Showing papers on "Membrane published in 2009"

Porous Graphene as the Ultimate Membrane for Gas Separation

Abstract: We investigate the permeability and selectivity of graphene sheets with designed subnanometer pores using first principles density functional theory calculations. We find high selectivity on the order of 10(8) for H(2)/CH(4) with a high H(2) permeance for a nitrogen-functionalized pore. We find extremely high selectivity on the order of 10(23) for H(2)/CH(4) for an all-hydrogen passivated pore whose small width (at 2.5 A) presents a formidable barrier (1.6 eV) for CH(4) but easily surmountable for H(2) (0.22 eV). These results suggest that these pores are far superior to traditional polymer and silica membranes, where bulk solubility and diffusivity dominate the transport of gas molecules through the material. Recent experimental investigations, using either electron beams or bottom-up synthesis to create pores in graphene, suggest that it may be possible to employ such techniques to engineer variable-sized, graphene nanopores to tune selectivity and molecular diffusivity. Hence, we propose using porous graphene sheets as one-atom-thin, highly efficient, and highly selective membranes for gas separation. Such a pore could have widespread impact on numerous energy and technological applications; including carbon sequestration, fuel cells, and gas sensors.

A new method for water desalination using microbial desalination cells.

Abstract: Current water desalination techniques are energy intensive and some use membranes operated at high pressures. It is shown here that water desalination can be accomplished without electrical energy input or high water pressure by using a source of organic matter as the fuel to desalinate water. A microbial fuel cell was modified by placing two membranes between the anode and cathode, creating a middle chamber for water desalination between the membranes. An anion exchange membrane was placed adjacent to the anode, and a cation exchange membrane was positioned next to the cathode. When current was produced by bacteria on the anode, ionic species in the middle chamber were transferred into the two electrode chambers, desalinating the water in the middle chamber. Proof-of-concept experiments for this approach, using what we call a microbial desalination cell (MDC), was demonstrated using water at different initial salt concentrations (5, 20, and 35 g/L) with acetate used as the substrate for the bacteria. The...

High yield preparation of macroscopic graphene oxide membranes

Abstract: Disclosed are graphene oxide membrane materials of high surface area, which membranes suitably have a surface area of above about 200 μm and exhibit electrical conductivity in excess of about 200 S/m. Also provided are methods of synthesizing such membranes, as well as devices and sensors that incorporate these novel grapheme materials.

"Twin copper source" growth of metal-organic framework membrane: Cu(3)(BTC)(2) with high permeability and selectivity for recycling H(2).

Abstract: In this communication, the copper net supported Cu(3)(BTC)(2) membranes have been successfully synthesized by means of a "twin copper source" technique. Separation studies on gaseous mixtures (H(2)/CO(2), H(2)/CH(4), and H(2)/N(2)) using the membrane revealed that the membrane possesses high permeability and selectivity for H(2) over CO(2), N(2), and CH(4). Compared with the conventional zeolite membranes, the copper net supported Cu(3)(BTC)(2) membrane exhibited high permeation flux in gas separation. Such highly efficient copper net supported Cu(3)(BTC)(2) membranes could be used to separate, recycle, and reuse H(2) exhausted from steam reforming natural gas.

Selective sputtering and atomic resolution imaging of atomically thin boron nitride membranes.

Abstract: We report on the preparation, atomic resolution imaging, and element selective damage mechanism in atomically thin boron nitride membranes. Flakes of less than 10 layers are prepared by mechanical cleavage and are thinned down to single layers in a high-energy electron beam. At our beam energies, we observe a highly selective sputtering of only one of the elements and predominantly at the exit surface of the specimen, and then subsequent removal of atoms next to a defect. Triangle-shaped holes appear in accordance with the crystallographic orientation of each layer. Defects are compared to those observed in graphene membranes. The observation of clean single-layer membranes shows that hexagonal boron nitride is a further material (in addition to graphene) that can exist in a quasi-two-dimensional allotrope without the need for a substrate.

Membrane proteins solubilized intact in lipid containing nanoparticles bounded by styrene maleic acid copolymer.

Abstract: One-third of eukaryotic proteins are integrated within membranes, as are the targets of 40% of approved drugs. However, the lack of a general means of solubilizing, stabilizing and structurally characterizing active membrane proteins has frustrated efforts to understand their mechanisms and exploit their potential value. Here we report that bilayer disks formed by phospholipids and styrene maleic anhydride copolymer preserve the functional and structural integrity of alpha-helical and beta-barrel transmembrane proteins. They form 11 nm particles that are monodispersed, biocompatible, thermostable, and water-soluble, allowing diverse membrane proteins to be simply and rapidly presented for virtually any in vitro analysis.

