Showing papers on "Lysis published in 2014"

Caspase-11 activation requires lysis of pathogen-containing vacuoles by IFN-induced GTPases

Abstract: Lipopolysaccharide from Gram-negative bacteria is sensed in the host cell cytoplasm by a non-canonical inflammasome pathway that ultimately results in caspase-11 activation and cell death. In mouse macrophages, activation of this pathway requires the production of type-I interferons, indicating that interferon-induced genes have a critical role in initiating this pathway. Here we report that a cluster of small interferon-inducible GTPases, the so-called guanylate-binding proteins, is required for the full activity of the non-canonical caspase-11 inflammasome during infections with vacuolar Gram-negative bacteria. We show that guanylate-binding proteins are recruited to intracellular bacterial pathogens and are necessary to induce the lysis of the pathogen-containing vacuole. Lysis of the vacuole releases bacteria into the cytosol, thus allowing the detection of their lipopolysaccharide by a yet unknown lipopolysaccharide sensor. Moreover, recognition of the lysed vacuole by the danger sensor galectin-8 initiates the uptake of bacteria into autophagosomes, which results in a reduction of caspase-11 activation. These results indicate that host-mediated lysis of pathogen-containing vacuoles is an essential immune function and is necessary for efficient recognition of pathogens by inflammasome complexes in the cytosol.

Streptococcus mutans Extracellular DNA Is Upregulated during Growth in Biofilms, Actively Released via Membrane Vesicles, and Influenced by Components of the Protein Secretion Machinery

Abstract: Streptococcus mutans, a major etiological agent of human dental caries, lives primarily on the tooth surface in biofilms. Limited information is available concerning the extracellular DNA (eDNA) as a scaffolding matrix in S. mutans biofilms. This study demonstrates that S. mutans produces eDNA by multiple avenues, including lysis-independent membrane vesicles. Unlike eDNAs from cell lysis that were abundant and mainly concentrated around broken cells or cell debris with floating open ends, eDNAs produced via the lysis-independent pathway appeared scattered but in a structured network under scanning electron microscopy. Compared to eDNA production of planktonic cultures, eDNA production in 5- and 24-h biofilms was increased by >3- and >1.6-fold, respectively. The addition of DNase I to growth medium significantly reduced biofilm formation. In an in vitro adherence assay, added chromosomal DNA alone had a limited effect on S. mutans adherence to saliva-coated hydroxylapatite beads, but in conjunction with glucans synthesized using purified glucosyltransferase B, the adherence was significantly enhanced. Deletion of sortase A, the transpeptidase that covalently couples multiple surface-associated proteins to the cell wall peptidoglycan, significantly reduced eDNA in both planktonic and biofilm cultures. Sortase A deficiency did not have a significant effect on membrane vesicle production; however, the protein profile of the mutant membrane vesicles was significantly altered, including reduction of adhesin P1 and glucan-binding proteins B and C. Relative to the wild type, deficiency of protein secretion and membrane protein insertion machinery components, including Ffh, YidC1, and YidC2, also caused significant reductions in eDNA.

Phosphoinositide-mediated oligomerization of a defensin induces cell lysis.

Abstract: Cationic antimicrobial peptides (CAPs) such as defensins are ubiquitously found innate immune molecules that often exhibit broad activity against microbial pathogens and mammalian tumor cells. Many CAPs act at the plasma membrane of cells leading to membrane destabilization and permeabilization. In this study, we describe a novel cell lysis mechanism for fungal and tumor cells by the plant defensin NaD1 that acts via direct binding to the plasma membrane phospholipid phosphatidylinositol 4,5-bisphosphate (PIP2). We determined the crystal structure of a NaD1:PIP2 complex, revealing a striking oligomeric arrangement comprising seven dimers of NaD1 that cooperatively bind the anionic headgroups of 14 PIP2 molecules through a unique 'cationic grip' configuration. Site-directed mutagenesis of NaD1 confirms that PIP2-mediated oligomerization is important for fungal and tumor cell permeabilization. These observations identify an innate recognition system by NaD1 for direct binding of PIP2 that permeabilizes cells via a novel membrane disrupting mechanism. DOI: http://dx.doi.org/10.7554/eLife.01808.001.

