Maximum power point tracking

About: Maximum power point tracking is a research topic. Over the lifetime, 29012 publications have been published within this topic receiving 484836 citations. The topic is also known as: MPPT & MPP.

Harmonic interaction between a large number of distributed power inverters and the distribution network

Abstract: Power quality problems associated with distributed power (DP) inverters, implemented in large numbers onto the same distribution network, are investigated. Currently, these power quality problems are mainly found in projects with large penetration of photovoltaics (PV) on rooftops of houses and commercial buildings. The main object of this paper is to analyze the observed phenomena of harmonic interference of large populations of these inverters and to compare the network interaction of different inverter topologies and control options. These power quality phenomenons are investigated by using extensive laboratory experiments, as well as computer modeling of different inverter topologies. A complete network simulation study on an existing residential network with large penetration of PVs, is included.

High-Performance Adaptive Perturb and Observe MPPT Technique for Photovoltaic-Based Microgrids

Abstract: Solar photovoltaic (PV) energy has witnessed double-digit growth in the past decade. The penetration of PV systems as distributed generators in low-voltage grids has also seen significant attention. In addition, the need for higher overall grid efficiency and reliability has boosted the interest in the microgrid concept. High-efficiency PV-based microgrids require maximum power point tracking (MPPT) controllers to maximize the harvested energy due to the nonlinearity in PV module characteristics. Perturb and observe (PO second, no steady-state oscillations around the MPP; and lastly, no need for predefined system-dependent constants, hence provides a generic design core. A design example is presented by experimental implementation of the proposed technique. Practical results for the implemented setup at different irradiance levels are illustrated to validate the proposed technique.

An Overview of Recent Research and Emerging PV Converter Technology

Abstract: Photovoltaic (PV) energy has grown at an average annual rate of 60% in the last five years, surpassing one third of the cumulative wind energy installed capacity, and is quickly becoming an important part of the energy mix in some regions and power systems. This has been driven by a reduction in the cost of PV modules. This growth has also triggered the evolution of classic PV power converters from conventional singlephase grid-tied inverters to more complex topologies to increase efficiency, power extraction from the modules, and reliability without impacting the cost. This article presents an overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems. In addition, the recent research and emerging PV converter technology are discussed, highlighting their possible advantages compared with the present technology. Solar PV energy conversion systems have had a huge growth from an accumulative total power equal to approximately 1.2 GW in 1992 to 136 GW in 2013 (36 GW during 2013) [1]. This phenomenon has been possible because of several factors all working together to push the PV energy to cope with one important position today (and potentially a fundamental position in the near future). Among these factors are the cost reduction and increase in efficiency of the PV modules, the search for alternative clean energy sources (not based on fossil fuels), increased environmental awareness, and favorable political regulations from local governments (establishing feed-in tariffs designed to accelerate investment in renewable energy technologies). It has become usual to see PV systems installed on the roofs of houses or PV farms next to the roads in the countryside. Grid-connected PV systems account for more than 99% of the PV installed capacity compared to

Grid-Connected Photovoltaic Systems: An Overview of Recent Research and Emerging PV Converter Technology

Abstract: Photovoltaic (PV) energy has grown at an average annual rate of 60% in the last five years, surpassing one third of the cumulative wind energy installed capacity, and is quickly becoming an important part of the energy mix in some regions and power systems. This has been driven by a reduction in the cost of PV modules. This growth has also triggered the evolution of classic PV power converters from conventional single-phase grid-tied inverters to more complex topologies to increase efficiency, power extraction from the modules, and reliability without impacting the cost. This article presents an overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems. In addition, the recent research and emerging PV converter technology are discussed, highlighting their possible advantages compared with the present technology.

Closure on "Theoretical and experimental analyses of photovoltaic systems with voltage and current-based maximum power point tracking"

Abstract: Detailed theoretical and experimental analyses are presented for the comparison of two simple fast and reliable maximum power point tracking (MPPT) techniques for photovoltaic systems (PV): the voltage-based (VMPPT) and the current-based (CMPPT) approaches. A microprocessor-controlled tracker capable of online voltage and current measurements and programmed with both VMPPT and CMPPT algorithms is constructed. The load of the solar system is either a water pump or a resistance. Simulink facilities are used for simulation and modeling of the novel trackers. The main advantage of this new MPPT, as compared with present trackers, is the elimination of reference (dummy) cells, which results in a more efficient, less expensive, and more reliable PV system.