Showing papers on "Lipase published in 2018"

Enzymes in Lipid Modification

Abstract: This article reviews the application of enzymes in lipid modification. Lipases are the most established biocatalysts used for the synthesis of structured triacylglycerols, fats, and margarine and for the release of flavoring fatty acids for food applications. In addition, the various enzymes, such as P450 monooxygenases, hydratases, lipoxygenases, and certain lyases, used for oxyfunctionalization and the phospholipases used for degumming are covered. Basic aspects of enzyme catalysis and the modern tools used for their discovery and improvement by protein engineering provide insight into how suitable biocatalysts can be identified and optimized for an application. In addition to isolated enzymes, whole-cell engineered microorganisms are also used for lipid modification. Thus, the polyunsaturated fatty acid EPA (eicosapentaenoic acid) can be produced in a yeast using sugar as a renewable resource.

Novel nanohybrid biocatalyst: application in the kinetic resolution of secondary alcohols

Abstract: In this work, a nanohybrid material was developed and used for the first time to the kinetic resolution of secondary alcohols as rac-indanol, rac-1-phenylethanol (rac-1), rac-1-(3-bromophenyl)-1-ethanol (rac-2) and rac-1-(3-methylphenyl)-1-ethanol (rac-3). Chiral indanol is used as a precursor intermediate for the synthesis of enantiomeric drugs, such as (+)-Indatraline, Irindalone, Indinavir, (+)-Sertraline and Rasagiline mesylate. Chiral 1-phenylethanol is used as an ophthalmic preservative, a solvatochromic dye and an inhibitor of cholesterol absorption and as a mild floral fragrance. For this purpose, the ultrasound irradiation was used to couple APTES on the superparamagnetic nanoparticles surface. Then, the system was activated with glutaraldehyde and used as a support for immobilization of lipase from Pseudomonas fluorescens. Thermal stability analysis was performed in buffer and hexane, showing an excellent stability in buffer solution at 60 °C, holding 72% of the initial activity, even after 7 h. In hexane (40 °C), the immobilized enzyme retained 100% of activity with 693 min of half-life time at 50 °C. The high thermal stability is mainly related to the covalent bonding between enzymes and support. Immobilized lipase on magnetic support proved to be a robust biocatalyst in the kinetic resolution, leading to (S)-indanol with high selectivity (e.e. > 99%, E > 200) in 1.75 h at 50 °C, being reused five times without significant loss of the activity and selectivity. The kinetic resolution of rac-1, via acetylation reaction, catalyzed by lipase from Pseudomonas fluorescens immobilized on magnetic support, led to (R)-acetate with enantiomeric excess > 99% and to the remaining (S)-alcohol with enantiomeric excess of 94%, conversion of 49% and E > 200, after 48 h of reaction at 40 °C. Under the same reactions conditions, rac-2 and rac-3 were slightly less reactive, since the corresponding (R)-acetates were obtained with conversion values of 44%, but with high enantioselectivity (enantiomeric excesses > 99% and E values > 200). These results correspond to an important step in heterogeneous catalysis due to the ability to obtain important precursors for the synthesis of enantiomerically pure chiral drugs and other bioactive substances.

Spatially confined lignin nanospheres for biocatalytic ester synthesis in aqueous media

Abstract: Dehydration reactions proceed readily in water-filled biological cells. Development of biocatalysts that mimic such compartmentalized reactions has been cumbersome due to the lack of low-cost nanomaterials and associated technologies. Here we show that cationic lignin nanospheres function as activating anchors for hydrolases, and enable aqueous ester synthesis by forming spatially confined biocatalysts upon self-assembly and drying-driven aggregation in calcium alginate hydrogel. Spatially confined microbial cutinase and lipase retain 97% and 70% of their respective synthetic activities when the volume ratio of water to hexane increases from 1:1 to 9:1 in the reaction medium. The activity retention of industrially most frequently used acrylic resin-immobilized Candida antarctica lipase B is only 51% under similar test conditions. Overall, our findings enable fabrication of robust renewable biocatalysts for aqueous ester synthesis, and provide insight into the compartmentalization of diverse heterogeneous catalysts.

