Showing papers on "Membrane published in 2020"

Effective ion sieving with Ti 3 C 2 T x MXene membranes for production of drinking water from seawater

Abstract: Traditional ways of producing drinking water from groundwater, water recycling and water conservation are not sufficient. Seawater desalination would close the gap but the main technology used is thermally driven multi-flash distillation, which is energy consuming and not sustainable. Stacking two-dimensional (2D) nanomaterials into lamellar membranes is a promising technique in the pursuit of both high selectivity and permeance in water desalination. However, 2D membranes tend to swell in water, and increasing their stability in aqueous solution is still challenging. Here, we report non-swelling, MXene membranes prepared by the intercalation of Al3+ ions. Swelling is prevented by strong interactions between Al3+ and oxygen functional groups terminating at the MXene surface. These membranes show excellent non-swelling stability in aqueous solutions up to 400 h and possess high rejection of NaCl (~89.5–99.6%) with fast water fluxes (~1.1–8.5 l m−2 h−1). Such membranes can be easily fabricated by simple filtration and ion-intercalating methods, which holds promise for their scalability. Two-dimensional lamellar membranes for water purification are promising but suffer from swelling that reduces their ion sieving performance in water. This study reports easy-to-fabricate, non-swelling MXene membranes prepared by the intercalation of Al3+ ions that could be scalable.

Polyamide nanofiltration membrane with highly uniform sub-nanometre pores for sub-1 Å precision separation.

Abstract: Separating molecules or ions with sub-Angstrom scale precision is important but technically challenging. Achieving such a precise separation using membranes requires Angstrom scale pores with a high level of pore size uniformity. Herein, we demonstrate that precise solute-solute separation can be achieved using polyamide membranes formed via surfactant-assembly regulated interfacial polymerization (SARIP). The dynamic, self-assembled network of surfactants facilitates faster and more homogeneous diffusion of amine monomers across the water/hexane interface during interfacial polymerization, thereby forming a polyamide active layer with more uniform sub-nanometre pores compared to those formed via conventional interfacial polymerization. The polyamide membrane formed by SARIP exhibits highly size-dependent sieving of solutes, yielding a step-wise transition from low rejection to near-perfect rejection over a solute size range smaller than half Angstrom. SARIP represents an approach for the scalable fabrication of ultra-selective membranes with uniform nanopores for precise separation of ions and small solutes. Separating molecules or ions with sub-Angstrom scale precision is important but technically challenging. Here, the authors demonstrate that precise solute-solute separation can be achieved using polyamide membranes formed via surfactant-assembly regulated interfacial polymerization.

Towards single-species selectivity of membranes with subnanometre pores

Abstract: Synthetic membranes with pores at the subnanometre scale are at the core of processes for separating solutes from water, such as water purification and desalination. While these membrane processes have achieved substantial industrial success, the capability of state-of-the-art membranes to selectively separate a single solute from a mixture of solutes is limited. Such high-precision separation would enable fit-for-purpose treatment, improving the sustainability of current water-treatment processes and opening doors for new applications of membrane technologies. Herein, we introduce the challenges of state-of-the-art membranes with subnanometre pores to achieve high selectivity between solutes. We then analyse experimental and theoretical literature to discuss the molecular-level mechanisms that contribute to energy barriers for solute transport through subnanometre pores. We conclude by providing principles and guidelines for designing next-generation single-species selective membranes that are inspired by ion-selective biological channels.

Carbon dioxide electroreduction on single-atom nickel decorated carbon membranes with industry compatible current densities

Abstract: Carbon dioxide electroreduction provides a useful source of carbon monoxide, but comparatively few catalysts could be sustained at current densities of industry level. Herein, we construct a high-yield, flexible and self-supported single-atom nickel-decorated porous carbon membrane catalyst. This membrane possesses interconnected nanofibers and hierarchical pores, affording abundant effective nickel single atoms that participate in carbon dioxide reduction. Moreover, the excellent mechanical strength and well-distributed nickel atoms of this membrane combines gas-diffusion and catalyst layers into one architecture. This integrated membrane could be directly used as a gas diffusion electrode to establish an extremely stable three-phase interface for high-performance carbon dioxide electroreduction, producing carbon monoxide with a 308.4 mA cm−2 partial current density and 88% Faradaic efficiency for up to 120 h. We hope this work will provide guidance for the design and application of carbon dioxide electro-catalysts at the potential industrial scale. Here the authors deploy Ni single atom-decorated carbon membranes as integrated gas diffusion electrodes to construct an extremely stable three-phase interface for CO2 electroreduction, producing CO with a partial current density of 308.4 mA cm–2 and a Faradaic efficiency of 88% for up to 120 h.

