these maps, including the size of POPs, distribution of router outdegree, and the interdomain peering structure. As part of this work, we release our maps to the community.

A review of routing protocols for mobile ad hoc networks

Abstract: The 1990s have seen a rapid growth of research interests in mobile ad hoc networking. The infrastructureless and the dynamic nature of these networks demands new set of networking strategies to be implemented in order to provide efficient end-to-end communication. This, along with the diverse application of these networks in many different scenarios such as battlefield and disaster recovery, have seen MANETs being researched by many different organisations and institutes. MANETs employ the traditional TCP/IP structure to provide end-to-end communication between nodes. However, due to their mobility and the limited resource in wireless networks, each layer in the TCP/IP model require redefinition or modifications to function efficiently in MANETs. One interesting research area in MANET is routing. Routing in the MANETs is a challenging task and has received a tremendous amount of attention from researches. This has led to development of many different routing protocols for MANETs, and each author of each proposed protocol argues that the strategy proposed provides an improvement over a number of different strategies considered in the literature for a given network scenario. Therefore, it is quite difficult to determine which protocols may perform best under a number of different network scenarios, such as increasing node density and traffic. In this paper, we provide an overview of a wide range of routing protocols proposed in the literature. We also provide a performance comparison of all routing protocols and suggest which protocols may perform best in large networks.

Comparison of routing metrics for static multi-hop wireless networks

Abstract: Routing protocols for wireless ad hoc networks have traditionally focused on finding paths with minimum hop count. However, such paths can include slow or lossy links, leading to poor throughput. A routing algorithm can select better paths by explicitly taking the quality of the wireless links into account. In this paper, we conduct a detailed, empirical evaluation of the performance of three link-quality metrics---ETX, per-hop RTT, and per-hop packet pair---and compare them against minimum hop count. We study these metrics using a DSR-based routing protocol running in a wireless testbed. We find that the ETX metric has the best performance when all nodes are stationary. We also find that the per-hop RTT and per-hop packet-pair metrics perform poorly due to self-interference. Interestingly, the hop-count metric outperforms all of the link-quality metrics in a scenario where the sender is mobile.

A survey of secure wireless ad hoc routing

Abstract: Ad hoc networks use mobile nodes to enable communication outside wireless transmission range. Attacks on ad hoc network routing protocols disrupt network performance and reliability. The article reviews attacks on ad hoc networks and discusses current approaches for establishing cryptographic keys in ad hoc networks. We describe the state of research in secure ad hoc routing protocols and its research challenges.

Topology Dissemination Based on Reverse-Path Forwarding (TBRPF)

Abstract: Topology Dissemination Based on Reverse-Path Forwarding (TBRPF) is a proactive, link-state routing protocol designed for mobile ad-hoc networks, which provides hop-by-hop routing along shortest paths to each destination. Each node running TBRPF computes a source tree (providing paths to all reachable nodes) based on partial topology information stored in its topology table, using a modification of Dijkstra's algorithm. To minimize overhead, each node reports only *part* of its source tree to neighbors. TBRPF uses a combination of periodic and differential updates to keep all neighbors informed of the reported part of its source tree. Each node also has the option to report additional topology information (up to the full topology), to provide improved robustness in highly mobile networks. TBRPF performs neighbor discovery using "differential" HELLO messages which report only *changes* in the status of neighbors. This results in HELLO messages that are much smaller than those of other link-state routing protocols such as OSPF.

DyAD - smart routing for networks-on-chip

Abstract: In this paper, we present and evaluate a novel routing scheme called DyAD which combines the advantages of both deterministic and adaptive routing schemes. More precisely, we envision a new routing technique which judiciously switches between deterministic and adaptive routing based on the network's congestion conditions. The simulation results show the effectiveness of DyAD by comparing it with purely deterministic and adaptive routing schemes under different traffic patterns. Moreover, a prototype router based on the DyAD idea has been designed and evaluated. Compared to purely adaptive routers, the overhead of implementing DyAD is negligible (less than 7%), while the performance is consistently better.

A routing scheme for content-based networking

Abstract: This work proposes a routing scheme for content-based networking. A content-based network is a communication network that features a new advanced communication model where messages are not given explicit destination addresses, and where the destinations of a message are determined by matching the content of the message against selection predicates declared by nodes. Routing in a content-based network amounts to propagating predicates and the necessary topological information in order to maintain loop-free and possibly minimal forwarding paths for messages. The routing scheme we propose uses a combination of a traditional broadcast protocol and a content-based routing protocol. We present the combined scheme and its requirements over the broadcast protocol. We then detail the content-based routing protocol, highlighting a set of optimization heuristics. We also present the results of our evaluation, showing that this routing scheme is effective and scalable.