Emerging microfluidic devices for cell lysis: a review

Abstract: Intracellular components containing information about genetic and disease characteristics are key substances to clinical diagnostics. Cell lysis is therefore a crucial step for efficient extraction and the subsequent analysis of intracellular components. With the advent of advanced manufacturing techniques, a number of micro systems have been proposed and applied for manipulating cells on chips. In this paper, we review emerging microfluidic devices for cell lysis. Different lysis mechanisms and related techniques are compared. The technical details, advantages, and limitations of various microfluidic devices are discussed.

Cell death versus cell survival instructed by supramolecular cohesion of nanostructures

Abstract: Many naturally occurring peptides containing cationic and hydrophobic domains have evolved to interact with mammalian cell membranes and have been incorporated into materials for non-viral gene delivery, cancer therapy, or treatment of microbial infections. Their electrostatic attraction to the negatively charged cell surface and hydrophobic interactions with the membrane lipids enable intracellular delivery or cell lysis. While the effects of hydrophobicity and cationic charge of soluble molecules on the cell membrane are well known, the interactions between materials with these molecular features and cells remain poorly understood. Here we report that varying the cohesive forces within nanofibres of supramolecular materials with nearly identical cationic and hydrophobic structure instruct cell death or cell survival. Weak intermolecular bonds promote cell death through disruption of lipid membranes, while materials reinforced by hydrogen bonds support cell viability. These findings provide new strategies to design biomaterials that interact with the cell membrane.

Interaction of silver nanoparticles with Escherichia coli and their cell envelope biomolecules.

Abstract: The antibacterial effect of AgNPs was investigated by determining MIC/MBC and growth kinetics assay The lowest MIC/MBC was found to be in the range of 1125-225 µg ml(-1) The growth kinetics curve shows that 25 µg ml(-1) AgNPs strongly inhibits the bacterial growth Confocal laser scanning electron microscopy (CLSM) shows that as the concentration of NPs increases, reduction in the number of cells was observed and at 50 µg ml(-1) of NPs, 100% death was noticed Scanning electron microscopy (SEM) shows cells were severely damaged with pits, multiple depressions, and indentation on cell surface and original rod shape has swollen into bigger size High resolution-transmission electron microscopic (HR-TEM) micrograph shows that cells were severely ruptured The damaged cells showed either localized or complete separation of the cell membrane The NPs that anchor onto cell surface and penetrating the cells may cause membrane damage, which could result in cell lysis The interaction of AgNPs to membrane biomolecules; lipopolysaccharide (LPS) and L-α-phosphatidyl-ethanolamine (PE) were investigated by attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy LPS and PE showed IR spectral changes after AgNPs exposure The O-antigen part of LPS was responsible for interaction of NPs through hydrogen bonding The phosphodiester bond of PE was broken by AgNPs, forming phosphate monoesters and resulting in the highly disordered alkyl chain The AgNPs-induced structural changes in phospholipid may lead to the loss of amphiphilic properties, destruction of the membrane and cell leaking The biomolecular changes in bacterial cell envelope revealed by ATR-FTIR provide a deeper understanding of cytotoxicity of AgNPs

Kinetics of cell inactivation, toxin release, and degradation during permanganation of Microcystis aeruginosa.

Abstract: Potassium permanganate (KMnO4) preoxidation is capable of enhancing cyanobacteria cell removal. However, the impacts of KMnO4 on cell viability and potential toxin release have not been comprehensively characterized. In this study, the impacts of KMnO4 on Microcystis aeruginosa inactivation and on the release and degradation of intracellular microcystin-LR (MC-LR) and other featured organic matter were investigated. KMnO4 oxidation of M. aeruginosa exhibited some kinetic patterns that were different from standard chemical reactions. Results indicated that cell viability loss and MC-LR release both followed two-segment second-order kinetics with turning points of KMnO4 exposure (ct) at cty and ctr, respectively. KMnO4 primarily reacted with dissolved and cell-bound extracellular organic matter (mucilage) and resulted in a minor loss of cell viability and MC-LR release before the ct value reached cty. Thereafter, KMnO4 approached the inner layer of the cell wall and resulted in a rapid decrease of cell viability. Further increase of ct to ctr led to cell lysis and massive release of intracellular MC-LR. The MC-LR release rate was generally much slower than its degradation rate during permanganation. However, MC-LR continued to be released even after total depletion of KMnO4, which led to a great increase in MC-LR concentration in the treated water.