A Critical Review on Thin-Film Nanocomposite Membranes with Interlayered Structure: Mechanisms, Recent Developments, and Environmental Applications

Abstract: The separation properties of polyamide reverse osmosis and nanofiltration membranes, widely applied for desalination and water reuse, are constrained by the permeability-selectivity upper bound. Although thin-film nanocomposite (TFN) membranes incorporating nanomaterials exhibit enhanced water permeance, their rejection is only moderately improved or even impaired due to agglomeration of nanomaterials and formation of defects. A novel type of TFN membranes featuring an interlayer of nanomaterials (TFNi) has emerged in recent years. These novel TFNi membranes show extraordinary improvement in water flux (e.g., up to an order of magnitude enhancement) along with better selectivity. Such enhancements can be achieved by a wide selection of nanomaterials, ranging from nanoparticles, one-/two-dimensional materials, to interfacial coatings. The use of nanostructured interlayers not only improves the formation of polyamide rejection layers but also provides an optimized water transport path, which enables TFNi membranes to potentially overcome the longstanding trade-off between membrane permeability and selectivity. Furthermore, TFNi membranes can potentially enhance the removal of heavy metals and micropollutants, which is critical for many environmental applications. This review critically examines the recent developments of TFNi membranes and discusses the underlying mechanisms and design criteria. Their potential environmental applications are also highlighted.

Ultrathin Two-Dimensional Membranes Assembled by Ionic Covalent Organic Nanosheets with Reduced Apertures for Gas Separation

Abstract: Covalent organic frameworks (COFs) are a promising category of porous materials possessing extensive chemical tunability, high porosity, ordered arrangements at a molecular level, and considerable chemical stability. Despite these advantages, the application of COFs as membrane materials for gas separation is limited by their relatively large pore apertures (typically >0.5 nm), which exceed the sieving requirements for most gases whose kinetic diameters are less than 0.4 nm. Herein, we report the fabrication of ultrathin two-dimensional (2D) membranes through layer-by-layer (LbL) assembly of two kinds of ionic covalent organic nanosheets (iCONs) with different pore sizes and opposite charges. Because of the staggered packing of iCONs with strong electrostatic interactions, the resultant membranes exhibit features of reduced aperture size, optimized stacking pattern, and compact dense structure without sacrificing thickness control, which are suitable for molecular sieving gas separation. One of the hybrid membranes, TpEBr@TpPa-SO3Na with a thickness of 41 nm, shows a H2 permeance of 2566 gas permeation units (GPUs) and a H2/CO2 separation factor of 22.6 at 423 K, surpassing the recent Robeson upper bound along with long-term hydrothermal stability. This strategy provides not only a high-performance H2 separation membrane candidate but also an inspiration for pore engineering of COF or 2D porous polymer membranes.

A MOF Glass Membrane for Gas Separation

Abstract: Metal-organic framework (MOF) glasses are promising candidates for membrane fabrication due to their significant porosity, the ease of processing, and most notably, the potential to eliminate the grain boundary that is unavoidable for polycrystalline MOF membranes. Herein, we developed a ZIF-62 MOF glass membrane and exploited its intrinsic gas-separation properties. The MOF glass membrane was fabricated by melt-quenching treatment of an in situ solvothermally synthesized polycrystalline ZIF-62 MOF membrane on a porous ceramic alumina support. The molten ZIF-62 phase penetrated into the nanopores of the support and eliminated the formation of intercrystalline defects in the resultant glass membrane. The molecular sieving ability of the MOF membrane is remarkably enhanced via vitrification. The separation factors of the MOF glass membrane for H2 /CH4 , CO2 /N2 and CO2 /CH4 mixtures are 50.7, 34.5, and 36.6, respectively, far exceeding the Robeson upper bounds.

Hydrophilic microporous membranes for selective ion separation and flow-battery energy storage

Abstract: Membranes with fast and selective ion transport are widely used for water purification and devices for energy conversion and storage including fuel cells, redox flow batteries and electrochemical reactors. However, it remains challenging to design cost-effective, easily processed ion-conductive membranes with well-defined pore architectures. Here, we report a new approach to designing membranes with narrow molecular-sized channels and hydrophilic functionality that enable fast transport of salt ions and high size-exclusion selectivity towards small organic molecules. These membranes, based on polymers of intrinsic microporosity containing Troger’s base or amidoxime groups, demonstrate that exquisite control over subnanometre pore structure, the introduction of hydrophilic functional groups and thickness control all play important roles in achieving fast ion transport combined with high molecular selectivity. These membranes enable aqueous organic flow batteries with high energy efficiency and high capacity retention, suggesting their utility for a variety of energy-related devices and water purification processes. Ion-selective membranes are widely used for water purification and electrochemical energy devices but designing their pore architectures is challenging. Membranes with narrow channels and hydrophilic functionality are shown to exhibit salt ions transport and selectivity towards small organic molecules.