AODV routing protocol implementation design

Abstract: To date, the majority of ad hoc routing protocol research has been done using simulation only. One of the most motivating reasons to use simulation is the difficulty of creating a real implementation. In a simulator, the code is contained within a single logical component, which is clearly defined and accessible. On the other hand, creating an implementation requires use of a system with many components, including many that have little or no documentation. The implementation developer must understand not only the routing protocol, but all the system components and their complex interactions. Further, since ad hoc routing protocols are significantly different from traditional routing protocols, a new set of features must be introduced to support the routing protocol. In this paper we describe the event triggers required for AODV operation, the design possibilities and the decisions for our ad hoc on-demand distance vector (AODV) routing protocol implementation, AODV-UCSB. This paper is meant to aid researchers in developing their own on-demand ad hoc routing protocols and assist users in determining the implementation design that best fits their needs.

Single-copy routing in intermittently connected mobile networks

Abstract: Intermittently connected mobile networks are wireless networks where most of the time there does not exist a complete path from source to destination, or such a path is highly unstable and may break soon after it has been discovered. In this context, conventional routing schemes would fail. To deal with such networks we propose the use of an opportunistic hop-by-hop routing model. According to the model, a series of independent, local forwarding decisions are made, based on current connectivity and predictions of future connectivity information diffused through nodes' mobility. The important issue here is how to choose an appropriate next hop. To this end, we propose and analyze via theory and simulations a number of routing algorithms. The champion algorithm turns out to be one that combines the simplicity of a simple random policy, which is efficient in finding good leads towards the destination, with the sophistication of utility-based policies that efficiently follow good leads. We also state and analyze the performance of an oracle-based optimal algorithm, and compare it to the online approaches. The metrics used in the comparison are the average message delivery delay and the number of transmissions per message delivered.

A-STAR: A Mobile Ad Hoc Routing Strategy for Metropolis Vehicular Communications

Abstract: One of the major issues that affect the performance of Mobile Ad hoc NETworks (MANET) is routing. Recently, position-based routing for MANET is found to be a very promising routing strategy for inter-vehicular communication systems (IVCS). However, position-based routing for IVCS in a built-up city environment faces greater challenges because of potentially more uneven distribution of vehicular nodes, constrained mobility, and difficult signal reception due to radio obstacles such as high-rise buildings. This paper proposes a new position-based routing scheme called Anchor-based Street and Traffic Aware Routing (A-STAR), designed specifically for IVCS in a city environment. Unique to A-STAR is the usage of information on city bus routes to identify an anchor path with high connectivity for packet delivery. Along with a new recovery strategy for packets routed to a local maximum, the proposed protocol shows significant performance improvement in a comparative simulation study with other similar routing approaches.

Scenario-Based Planning for Partially Dynamic Vehicle Routing with Stochastic Customers

Abstract: The multiple vehicle routing problem with time windows (VRPTW) is a hard and extensively studied combinatorial optimization problem. This paper considers a dynamic VRPTW with stochastic customers, where the goal is to maximize the number of serviced customers. It presents a multiple scenario approach (MSA) that continuously generates routing plans for scenarios including known and future requests. Decisions during execution use a distinguished plan chosen, at each decision, by a consensus function. The approach was evaluated on vehicle routing problems adapted from the Solomon benchmarks with a degree of dynamism varying between 30% and 80%. They indicate that MSA exhibits dramatic improvements over approaches not exploiting stochastic information, that the use of consensus function improves the quality of the solutions significantly, and that the benefits of MSA increase with the (effective) degree of dynamism.

Minimum-energy multicast in mobile ad hoc networks using network coding

Abstract: The minimum energy required to transmit one bit of information through a network characterizes the most economical way to communicate in a network. In this paper, we show that, under a layered model of wireless networks, the minimum energy-per-bit for multicasting in a mobile ad hoc network can be found by a linear program; the minimum energy-per-bit can be attained by performing network coding. Compared with conventional routing solutions, network coding not only allows a potentially lower energy-per-bit to be achieved, but also enables the optimal solution to be found in polynomial time, in sharp contrast with the NP-hardness of constructing the minimum-energy multicast tree as the optimal routing solution. We further show that the minimum energy multicast formulation is equivalent to a cost minimization with linear edge-based pricing, where the edge prices are the energy-per-bits of the corresponding physical broadcast links. This paper also investigates minimum energy multicasting with routing. Due to the linearity of the pricing scheme, the minimum energy-per-bit for routing is achievable by using a single distribution tree. A characterization of the admissible rate region for routing with a single tree is presented. The minimum energy-per-bit for multicasting with routing is found by an integer linear program. We show that the relaxation of this integer linear program, studied earlier in the Steiner tree literature, can now be interpreted as the optimization for minimum energy multicasting with network coding. In short, this paper presents a unifying study of minimum energy multicasting with network coding and routing.