Effects of monofunctional platinum agents on bacterial growth: a retrospective study.

Abstract: The effect of the novel and potent monofunctional platinum(II) agent phenanthriplatin on Escherichia coli and bacteriophage λ lysogens is reported. E. coli filamentation was observed by light microscopy when cells were grown in the presence of phenanthriplatin, cis-[Pt(NH3)2(Am)Cl]+ where Am is phenanthridine. Treatment of lysogenic bacteria with this compound resulted in lysis and the production of viral particles, as indicated by plaque formation in a bacterial lawn. The results obtained with phenanthriplatin are contextualized by comparison with those obtained using cisplatin as well as other, less active, monofunctional compounds such as [Pt(NH3)3Cl]+ and cis-[Pt(NH3)2(py)Cl]+, where py is pyridine. The ability of phenanthriplatin to induce bacterial filamentation and initiate lysis in lysogenic bacteria corroborates the hypothesis that the biological activity of this complex is mediated by its interaction with DNA.

Scale-up of hydrophobin-assisted recombinant protein production in tobacco BY-2 suspension cells.

Abstract: Plant suspension cell cultures are emerging as an alternative to mammalian cells for production of complex recombinant proteins. Plant cell cultures provide low production cost, intrinsic safety and adherence to current regulations, but low yields and costly purification technology hinder their commercialization. Fungal hydrophobins have been utilized as fusion tags to improve yields and facilitate efficient low-cost purification by surfactant-based aqueous two-phase separation (ATPS) in plant, fungal and insect cells. In this work, we report the utilization of hydrophobin fusion technology in tobacco bright yellow 2 (BY-2) suspension cell platform and the establishment of pilot-scale propagation and downstream processing including first-step purification by ATPS. Green fluorescent protein-hydrophobin fusion (GFP-HFBI) induced the formation of protein bodies in tobacco suspension cells, thus encapsulating the fusion protein into discrete compartments. Cultivation of the BY-2 suspension cells was scaled up in standard stirred tank bioreactors up to 600 L production volume, with no apparent change in growth kinetics. Subsequently, ATPS was applied to selectively capture the GFP-HFBI product from crude cell lysate, resulting in threefold concentration, good purity and up to 60% recovery. The ATPS was scaled up to 20 L volume, without loss off efficiency. This study provides the first proof of concept for large-scale hydrophobin-assisted production of recombinant proteins in tobacco BY-2 cell suspensions.

Antibacterial Compounds of Canadian Honeys Target Bacterial Cell Wall Inducing Phenotype Changes, Growth Inhibition and Cell Lysis That Resemble Action of β-Lactam Antibiotics

Abstract: Honeys show a desirable broad spectrum activity against Gram-positive and negative bacteria making antibacterial activity an intrinsic property of honey and a desirable source for new drug development. The cellular targets and underlying mechanism of action of honey antibacterial compounds remain largely unknown. To facilitate the target discovery, we employed a method of phenotypic profiling by directly comparing morphological changes in Escherichia coli induced by honeys to that of ampicillin, the cell wall-active β-lactam of known mechanism of action. Firstly, we demonstrated the purity of tested honeys from potential β-lactam contaminations using quantitative LC-ESI-MS. Exposure of log-phase E. coli to honey or ampicillin resulted in time- and concentration-dependent changes in bacterial cell shape with the appearance of filamentous phenotypes at sub-inhibitory concentrations and spheroplasts at the MBC. Cell wall destruction by both agents, clearly visible on microscopic micrographs, was accompanied by increased permeability of the lipopolysaccharide outer membrane as indicated by fluorescence-activated cell sorting (FACS). More than 90% E. coli exposed to honey or ampicillin became permeable to propidium iodide. Consistently with the FACS results, both honey-treated and ampicillin-treated E. coli cells released lipopolysaccharide endotoxins at comparable levels, which were significantly higher than controls (p<0.0001). E. coli cells transformed with the ampicillin-resistance gene (β–lactamase) remained sensitive to honey, displayed the same level of cytotoxicity, cell shape changes and endotoxin release as ampicillin-sensitive cells. As expected, β–lactamase protected the host cell from antibacterial action of ampicillin. Thus, both honey and ampicillin induced similar structural changes to the cell wall and LPS and that this ability underlies antibacterial activities of both agents. Since the cell wall is critical for cell growth and survival, honey active compounds would be highly applicable for therapeutic purposes while differences in the mode of action between honey and ampicillin may provide clinical advantage in eradicating β-lactam-resistant pathogens.

