Liquid metal

About: Liquid metal is a research topic. Over the lifetime, 6947 publications have been published within this topic receiving 77785 citations. The topic is also known as: liquid alloy & liquid metal alloy.

Non-toxic liquid metal composition for use as a mercury substitute

Abstract: Liquid gallium or gallium alloy is utilized as a mercury substitute for a variety of applications. The liquid gallium or gallium alloy is either free of metal oxides or has only very low quantities of metal oxides.

Actively convected liquid metal divertor

Abstract: The use of actively convected liquid metals with j???B force is proposed to facilitate heat handling by the divertor, a challenging issue associated with magnetic fusion experiments such as ITER. This issue will be aggravated even more for DEMO and power reactors because the divertor heat load will be significantly higher and yet the use of copper would not be allowed as the heat sink material. Instead, reduced activation ferritic/martensitic steel alloys with heat conductivities substantially lower than that of copper, will be used as the structural materials. The present proposal is to fill the lower part of the vacuum vessel with liquid metals with relatively low melting points and low chemical activities including Ga and Sn. The divertor modules, equipped with electrodes and cooling tubes, are immersed in the liquid metal. The electrode, placed in the middle of the liquid metal, can be biased positively or negatively with respect to the module. The j???B force due to the current between the electrode and the module provides a rotating motion for the liquid metal around the electrodes. The rise in liquid temperature at the separatrix hit point can be maintained at acceptable levels from the operation point of view. As the rotation speed increases, the current in the liquid metal is expected to decrease due to the v???B electromotive force. This rotating motion in the poloidal plane will reduce the divertor heat load significantly. Another important benefit of the convected liquid metal divertor is the fast recovery from unmitigated disruptions. Also, the liquid metal divertor concept eliminates the erosion problem.

Low temperature synthesis of semiconductor fibers

Abstract: This invention presents a process to produce bulk quantities of nanowires of a variety of semiconductor materials. Large liquid gallium drops are used as sinks for the gas phase solute, generated in-situ facilitated by microwave plasma. To grow silicon nanowires for example, a silicon substrate covered with gallium droplets is exposed to a microwave plasma containing atomic hydrogen. A range of process parameters such as microwave power, pressure, inlet gas phase composition, were used to synthesize silicon nanowires as small as 4 nm (nanometers) in diameter and several micrometers long. As opposed to the present technology, the instant technique does not require creation of quantum sized liquid metal droplets to synthesize nanowires. In addition, it offers advantages such as lower growth temperature, better control over size and size distribution, better control over the composition and purity of the nanowires.

Liquid metal enabled combinatorial heat transfer science: toward unconventional extreme cooling

Abstract: As a class of newly emerging material, liquid metal exhibits many outstanding performances in a wide variety of thermal management areas, such as thermal interface material, heat spreader, convective cooling and phase change material (PCM) for thermal buffering etc. To help mold next generation unconventional cooling technologies and further advance the liquid metal cooling to an ever higher level in tackling more extreme, complex and critical thermal issues and energy utilizations, a novel conceptual scientific category was dedicated here which could be termed as combinatorial liquid metal heat transfer science. Through comprehensive interpretations on a group of representative liquid metal thermal management strategies, the most basic ways were outlined for developing liquid metal enabled combined cooling systems. The main scientific and technical features of the proposed hybrid cooling systems were illustrated. Particularly, five abstractive segments toward constructing the combinatorial liquid metal heat transfer systems were clarified. The most common methods on innovating liquid metal combined cooling systems based on this classification principle were discussed, and their potential utilization forms were proposed. For illustration purpose, several typical examples such as low melting point metal PCM combined cooling systems and liquid metal convection combined cooling systems, etc. were specifically introduced. Finally, future prospects to search for and make full use of the liquid metal combined high performance cooling system were discussed. It is expected that in practical application in the future, more unconventional combination forms on the liquid metal cooling can be obtained from the current fundamental principles.

Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope

Abstract: Experimental and numerical studies of slurry generation using a cooling slope are presented in the paper. The slope having stainless steel body has been designed and constructed to produce semisolid A356 Al alloy slurry. The pouring temperature of molten metal, slope angle of the cooling slope and slope wall temperature were varied during the experiment. A multiphase numerical model, considering liquid metal and air, has been developed to simulate the liquid metal flow along the cooling channel using an Eulerian two-phase flow approach. Solid fraction evolution of the solidifying melt is tracked at different locations of the cooling channel following Schiel’s equation. The continuity, momentum and energy equations are solved considering thin wall boundary condition approach. During solidification of the melt, based on the liquid fraction and latent heat of the alloy, temperature of the alloy is modified continuously by introducing a modified temperature recovery method. Numerical simulations has been carried out for semisolid slurry formation by varying the process parameters such as angle of the cooling slope, cooling slope wall temperature and melt superheat temperature, to understand the effect of process variables on cooling slope semisolid slurry generation process such as temperature distribution, velocity distribution and solid fraction of the solidifying melt. Experimental validation performed for some chosen cases reveals good agreement with the numerical simulations.