Laminated self-standing covalent organic framework membrane with uniformly distributed subnanopores for ionic and molecular sieving

Abstract: The preparation of subnanoporous covalent-organic-framework (COF) membranes with high performance for ion/molecule sieving still remains a great challenge. In addition to the difficulties in fabricating large-area COF membranes, the main reason is that the pore size of 2D COFs is much larger than that of most gas molecules and/or ions. It is urgently required to further narrow their pore sizes to meet different separation demands. Herein, we report a simple and scalable way to grow large-area, pliable, free-standing COF membranes via a one-step route at organic–organic interface. The pore sizes of the membranes can be adjusted from >1 nm to sub-nm scale by changing the stacking mode of COF layers from AA to AB stacking. The obtained AB stacking COF membrane composed of highly-ordered nanoflakes is demonstrated to have narrow aperture (∼0.6 nm), uniform pore distribution and shows good potential in organic solvent nanofiltration, water treatment and gas separation. Fabrication of large scale and defect free covalent organic framework (COF) membranes with pores small enough for gas sieving remains challenging. Here, the authors report a scalable fabrication method to grow large area defect free COF membranes and to tune the pore size in the sub-nm region by adjusting the stacking modes of the COF layers.

Perovskite-filled membranes for flexible and large-area direct-conversion X-ray detector arrays

Abstract: The soft nature of metal halide perovskites makes them potentially applicable as flexible X-ray detectors. Here we report a structure of perovskite-filled membranes (PFMs) for highly sensitive, flexible and large-area X-ray detectors. PFMs with areas up to 400 cm2 are formed by infiltrating saturated perovskite solution through porous polymer membranes followed by hot lamination. The good connectivity and crystallization of perovskite crystals in the membranes enable a large mobility–lifetime product. The sensitivity of the X-ray detectors under a field of 0.05 V µm−1 reaches 8,696 ± 228 µC Gyair−1 cm−2 and shows no degradation after storage for over six months and exposure to a dose of 376.8 Gyair, equivalent to 1.88 million chest X-ray scans. The flexible PFMs can be bent at radii down to 2 mm without losing performance. The stand-alone detector array is curved and put inside metal pipes for the detection of material defects with imaging quality superior to flat-panel detectors. Perovskite-filled-membranes enable flexible, sensitive and large-area X-ray detectors. The structures are made by infiltrating perovskite solution into porous polymer membranes.

Oppositely Charged Ti3C2Tx MXene Membranes with 2D Nanofluidic Channels for Osmotic Energy Harvesting

Abstract: Membrane-based reverse electrodialysis (RED) is considered as the most promising technique to harvest osmotic energy. However, the traditional membranes are limited by high internal resistance and low efficiency, resulting in undesirable power densities. Herein, we report the combination of oppositely charged Ti3 C2 Tx MXene membranes (MXMs) with confined 2D nanofluidic channels as high-performance osmotic power generators. The negatively or positively charged 2D MXene nanochannels exhibit typical surface-charge-governed ion transport and show excellent cation or anion selectivity. By mixing the artificial sea water (0.5 m NaCl) and river water (0.01 m NaCl), we obtain a maximum power density of ca. 4.6 Wm-2 , higher than most of the state-of-the-art membrane-based osmotic power generators, and very close to the commercialization benchmark (5 Wm-2 ). Through connecting ten tandem MXM-RED stacks, the output voltage can reach up 1.66 V, which can directly power the electronic devices.

How cholesterol stiffens unsaturated lipid membranes

Abstract: Cholesterol is an integral component of eukaryotic cell membranes and a key molecule in controlling membrane fluidity, organization, and other physicochemical parameters. It also plays a regulatory function in antibiotic drug resistance and the immune response of cells against viruses, by stabilizing the membrane against structural damage. While it is well understood that, structurally, cholesterol exhibits a densification effect on fluid lipid membranes, its effects on membrane bending rigidity are assumed to be nonuniversal; i.e., cholesterol stiffens saturated lipid membranes, but has no stiffening effect on membranes populated by unsaturated lipids, such as 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC). This observation presents a clear challenge to structure-property relationships and to our understanding of cholesterol-mediated biological functions. Here, using a comprehensive approach-combining neutron spin-echo (NSE) spectroscopy, solid-state deuterium NMR (2H NMR) spectroscopy, and molecular dynamics (MD) simulations-we report that cholesterol locally increases the bending rigidity of DOPC membranes, similar to saturated membranes, by increasing the bilayer's packing density. All three techniques, inherently sensitive to mesoscale bending fluctuations, show up to a threefold increase in effective bending rigidity with increasing cholesterol content approaching a mole fraction of 50%. Our observations are in good agreement with the known effects of cholesterol on the area-compressibility modulus and membrane structure, reaffirming membrane structure-property relationships. The current findings point to a scale-dependent manifestation of membrane properties, highlighting the need to reassess cholesterol's role in controlling membrane bending rigidity over mesoscopic length and time scales of important biological functions, such as viral budding and lipid-protein interactions.