Kinetic resolution of drug intermediates catalyzed by lipase B from Candida antarctica immobilized on immobead‐350

Abstract: Novozyme 435, which is a commercial immobilized lipase B from Candida antarctica (CALB), has been proven to be inadequate for the kinetic resolution of rac-indanyl acetate. As it has been previously described that different immobilization protocols may greatly alter lipase features, in this work, CALB was covalently immobilized on epoxy Immobead-350 (IB-350) and on glyoxyl-agarose to ascertain if better kinetic resolution would result. Afterwards, all CALB biocatalysts were utilized in the hydrolytic resolution of rac-indanyl acetate and rac-(chloromethyl)-2-(o-methoxyphenoxy) ethyl acetate. After optimization of the immobilization protocol on IB-350, its loading capacity was 150 mg protein/g dried support. Furthermore, the CALB-IB-350 thermal and solvent stabilities were higher than that of the soluble enzyme (e.g., by a 14-fold factor at pH 5-70°C and by a 11-fold factor in dioxane 30%-65°C) and that of the glyoxyl-agarose-CALB (e.g., by a 12-fold factor at pH 10-50°C and by a 21-fold factor in dioxane 30%-65°C). The CALB-IB-350 preparation (with 98% immobilization yield and activity versus p-nitrophenyl butyrate of 6.26 ± 0.2 U/g) was used in the hydrolysis of rac-indanyl acetate using a biocatalyst/substrate ratio of 2:1 and a pH value of 7.0 at 30°C for 24 h. The conversion obtained was 48% and the enantiomeric excess of the product (e.e.p ) was 97%. These values were much higher than the ones obtained with Novozyme 435, 13% and 26% of conversion and e.e.p, respectively. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:878-889, 2018.

X-Shaped ZIF-8 for Immobilization Rhizomucor miehei Lipase via Encapsulation and Its Application toward Biodiesel Production

Abstract: This study presents a one-step encapsulation method for synthesizing X-shaped zeolitic imidazolate frameworks (ZIF-8) and immobilizing Rhizomucor miehei lipase (RML). We proved that the morphological structure of ZIF-8 had changed after immobilization with enhanced characterization using a field-emission scanning electron microscope, an energy-dispersive spectrometer, a transmission electron microscope, a Fourier transform infrared spectrometer, and powder X-ray diffraction. The surface area and pore size of the carrier were investigated before and after immobilization using Brunauer–Emmett–Teller and Barrett–Joyner–Halenda methods, respectively. RML@ZIF-8 exhibited high recovery activity of up to 2632%, representing a 26-fold increase in its free lipase. Encapsulated RML was used for biodiesel production from soybean oil in an isooctane system with a conversion yield of 95.6% under optimum conditions. The resulting reusability of the immobilized enzyme indicated no substantial decline in the conversion yield, which remained at 84.7% of the initial activity after 10 cycles. The stability and high performance of the immobilized enzyme are attributed to the harmony between RML and ZIF-8 based on the easy synthesis of ZIF-8 and the short time required to immobilize RML.

Burkholderia cepacia lipase: A versatile catalyst in synthesis reactions

Abstract: The lipase from Burkholderia cepacia, formerly known as Pseudomonas cepacia lipase, is a commercial enzyme in both soluble and immobilized forms widely recognized for its thermal resistance and tolerance to a large number of solvents and short-chain alcohols. The main applications of this lipase are in transesterification reactions and in the synthesis of drugs (because of the properties mentioned above). This review intends to show the features of this enzyme and some of the most relevant aspects of its use in different synthesis reactions. Also, different immobilization techniques together with the effect of various compounds on lipase activity are presented. This lipase shows important advantages over other lipases, especially in reaction media including solvents or reactions involving short-chain alcohols.

Engineering Yarrowia lipolytica to Simultaneously Produce Lipase and Single Cell Protein from Agro-industrial Wastes for Feed.