Source-location privacy in energy-constrained sensor network routing

Abstract: As sensor-driven applications become increasingly integrated into our lives, issues related to sensor privacy will become increasingly important. Although many privacy-related issues can be addressed by security mechanisms, one sensor network privacy issue that cannot be adequately addressed by network security is confidentiality of the source sensor's location. In this paper, we focus on protecting the source's location by introducing suitable modifications to sensor routing protocols to make it difficult for an adversary to backtrack to the origin of the sensor communication. In particular, we focus on the class of flooding protocols. While developing and evaluating our privacy-aware routing protocols, we jointly consider issues of location-privacy as well as the amount of energy consumed by the sensor network. Motivated by the observations, we propose a flexible routing strategy, known as phantom routing, which protects the source's location. Phantom routing is a two-stage routing scheme that first consists of a directed walk along a random direction, followed by routing from the phantom source to the sink. Our investigations have shown that phantom routing is a powerful technique for protecting the location of the source during sensor transmissions.

Position Based Routing Algorithms for Ad Hoc Networks: A Taxonomy

Abstract: Recent availability of small inexpensive low power GPS receivers and techniques for finding relative coordinates based on signal strengths, and the need for the design of power efficient and scalable networks, provided justification for applying position based routing methods in ad hoc networks. A number of such algorithms were developed in last few years, in addition to few basic methods proposed about fifteen years ago. This article surveys known routing methods, and provides their taxonomy in terms of a number of characteristics: loop-free behavior, distributed operation (localized, global or zonal), path strategy (single path, multi-path or flooding based), metrics used (hop count, power or cost), memorization (memoryless or memorizing past traffic), guaranteed delivery, scalability, and robustness (strategies to handle the position deviation due to the dynamicity of the network). We also briefly discuss relevant issues such as physical requirements, experimental design, location updates, QoS, congestion, scheduling node activity, topology construction, broadcasting and network capacity.

Efficient routing for peer-to-peer overlays

Abstract: Most current peer-to-peer lookup schemes keep a small amount of routing state per node, typically logarithmic in the number of overlay nodes. This design assumes that routing information at each member node must be kept small, so that the bookkeeping required to respond to system membership changes is also small, given that aggressive membership dynamics are expected. As a consequence, lookups have high latency as each lookup requires contacting several nodes in sequence. In this paper, we question these assumptions by presenting two peer-to-peer routing algorithms with small lookup paths. First, we present a one-hop routing scheme. We show how to disseminate information about membership changes quickly enough so that nodes maintain accurate routing tables with complete membership information. We also deduce analytic bandwidth requirements for our scheme that demonstrate its feasibility. We also propose a two-hop routing scheme for large scale systems of more than a few million nodes, where the bandwidth requirements of one-hop routing can become too large. This scheme keeps a fixed fraction of the total routing state on each node, chosen such that the first hop has low latency, and thus the additional delay is small. We validate our analytic model using simulation results that show that our algorithms can maintain routing information sufficiently up-to-date such that a large fraction (e.g., 99%) of the queries will succeed without being re-routed.

The case for separating routing from routers

Abstract: Over the past decade, the complexity of the Internet's routing infrastructure has increased dramatically. This complexity and the problems it causes stem not just from various new demands made of the routing infrastructure, but also from fundamental limitations in the ability of today's distributed infrastructure to scalably cope with new requirements.The limitations in today's routing system arise in large part from the fully distributed path-selection computation that the IP routers in an autonomous system (AS) must perform. To overcome this weakness, interdomain routing should be separated from today's IP routers, which should simply forward packets (for the most part). Instead, a separate Routing Control Platform (RCP) should select routes on behalf of the IP routers in each AS and exchange reachability information with other domains.Our position is that an approach like RCP is a good way of coping with complexity while being responsive to new demands and can lead to a routing system that is substantially easier to manage than today. We present a design overview of RCP based on three architectural principles path computation based on a consistent view of network state, controlled interactions between routing protocol layers, and expressive specification of routing policies and discuss the architectural strengths and weaknesses of our proposal.