Realizing small-flake graphene oxide membranes for ultrafast size-dependent organic solvent nanofiltration.

Abstract: Membranes for organic solvent nanofiltration (OSN) or solvent-resistant nanofiltration (SRNF) offer unprecedented opportunities for highly efficient and cost-competitive solvent recovery in the pharmaceutical industry. Here, we describe small-flake graphene oxide (SFGO) membranes for high-performance OSN applications. Our strategy exploits lateral dimension control to engineer shorter and less tortuous transport pathways for solvent molecules. By using La3+ as a cross-linker and spacer for intercalation, the SFGO membrane selective layer was stabilized, and size-dependent ultrafast selective molecular transport was achieved. The methanol permeance was up to 2.9-fold higher than its large-flake GO (LFGO) counterpart, with high selectivity toward three organic dyes. More importantly, the SFGO-La3+ membrane demonstrated robust stability for at least 24 hours under hydrodynamic stresses that are representative of realistic OSN operating conditions. These desirable attributes stem from the La3+ cross-linking, which forms uniquely strong coordination bonds with oxygen-containing functional groups of SFGO. Other cations were found to be ineffective.

Molecular Bridges Stabilize Graphene Oxide Membranes in Water

Abstract: Recent innovations highlight the great potential of two-dimensional graphene oxide (GO) films in water-related applications. However, undesirable water-induced effects, such as the redispersion and peeling of stacked GO laminates, greatly limit their performance and impact their practical application. It remains a great challenge to stabilize GO membranes in water. A molecular bridge strategy is reported in which an interlaminar short-chain molecular bridge generates a robust GO laminate that resists the tendency to swell. Furthermore, an interfacial long-chain molecular bridge adheres the GO laminate to a porous substrate to increase the mechanical strength of the membrane. By rationally creating and tuning the molecular bridges, the stabilized GO membranes can exhibit outstanding durability in harsh operating conditions, such as cross-flow, high-pressure, and long-term filtration. This general and scalable stabilizing approach for GO membranes provides new opportunities for reliable two-dimensional laminar films used in aqueous environments.

Improved osmotic energy conversion in heterogeneous membrane boosted by three-dimensional hydrogel interface.

Abstract: The emerging heterogeneous membranes show unprecedented superiority in harvesting the osmotic energy between ionic solutions of different salinity. However, the power densities are limited by the low interfacial transport efficiency caused by a mismatch of pore alignment and insufficient coupling between channels of different dimensions. Here we demonstrate the use of three-dimensional (3D) gel interface to achieve high-performance osmotic energy conversion through hybridizing polyelectrolyte hydrogel and aramid nanofiber membrane. The ionic diode effect of the heterogeneous membrane facilitates one-way ion diffusion, and the gel layer provides a charged 3D transport network, greatly enhancing the interfacial transport efficiency. When used for harvesting the osmotic energy from the mixing of sea and river water, the heterogeneous membrane outperforms the state-of-the-art membranes, to the best of our knowledge, with power densities of 5.06 W m−2. The diversity of the polyelectrolyte and gel makes our strategy a potentially universal approach for osmotic energy conversion. Heterogeneous membranes show great promise in harvesting the osmotic energy, but the performance is limited by the low interfacial transport efficiency. Here, the authors report use of a three-dimensional polyelectrolyte gel interface to achieve high-performance osmotic energy conversion.

Self-standing and flexible covalent organic framework (COF) membranes for molecular separation

Abstract: Almost all covalent organic framework (COF) materials conventionally fabricated by solvothermal method at high temperatures and pressures are insoluble and unprocessable powders, which severely hinder their widespread applications. This work develops an effective and facile strategy to construct flexible and free-standing pure COF membranes via the liquid-liquid interface-confined reaction at room temperature and atmospheric pressure. The aperture size and channel chemistry of COF membranes can be rationally designed by bridging various molecular building blocks via strong covalent bonds. Benefiting from the highly-ordered honeycomb lattice, high solvent permeances are successfully obtained and follow the trend of acetonitrile > acetone > methanol > ethanol > isopropanol. Interestingly, the imine-linked COF membrane shows higher nonpolar solvent permeances than b-ketoenamine-linked COF due to their difference in pore polarity. Both kinds of COF membranes exhibit high solvent permeances, precise molecular sieving, excellent shape selectivity, and sufficient flexibility for membrane-based separation science and technology.