On-Chip Separation and Analysis of RNA and DNA from Single Cells

Abstract: The simultaneous analysis of RNA and DNA of single cells remains a challenge as these species have very similar physical and biochemical properties and can cross-contaminate each other. Presented is an on-chip system that enables selective lysing of single living cells, extraction, focusing, and absolute quantification of cytoplasmic RNA mass and its physical separation from DNA in the nucleus using electrical lysing and isotachophoresis (ITP). This absolute quantitation is performed without enzymatic amplification in less than 5 min. The nucleus is preserved, and its DNA fluorescence signal can be measured independently. We demonstrate the technique using single mouse lymphocyte cells, for which we extracted an average of 14.1 pg of total RNA per cell. We also demonstrate correlation analysis between the absolute amount of RNA and relative amount of DNA, showing heterogeneity associated with cell cycles. The technique is compatible with fractionation of DNA and RNA and with downstream assays of each.

Mechanistic investigation of interactions between steroidal saponin digitonin and cell membrane models.

Abstract: Digitonin is an amphiphilic steroidal saponin, a class of natural products that can bind to cholesterol and lyse cells. Despite the known cell membrane lysis activity, it remains unclear how it interacts with cell membranes. In the present work, the interaction mechanism between digitonin and cell membrane models has quantitatively been investigated using a combination of physical techniques. It has been demonstrated that digitonin molecules bind specifically to cholesterol in the membrane, resulting in the formation of cholesterol−digitonin complexes on the membrane surface by removing cholesterol from the membrane core. Changes in the mass density and the film mechanics caused by the digitonin were determined by using quartz crystal microbalance with dissipation (QCM-D), and the combination of X-ray reflectivity (XRR) and dual polarization interferometry (DPI) yielded the hydration level of the cholesterol−digitonin complexes. From differential scanning calorimetry (DSC) analysis, supporting evidence was obtained that cholesterol was removed from the membrane core.

Rapid Analysis of Cell Surface N-Glycosylation from Living Cells Using Mass Spectrometry

Abstract: Cell surfaces are covered with a dense carbohydrate layer referred to as the glycocalyx. Because different cell types express different glycan signatures, it is of paramount importance to have robust methods to analyze the glycome of living cells. To achieve this, a common procedure involves cell lysis and extraction of membrane (glyco)proteins and yields a major proportion of high-mannose N-glycans that most likely stem from intracellular proteins derived from the ER. Using HEK 293 cells as a model system, we developed a reproducible, sensitive, and fast method to profile surface N-glycosylation from living cells. We directly released glycopeptides from cell surfaces through tryptic digestion of freshly harvested and vital cells, thereby improving the detection and quantification of complex-type N-glycans by increasing their relative amount from 14 to 85%. It was also possible to detect 25 additional structures in HEK 293, 48 in AGE1.HN, 42 in CHO-K1, and 51 in Hep G2 cells. The additional signals provided deeper insight into cell-type-specific N-glycan features such as antennarity, fucosylation, and sialylation. Thus, this protocol, which can potentially be applied to any cells, will be useful in the fields of glycobiotechnology and biomarker discovery.

Characterization of biases in phosphopeptide enrichment by Ti(4+)-immobilized metal affinity chromatography and TiO2 using a massive synthetic library and human cell digests.