Solute Coupled Diffusion in Osmotically Driven Membrane Processes

Abstract: Forward osmosis (FO) is an emerging water treatment technology with potential applications in desalination and wastewater reclamation. In FO, water is extracted from a feed solution using the high osmotic pressure of a hypertonic solution that flows on the opposite side of a semipermeable membrane; however, solutes diffuse simultaneously through the membrane in both directions and may jeopardize the process. In this study, we have comprehensively explored the effects of different operating conditions on the forward diffusion of solutes commonly found in brackish water and seawater, and reverse diffusion of common draw solution solutes. Results show that reverse transport of solutes through commercially available FO membranes range between 80 mg to nearly 3,000 mg per liter of water produced. Divalent feed solutes have low permeation rates (less than 1 mmol/m2-hr) while monovalent ions and uncharged solutes exhibit higher permeation. Findings have significant implications on the performance and sustainabil...

Synthesis and Characterization of Poly(phenylene)-Based Anion Exchange Membranes for Alkaline Fuel Cells

Abstract: Cationic polymer membranes that conduct free anions comprise an enabling area of research for alkaline membrane fuel cells and other solid-state electrochemical devices that operate at high pH. The synthesis of anion exchange membranes based on a poly(phenylene) backbone prepared by a Diels−Alder reaction is demonstrated. The poly(phenylene)s have benzylic methyl groups that are converted to bromomethyl groups by a radical reaction. Cationic polymers result from conversion of the bromomethyl groups to ionic moieties by quaternization with trimethylamine in the solid state. The conversion to benzyltrimethylammonium groups is incomplete as evidenced by the differences between the IEC values measured by titration and the theoretical IECs based on 1H NMR measurements. The anion exchange membranes formed from these polymers have hydroxide ion conductivities as high as 50 mS/cm in liquid water, and they are stable under highly basic conditions at elevated temperatures.

Influence of Zeolite Crystal Size on Zeolite-Polyamide Thin Film Nanocomposite Membranes

Abstract: Zeolite-polyamide thin film nanocomposite membranes were coated onto polysulfone ultrafiltration membranes by interfacial polymerization of amine and acid chloride monomers in the presence of Linde type A zeolite nanocrystals. A matrix of three different interfacial polymerization chemistries and three different-sized zeolite crystals produced nanocomposite thin films with widely varying structure, morphology, charge, hydrophilicity, and separation performance (evaluated as reverse osmosis membranes). Pure polyamide film properties were tuned by changing polymerization chemistry, but addition of zeolite nanoparticles produced even greater changes in separation performance, surface chemistry, and film morphology. For fixed polymer chemistry, addition of zeolite nanoparticles formed more permeable, negatively charged, and thicker polyamide films. Smaller zeolites produced greater permeability enhancements, but larger zeolites produced more favorable surface properties; hence, nanoparticle size may be considered an additional "degree of freedom" in designing thin film nanocomposite reverse osmosis membranes. The data presented offer additional support for the hypothesis that zeolite crystals alter polyamide thin film structure when they are present during the interfacial polymerization reaction.

Chemical Modification of Polyethersulfone Nanofiltration Membranes: A Review

Abstract: Polysulfone (PS) and poly(ether)sulfone (PES) are often used for synthesis of nanofiltration membranes, due to their chemical, thermal, and mechanical stability. The disadvantage for applying PS/PES is their high hydrophobicity, which increases membrane fouling. To optimize the performance of PS/PES nanofiltration membranes, membranes can be modified. An increase in membrane hydrophilicity is a good method to improve membrane performance. This article reviews chemical (and physicochemical) modification methods applied to increase the hydrophilicity of PS/PES nanofiltration membranes. Modification of poly(ether)sulfone membranes in view of increasing hydrophilicity can be carried out in several ways. Physical or chemical membrane modification processes after formation of the membrane create more hydrophilic surfaces. Such modification processes are (1) graft polymerization that chemically attaches hydrophilic monomers to the membrane surface; (2) plasma treatment, that introduces different functional groups to the membrane surface; and (3) physical preadsorption of hydrophilic components to the membrane surface. Surfactant modification, self-assembly of hydrophilic nanoparticles and membrane nitrification are also such membrane modification processes. Another approach is based on modification of polymers before membrane formation. This bulk modification implies the modification of membrane materials before membrane synthesis of the incorporation of hydrophilic additives in the membrane matrix during membrane synthesis. Sulfonation, carboxylation, and nitration are such techniques. To conclude, polymer blending also results in membranes with improved surface characteristics. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009