Improving the reliability of internet paths with one-hop source routing

Abstract: Recent work has focused on increasing availability in the face of Internet path failures. To date, proposed solutions have relied on complex routing and path-monitoring schemes, trading scalability for availability among a relatively small set of hosts. This paper proposes a simple, scalable approach to recover from Internet path failures. Our contributions are threefold. First, we conduct a broad measurement study of Internet path failures on a collection of 3,153 Internet destinations consisting of popular Web servers, broad-band hosts, and randomly selected nodes. We monitored these destinations from 67 PlanetLab vantage points over a period of seven days, and found availabilities ranging from 99.6% for servers to 94.4% for broadband hosts. When failures do occur, many appear too close to the destination (e.g., last-hop and end-host failures) to be mitigated through alternative routing techniques of any kind. Second, we show that for the failures that can be addressed through routing, a simple, scalable technique, called one-hop source routing, can achieve close to the maximum benefit available with very low overhead. When a path failure occurs, our scheme attempts to recover from it by routing indirectly through a small set of randomly chosen intermediaries. Third, we implemented and deployed a prototype one-hop source routing infrastructure on PlanetLab. Over a three day period, we repeatedly fetched documents from 982 popular Internet Web servers and used one-hop source routing to attempt to route around the failures we observed. Our results show that our prototype successfully recovered from 56% of network failures. However, we also found a large number of server failures that cannot be addressed through alternative routing. Our research demonstrates that one-hop source routing is easy to implement, adds negligible overhead, and achieves close to the maximum benefit available to indirect routing schemes, without the need for path monitoring, history, or a-priori knowledge of any kind.

Maximum lifetime routing in wireless ad-hoc networks

Abstract: Routing problems in mobile ad-hoc networks (MANET) have been receiving increasing attention in the last few years. Most of the proposed routing protocols concentrate on finding and maintaining routes in the face of changing topology caused by mobility or other environmental changes. More recently, power-aware routing protocols and topology control algorithms have been developed to address the issue of limited energy reserve of the nodes in ad-hoc networks. We consider the routing problem in MANET with the goal of maximizing the life time of the network. We propose a distributed routing algorithm that reaches the optimal (centralized) solution to within an asymptotically small relative error. Our approach is based on the formulation of multicommodity flow, and it allows to consider different power consumption models and bandwidth constraints. It works for both static and slowly changing dynamic networks.

Concepts of exact QoS routing algorithms

Abstract: The underlying concepts of an exact QoS routing algorithm are explained. We show that these four concepts, namely 1) nonlinear definition of the path length; 2) a /spl kappa/-shortest path approach; 3) nondominance; and 4) look-ahead, are fundamental building blocks of a multiconstrained routing algorithm. The main reasons to consider exact multiconstrained routing algorithms are as follows. First, the NP-complete behavior seems only to occur in specially constructed graphs, which are unlikely to occur in realistic communication networks. Second, there exist exact algorithms that are equally complex as heuristics in algorithmic structure and in running time on topologies that do not induce NP-complete behavior. Third, by simply restricting the number /spl kappa/ of paths explored during the path computation, the computational complexity can be decreased at the expense of possibly loosing exactness. The presented four concepts are incorporated in SAMCRA, a self-adaptive multiple constraints routing algorithm.

Load balancing in ad hoc networks: single-path routing vs. multi-path routing

Abstract: Multi-path routing has been studied thoroughly in the context of wired networks. Ii has been shown that using multiple paths to route messages between any source-destination pair of nodes (instead of using a single path) balances the load more evenly throughout the network. The common belief is that the same is true for ad hoc networks, i.e., multi-path routing balances the load significantly better than single-path routing. We show that this is not necessarily the case. We introduce a new model for evaluating the load balance under multi-path routing, when the paths chosen are the first K shortest paths (for a pre-specified K). Using this model, we show that unless we use a very large number of paths (which is very costly and therefore infeasible) the load distribution is almost the same as single shortest path routing. This is in contrary to the previous existing results which assume that multi-path routing distributes the load uniformly.

Adaptive routing with end-to-end feedback: distributed learning and geometric approaches

Abstract: Minimal delay routing is a fundamental task in networks. Since delays depend on the (potentially unpredictable) traffic distribution, online delay optimization can be quite challenging. While uncertainty about the current network delays may make the current routing choices sub-optimal, the algorithm can nevertheless try to learn the traffic patterns and keep adapting its choice of routing paths so as to perform nearly as well as the best static path. This online shortest path problem is a special case of online linear optimization, a problem in which an online algorithm must choose, in each round, a strategy from some compact set S ⊆ Rd so as to try to minimize a linear cost function which is only revealed at the end of the round. Kalai and Vempala[4] gave an algorithm for such problems in the transparent feedback model, where the entire cost function is revealed at the end of the round. Here we present an algorithm for online linear optimization in the more challenging opaque feedback model, in which only the cost of the chosen strategy is revealed at the end of the round. In the special case of shortest paths, opaque feedback corresponds to the notion that in each round the algorithm learns only the end-to-end cost of the chosen path, not the cost of every edge in the network.We also present a second algorithm for online shortest paths, which solves the shortest-path problem using a chain of online decision oracles, one at each node of the graph. This has several advantages over the online linear optimization approach. First, it is effective against an adaptive adversary, whereas our linear optimization algorithm assumes an oblivious adversary. Second, even in the case of an oblivious adversary, the second algorithm performs better than the first, as measured by their additive regret.