Abstract: Outcomes of comparative evaluations of enrichment methods for phosphopeptides depend highly on the experimental protocols used, the operator, the source of the affinity matrix, and the samples analyzed. Here, we attempt such a comparative study exploring a very large synthetic library containing thousands of serine, threonine, and tyrosine phosphorylated peptides, being present in roughly equal abundance, along with their nonphosphorylated counterparts, and use an optimized protocol for enrichment by TiO2 and Ti(4+)-immobilized metal affinity chromatography (IMAC) by a single operator. Surprisingly, our data reveal that there are minimal differences between enrichment of phosphopeptides by TiO2 and Ti(4+)-IMAC when considering biochemical and biophysical parameters such as peptide length, sequence surrounding the site, hydrophobicity, and nature of the amino acid phosphorylated. Similar results were obtained when evaluating a tryptic digest of a cellular lysate, representing a more natural source of phosphopeptides. All the data presented are available via ProteomeXchange with the identifier PXD000759.

GENOMIC DNA ISOLATION FROM HUMAN WHOLE BLOOD SAMPLES BY NON ENZYMATIC SALTING OUT METHOD Original Article

Abstract: Introduction: Human DNA can be extracted from all the nucleated cells such as hair, tissue, blood etc. certain sources contain high levels of proteins & many types of secondary metabolites that effects DNA purification, highly purified DNA is essential for molecular studies. Here we followed salting out method to extract large quantities of human DNA from whole blood. Methods: Blood sample was used for extraction of DNA by salting out method. Lysis Buffer contains detergent and salts which create a hypertonic condition resulting in lysis of cells. RBC lysis: by using TKM1 buffer, WBC lysis: by using TKM2 buffer, extraction of DNA & storage: by using SDS, Nacl&Tris EDTA buffer. Results: 1% Agarose gels were used to check the DNA by Gel dock. DNA quantified by using Spectrophotometer, quantity of DNA obtained from 300µl blood is 6 to 10ug/300ul. Conclusion: Using the Non enzymatic (Salting out) method, good quality DNA samples from a human whole blood can be extract that is enough to perform Polymerase chain reaction to study gene polymorphisms in human population.

Antibacterial effect of ultrafine nanodiamond against gram-negative bacteria Escherichia coli

Abstract: We investigate the antibacterial effect of ultrafine nanodiamond particles with an average size of 5 nm against the gram-negative bacteria Escherichia coli (E. coli). UV-visible, Raman spectroscopy, and scanning electron microscopy (SEM) have been employed to elucidate the nature of the interaction. The influence on bacterial growth was monitored by measuring optical densities of E. coli at 600 nm as a function of time in the presence of carboxylated nanodiamond (cND) particles (100 μg/ml ) in highly nutritious liquid Luria-Bertani medium. The SEM images prove that cND particles are attached to the bacterial cell wall surface and some portion of the bacterial cell wall undergoes destruction. Due to the change of the protein structure on the bacterial wall, a small Raman shift in the region of 1400 to 1700 cm⁻¹ was observed when E. coli interacted with cNDs. Raman mapping images show strong evidence of cND attachment at the bacterial cell wall surface. Electrotransformation of E. coli with a fluorescent protein markers experiment demonstrated that the interaction mechanisms are different for E. coli treated with cND particles, E. coli by lysozyme treatment, and E. coli that suffer lysis.

Miltefosine Increases Lipid and Protein Dynamics in Leishmania amazonensis Membranes at Concentrations Similar to Those Needed for Cytotoxicity Activity

Abstract: Miltefosine (MT) is a membrane-active alkylphospholipid licensed for the topical treatment of breast cancer skin metastases and the oral treatment of leishmaniasis, although its mechanism of action remains unclear. Electron paramagnetic resonance (EPR) spectroscopy of a spin-labeled lipid and a thiol-specific spin label in the plasma membrane of Leishmania promastigotes showed that MT causes dramatic increases in membrane dynamics. Although these alterations can be detected using a spin-labeled lipid, our experimental results indicated that MT interacts predominantly with the protein component of the membrane. Cell lysis was also detected by analyzing the supernatants of centrifuged samples for the presence of spin-labeled membrane fragments and cytoplasmic proteins. Using a method for the rapid incorporation of MT into the membrane, these effects were measured immediately after treatment under the same range of MT concentrations that cause cell growth inhibition. Cytotoxicity, estimated via microscopic counting of living and dead cells, indicated ∼70% cell death at the concentration of MT at which EPR spectroscopy detected a significant change in membrane dynamics. After this initial impact on the number of viable parasites, the processes of cell death and growth continued during the first 4 h of incubation. The EPR spectra of spin-labeled membrane-bound proteins were consistent with more expanded and solvent-exposed protein conformations, suggesting a detergent-like action. Thus, MT may form micelle-like structures around polypeptide chains, and proteins with a higher hydrophobicity may induce the penetration of hydrophilic groups of MT into the membrane, causing its rupture.