Abstract: Lipases are scarcely exploited as feed enzymes in hydrolysis of lipids for increasing energy supply and improving nutrient use efficiency. In this work, we performed homologous overexpression, in vitro characterization and in vivo assessment of a lipase from the yeast Yarrowia lipolytica for feed purpose. Simultaneously, a large amount of yeast cell biomass was produced, for use as single cell protein, a potential protein-rich feed resource. Three kinds of low cost agro-industrial wastes were tested as substrates for simultaneous production of lipase and single cell protein (SCP) as feed additives: sugarcane molasses, waste cooking oil and crude glycerol from biodiesel production. Sugarcane molasses appeared as the most effective cheap medium, allowing production of 16420 U/ml of lipase and 151.2 g/L of single cell protein at 10 liter fermentation scale. In vitro characterization by mimicking a gastro-intestinal environment and determination of essential amino acids of the SCP, and in vivo oral feeding test on fish all revealed that lipase, SCP and their combination were excellent feed additives. Such simultaneous production of this lipase and SCP could address two main concerns of feed industry, poor utilization of lipid and shortage of protein resource at the same time.

Operational and Thermal Stability Analysis of Thermomyces lanuginosus Lipase Covalently Immobilized onto Modified Chitosan Supports.

Abstract: The aim of this paper was to evaluate different strategies of chitosan activation using cross-linking reagent like glycidol, epichlorohydrin, and glutaraldehyde for Thermomyces lanuginosus lipase (TLL) immobilization. Operational activity and stability by esterification of oleic acid with ethanol and thermal inactivation using these derivatives were investigated. Derivative obtained by sequentially activation with glycidol, ethylenediamine, and glutaraldehyde and subsequent TLL immobilization showed the best performance, with high hydrolytic activity value. Its stability was 15-fold higher than solubilized TLL in the evaluated inactivation conditions (60 °C, 25 mM sodium phosphate buffer pH 7). After 5 cycles of oleic acid esterification, only a few percentage of its conversion has reduced. On the other hand, glycidol-activated chitosan derivative showed very low hydrolytic activity value. Epichlorohydrin-activated chitosan derivative showed regular hydrolytic activity value. Both derivatives showed low immobilization yields. Operational stability of this last derivative was very low, where after the first cycle of oleic acid esterification, only 56% of its initial conversion was obtained.

Screening and production of lipase from fungal organisms

Abstract: Lipases (triacylglycerol acylhydrolases, (E.C. 3.1.1.3)) are a class of enzymes endowed with an ability to catalyze the hydrolysis of triglycerides to glycerol and free fatty acids. These are industrially significant, particularly microbial lipases. Among several diverse sources, lipases from fungal origin are much embraced owing to their high stability. These lipases are directly screened majorly by the plate assay technique involving various preferred and specific substrates and indirectly by appropriately growing the strains in liquid medium followed by analysing the activity of the filtrates. Production of fungal lipase is majorly by using solid state and submerged fermentation processes with considerable variation in their operational conditions, that are influenced by physico-chemical factors and which plays a major role in the optimum lipase production. Further, the immobilized fungal cells have also been employed for lipase production using various support materials. Keeping in view of all these aspects, this review focuses on the screening, production and utility of lipases obtained from prominent fungal organisms.

The impact of atmospheric cold plasma treatment on inactivation of lipase and lipoxygenase of wheat germs

Abstract: Wheat germ is a by-product of milling process which contains large amount of nutrients. The shelf life of wheat germ could improve by inactivation of destructive endogenous enzymes especially lipase and lipoxygenase. In this work, the impact of atmospheric cold plasma treatment on the inactivation of lipase and lipoxygenase enzymes of wheat germ was studied. Dielectric barrier discharge plasma was utilized to treat wheat germs. The impact of treatment time and voltage of plasma on the inactivation of lipase and lipoxygenase were investigated as well. The higher voltage and treatment time led to higher inactivation, however, the inactivation of lipase and lipoxygenase was not significant after 25 min treatment time. The DPPH radical scavenging activity and total phenolic of treated samples did not change significantly compared to controlled samples. However lipase and lipoxygenase recovered some of their loss activity during the storage. The recovery of activity was higher for lipase compared to lipoxygenase. According to the overall results, the cold plasma could be introduced as a new potential to stabilize the wheat germ and extending its shelf-life.

