Liquid paraffin

About: Liquid paraffin is a research topic. Over the lifetime, 6185 publications have been published within this topic receiving 52956 citations.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using an inorganic particle matrix for small molecule analysis

Abstract: Fine metal or metal oxide powder as an alternative to conventional organic matrices in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) has been utilized successfully for lower molecular mass analytes, poly(ethylene glycol) 200 (PEG 200) and methyl stearate. Eleven kinds of particle, Al, Mn, Mo, Si, Sn, SnO2, TiO2, W, WO3, Zn and ZnO, were evaluated. The analyte was mixed with a metal or metal oxide powder (inorganic matrix) with particle diameter of tens of micrometers and liquid dispersant, followed by application to the sample target. Using a commercial MALDI-TOFMS instrument equipped with an internal 337 nm pulsed nitrogen laser, the analytes, PEG 200 and methyl stearate, were ionized as the alkali metal ion adducted molecules [M+Na]+ or [M+K]+ when the inorganic matrices Mn, Mo, Si, Sn, TiO2, W, WO3, Zn or ZnO were used. In the case of an Al matrix, PEG 200 was ionized as [M+K]+, whereas methyl stearate was ionized as [M+H]+ and [M+Al]+. These particles have potential as the matrix for MALDI. During our examination, however, only SnO2 particles did not ionize either PEG 200 or methyl stearate. Based on our protocol, when TiO2 powder was suspended with liquid paraffin, PEG 200 and methyl stearate gave their MALDI-TOF mass spectra with the lowest background noise and highest intensity. TiO2 powder seemed to be a broad potential matrix for low molecular mass polar or non-polar analytes. The results suggested that bulk particles caused rapid heating/vaporization processes and ionized analyte molecules under irradiation with a pulsed UV laser. The present method can be readily applied to obtain the low background noise MALDI-TOF mass spectra of small-sized compounds.

Micro/nanoscale hierarchical structured ZnO mesh film for separation of water and oil

Abstract: Oil contaminated water is a common problem in the world, thus to effectively separate water and oil is an urgent task for us to resolve. By control of surface wettability of a solid substrate, both superhydrophobicity and superoleophilicity on a film can be realized, which is necessary for water and oil separation. Here we report a stable superhydrophobic and superoleophilic ZnO-coated stainless steel mesh film with special hierarchical micro/nanostructures that can be used to separate a water and oil mixture effectively. Namely, the film is superhydrophobic and water cannot penetrate the mesh film because of the large negative capillary effect, while the film is superoleophilic and liquid paraffin oil can spread out quickly and permeate the mesh film spontaneously due to the capillary effect. A detailed investigation indicates that microscale and nanoscale hierarchical structures and the appropriate size of the microscale mesh pores on the mesh films play an important role in obtaining the excellent water and oil separation property. This work provides an alternative to current separation meshes and is promising in various important applications such as separation and filtration, lab-on-a-chip devices and micro/nanofluidic devices.