Specific capture and detection of Staphylococcus aureus with high-affinity modified aptamers to cell surface components

Abstract: Slow off-rate modified aptamer (SOMAmer) reagents were generated to several Staphylococcus aureus cell surface-associated proteins via SELEX with multiple modified DNA libraries using purified recombinant or native proteins. High-affinity binding agents with sub-nanomolar Kd's were obtained for staphylococcal protein A (SpA), clumping factors (ClfA, ClfB), fibronectin-binding proteins (FnbA, FnbB) and iron-regulated surface determinants (Isd). Further screening revealed several SOMAmers that specifically bound to Staph. aureus cells from all strains that were tested, but not to other staphylococci or other bacteria. SpA and ClfA SOMAmers proved useful for the selective capture and enrichment of Staph. aureus cells, as shown by culture and PCR, leading to improved limits of detection and efficient removal of PCR inhibitors. Detection of Staph. aureus cells was enhanced by several orders of magnitude when the bacterial cell surface was coated with SOMAmers followed by qPCR of the SOMAmers. Furthermore, fluorescence-labelled SpA SOMAmers demonstrated their utility as direct detection agents in flow cytometry. Significance and Impact of the Study Monitoring for microbial contamination of food, water, nonsterile products or the environment is typically based on culture, PCR or antibodies. Aptamers that bind with high specificity and affinity to well-conserved cell surface epitopes represent a promising novel type of reagents to detect bacterial cells without the need for culture or cell lysis, including for the capture and enrichment of bacteria present at low cell densities and for the direct detection via qPCR or fluorescent staining.

Evidence that pulsed electric field treatment enhances the cell wall porosity of yeast cells.

Abstract: The application of rectangular electric pulses, with 0.1-2 ms duration and field intensity of 2.5-4.5 kV/cm, to yeast suspension mediates liberation of cytoplasmic proteins without cell lysis. The aim of this study was to evaluate the effect of pulsed electric field with similar parameters on cell wall porosity of different yeast species. We found that electrically treated cells become more susceptible to lyticase digestion. In dependence on the strain and the electrical conditions, cell lysis was obtained at 2-8 times lower enzyme concentration in comparison with control untreated cells. The increase of the maximal lysis rate was between two and nine times. Furthermore, when applied at low concentration (1 U/ml), the lyticase enhanced the rate of protein liberation from electropermeabilized cells without provoking cell lysis. Significant differences in the cell surface of control and electrically treated cells were revealed by scanning electron microscopy. Data presented in this study allow us to conclude that electric field pulses provoke not only plasma membrane permeabilization, but also changes in the cell wall structure, leading to increased wall porosity.

Comparison of Methods for Isolation of Bacterial and Fungal DNA from Human Blood

Abstract: The study aimed at optimization of DNA isolation from blood of representatives of four microbial groups causing sepsis, i.e., Gram negative: Escherichia coli, Gram positive: Staphylococcus aureus, yeast: Candida albicans, and filamentous fungus: Aspergillus fumigatus. Additionally, the five commercial kits for microbial DNA isolation from the blood were tested. The developed procedure of DNA isolation consisted of three consecutive steps, i.e., mechanical disruption, chemical lysis, and thermal lysis. Afterward, DNA was isolated from the previously prepared samples (erythrocyte lysis) with the use of five commercial kits for DNA isolation. They were compared paying heed to detection limit, concentration, DNA purity, and heme concentration in samples. The isolation of DNA without preliminary erythrocyte lysis resulted in far higher heme concentration than when lysis was applied. In the variant with erythrocyte lysis, two of the commercial kits were most effective in purifying the DNA extract from heme. Designed procedure allowed obtaining microbial DNA from all four groups of pathogens under study in the amount sufficient to conduct the rtPCR reaction, which aimed at detecting them in the blood.