Chloropropanols and their esters in cereal products

Abstract: Chloropropanols, in particular monochloropropanediols (MCPDs) are food contaminants that can form in the high temperature crust region of cereal products. Previous studies have indicated that MCPD-esters may be formed from a reaction between chloride ions and some lipids, although, to date, these compounds have not been reported in cereal products. MCPD-esters were extracted into an organic solvent and cleaned up by a preparative thin-layer chromatography procedure. Sample extracts were analysed using gas chromatography/mass spectrometry (GC/MS) and the data compared with that obtained from a reference MCPD-ester, prepared by a custom synthesis. A faster method using enzyme hydrolysis and GC/MS showed that MCPD-esters could also be determined as the amount of 3-MCPD released by a commercial lipase from Aspergillus oryzae. Under the conditions of enzyme hydrolysis, model system studies indicated that low levels of MCPDs might also be generated by a lipase catalysed reaction between short chain triacylglycerols and chloride ions.

Caco-2 Cell Conditions Enabling Studies of Drug Absorption from Digestible Lipid-Based Formulations.

Abstract: To identify conditions allowing the use of cell-based models for studies of drug absorption during in vitro lipolysis of lipid-based formulations (LBFs). Caco-2 was selected as the cell-based model system. Monolayer integrity was evaluated by measuring mannitol permeability after incubating Caco-2 cells in the presence of components available during lipolysis. Pure excipients and formulations representing the lipid formulation classification system (LFCS) were evaluated before and after digestion. Porcine mucin was evaluated for its capacity to protect the cell monolayer. Most undigested formulations were compatible with the cells (II-LC, IIIB-LC, and IV) although some needed mucin to protect against damaging effects (II-MC, IIIB-MC, I-LC, and IIIA-LC). The pancreatic extract commonly used in digestion studies was incompatible with the cells but the Caco-2 monolayers could withstand immobilized recombinant lipase. Upon digestion, long chain formulations caused more damage to Caco-2 cells than their undigested counterparts whereas medium chain formulations showed better tolerability after digestion. Most LBFs and components thereof (undigested and digested) are compatible with Caco-2 cells. Pancreatic enzyme is not tolerated by the cells but immobilized lipase can be used in combination with the cell monolayer. Mucin is beneficial for critical formulations and digestion products.

Effect of the Presence of Surfactants and Immobilization Conditions on Catalysts’ Properties of Rhizomucor miehei Lipase onto Chitosan

Abstract: Lipase from Rhizomucor miehei (RML) was immobilized onto chitosan support in the presence of some surfactants added at low levels using two different strategies. In the first approach, the enzyme was immobilized in the presence of surfactants on chitosan supports previously functionalized with glutaraldehyde. In the second one, after prior enzyme adsorption on chitosan beads in the presence of surfactants, the complex chitosan beads-enzyme was then cross-linked with glutaraldehyde. The effects of surfactant concentrations on the activities of free and immobilized RML were evaluated. Hexadecyltrimethylammonium bromide (CTAB) promoted an inhibition of enzyme activity while the nonionic surfactant Triton X-100 caused a slight increase in the catalytic activity of the free enzyme and the derivatives produced in both methods of immobilization. The best derivatives were achieved when the lipase was firstly adsorbed on chitosan beads at 4 °C for 1 h, 220 rpm followed by cross-link the complex chitosan beads-enzyme with glutaraldehyde 0.6% v.v−1 at pH 7. The derivatives obtained under these conditions showed high catalytic activity and excellent thermal stability at 60° and 37 °C. The best derivative was also evaluated in the synthesis of two flavor esters namely methyl and ethyl butyrate. At non-optimized conditions, the maximum conversion yield for methyl butyrate was 89%, and for ethyl butyrate, the esterification yield was 92%. The results for both esterifications were similar to those obtained when the commercial enzyme Lipozyme® and free enzyme were used in the same reaction conditions and higher than the one achieved in the absence of the selected surfactant.