A Lallzyme MMX-based rapid method for fission yeast protoplast preparation

Abstract: Fungal cells including yeasts are surrounded by cell wall that counteracts turgor pressure and prevents cell lysis. Many yeast experiments, including genetic manipulation of sterile strains, morphogenesis studies, nucleic acid isolation and many others, require mechanical breakage or enzymatic removal of the cell wall. Some of these experiments require the generation of live cells lacking cell walls, called protoplasts, that can be maintained in osmostabilized medium. Enzymatic digestion of cell wall proteoglycans is a commonly used method of protoplast preparation. Currently existing protocols for fission yeast cell wall digestion are time consuming and not very efficient. We developed a new rapid method for fission yeast protoplast preparation that relies on digesting cell walls with Lallzyme MMX commercial enzyme mix, which produces protoplasts from all cells in less than 10 min. We demonstrate that these protoplasts can be utilized in three commonly used fission yeast protocols. Thus, we provide the fission yeast community with a robust and efficient plasmid extraction method, a new protocol for diploid generation and an assay for protoplast recovery that should be useful for studies of morphogenesis. Our method is potentially applicable to other yeasts and fungi. Copyright © 2013 John Wiley & Sons, Ltd.

Deleting multiple lytic genes enhances biomass yield and production of recombinant proteins by Bacillus subtilis

Abstract: Bacillus subtilis is widely used in agriculture and industrial biotechnology; however, cell autolysis significantly decreases its yield in liquid cultures. Numerous factors mediate the lysis of B. subtilis, such as cannibalism factors, prophages, and peptidoglycan (PG) hydrolases. The aim of this work was to use molecular genetic techniques to develop a new strategy to prevent cell lysis and enhance biomass as well as the production of recombinant proteins. Five genes or genetic elements representing three different functional categories were studied as follows: lytC encoding PG hydrolases, the prophage genes xpf and yqxG-yqxH-cwlA (yGlA), and skfA and sdpC that encode cannibalism factors. Cell lysis was reduced and biomass was enhanced by deleting individually skfA, sdpC, xpf, and lytC. We constructed the multiple deletion mutant LM2531 (skfA sdpC lytC xpf) and found that after 4 h of culture, its biomass yield was significantly increased compared with that of prototypical B. subtilis 168 (wild-type) strain and that 15% and 92% of the cells were lysed in cultures of LM2531 and wild-type, respectively. Moreover, two expression vectors were constructed for producing recombinant proteins (β-galactosidase and nattokinase) under the control of the P43 promoter. Cultures of LM2531 and wild-type transformants produced 13741 U/ml and 7991 U/ml of intracellular β-galactosidase, respectively (1.72-fold increase). Further, the level of secreted nattokinase produced by strain LM2531 increased by 2.6-fold compared with wild-type (5226 IU/ml vs. 2028 IU/ml, respectively). Our novel, systematic multigene deletion approach designed to inhibit cell lysis significantly increased the biomass yield and the production of recombinant proteins by B. subtili s. These findings show promise for guiding efforts to manipulate the genomes of other B. subtilis strains that are used for industrial purposes.

All-in-One Nanowire-Decorated Multifunctional Membrane for Rapid Cell Lysis and Direct DNA Isolation

Abstract: This paper describes a handheld device that uses an all-in-one membrane for continuous mechanical cell lysis and rapid DNA isolation without the assistance of power sources, lysis reagents, and routine centrifugation. This nanowire-decorated multifunctional membrane was fabricated to isolate DNA by selective adsorption to silica surface immediately after disruption of nucleus membranes by ultrasharp tips of nanowires for a rapid cell lysis, and it can be directly assembled with commercial syringe filter holders. The membrane was fabricated by photoelectrochemical etching to create microchannel arrays followed by hydrothermal synthesis of nanowires and deposition of silica. The proposed membrane successfully purifies high-quality DNA within 5 min, whereas a commercial purification kit needs more than an hour.

Lysis dynamics and membrane oligomerization pathways for Cytolysin A (ClyA) pore-forming toxin

Abstract: Pore-forming toxins are known for their ability to efficiently form transmembrane pores which eventually leads to cell lysis. The dynamics of lysis and underlying self-assembly or oligomerization pathways leading to pore formation are incompletely understood. In this manuscript the pore-forming kinetics and lysis dynamics of Cytolysin-A (ClyA) toxins on red blood cells (RBCs) are quantified and compared with experimental lysis data. Lysis experiments are carried out on a fixed mass of RBCs, under isotonic conditions in phosphate-buffered saline, for different initial toxin concentrations ranging from 2.94-14.7 nM. Kinetic models which account for monomer binding, conformation and oligomerization to form the dodecameric ClyA pore complex are developed and lysis is assumed to occur when the number of pores per RBC (n(p)) exceeds a critical number, n(pc). By analysing the model in a sublytic regime (n(p) < n(pc)) the number of pores per RBC to initiate lysis is found to lie between 392 and 768 for the sequential oligomerization mechanism and between 5300 and 6300 for the non-sequential mechanism. Rupture rates which are first order in the number of RBCs are seen to provide the best agreement with the lysis experiments. The time constants for pore formation are estimated to lie between 1 and 20 s and monomer conformation time scales were found to be 2-4 times greater than the oligomerization times. Cell rupture takes places in 100s of seconds, and occurs predominantly with a steady number of pores ranging from 515 to 11 000 on the RBC surface for the sequential mechanism. Both the sequential irreversible and non-sequential kinetics provide similar predictions of the hemoglobin release dynamics, however the hemoglobin released as a function of the toxin concentration was accurately captured only with the sequential model. Each mechanism develops a distinct distribution of mers on the surface, providing a unique experimentally observable fingerprint to identify the underlying oligomerization pathways. Our study offers a method to quantify the extent and dynamics of lysis which is an important aspect of developing novel drug and gene delivery strategies based on pore-forming toxins.

Effect of dilution, temperature and pH on the lysis activity of t4 phage against E.coli BL21

Abstract: The effect of various “range” of dilution, temperature and pH on T4 bacteriophage lytic activity against Escherichia coli had been characterized. Results showed that T4 bacteriophage did lysis from 10-1 to 10-7 dilutions, while no lysis at dilutions 10-8 to 10-10. The yield of T4 bacteriophage is highly dependent upon temperature. Low temperatures of 4°C did not permit T4 bacteriophage to perform lysis on host. While at 15°C, 25°C and 30°C there has been lysis but with little delay. Similarly at thermophilic temperature 41°C T4 bacteriophage developed and performed lysis on its host but at temperature regimes of 45°C, 55°C and 70°C, the T4 bacteriophage was completely inactive. The ideal temperature for T4 bacteriolytic activity was 37°C. pH of media was also found affecting virus survival indirectly by influencing extent of virus adsorption to other particles and surfaces and T4 bacteriophage was stable in pH range from 4 to 10. Our study demonstrates that apart from ideal values of respective parameters previously been demonstrated, the lytic activity of T4 bacteriophage is maximal at various other values of temperature, pH and dilution, which can broaden the spectrum of application of phage therapy.

Improved Yield of High Molecular Weight DNA Coincides with Increased Microbial Diversity Access from Iron Oxide Cemented Sub-Surface Clay Environments

Abstract: Despite over three decades of progress, extraction of high molecular weight (HMW) DNA from high clay soils or iron oxide cemented clay has remained challenging. HMW DNA is desirable for next generation sequencing as it yields the most comprehensive coverage. Several DNA extraction procedures were compared from samples that exhibit strong nucleic acid adsorption. pH manipulation or use of alternative ion solutions offered no improvement in nucleic acid recovery. Lysis by liquid N2 grinding in concentrated guanidine followed by concentrated sodium phosphate extraction supported HMW DNA recovery from clays high in iron oxides. DNA recovered using 1 M sodium phosphate buffer (PB) as a competitive desorptive wash was 15.22±2.33 µg DNA/g clay, with most DNA consisting of >20 Kb fragments, compared to 2.46±0.25 µg DNA/g clay with the Powerlyzer system (MoBio). Increasing PB concentration in the lysis reagent coincided with increasing DNA fragment length during initial extraction. Rarefaction plots of 16S rRNA (V1–V3 region) pyrosequencing from A-horizon and clay soils showed an ∼80% and ∼400% larger accessed diversity compared to the Powerlyzer soil DNA system, respectively. The observed diversity from the Firmicutes showed the strongest increase with >3-fold more operational taxonomic units (OTU) recovered.