Metamaterial absorber

About: Metamaterial absorber is a research topic. Over the lifetime, 3126 publications have been published within this topic receiving 84175 citations.

A metamaterial absorber for the terahertz regime: Design, fabrication and characterization

Abstract: We present a metamaterial that acts as a strongly resonant absorber at terahertz frequencies. Our design consists of a bilayer unit cell which allows for maximization of the absorption through independent tuning of the electrical permittivity and magnetic permeability. An experimental absorptivity of 70% at 1.3 terahertz is demonstrated. We utilize only a single unit cell in the propagation direction, thus achieving an absorption coefficient α=2000 cm-1. These metamaterials are promising candidates as absorbing elements for thermally based THz imaging, due to their relatively low volume, low density, and narrow band response.

High performance optical absorber based on a plasmonic metamaterial

Abstract: High absorption efficiency is particularly desirable at present for various microtechnological applications including microbolometers, photodectors, coherent thermal emitters, and solar cells. Here we report the design, characterization, and experimental demonstration of an ultrathin, wide-angle, subwavelength high performance metamaterial absorber for optical frequencies. Experimental results show that an absorption peak of 88% is achieved at the wavelength of ∼1.58 μm, though theoretical results give near perfect absorption.

Ultrabroadband light absorption by a sawtooth anisotropic metamaterial slab

Abstract: We present an ultrabroadband thin-film infrared absorber made of sawtoothed anisotropic metamaterial. Absorptivity of higher than 95% at normal incidence is supported in a wide range of frequencies, where the full absorption width at half-maximum is about 86%. Such property is retained well at a very wide range of incident angles too. Light of shorter wavelengths are harvested at upper parts of the sawteeth of smaller widths, while light of longer wavelengths are trapped at lower parts of larger tooth widths. This phenomenon is explained by the slowlight modes in anisotropic metamaterial waveguide. Our study can be applied in the field of designing photovoltaic devices and thermal emitters.

Experimental demonstration of frequency-agile terahertz metamaterials

Abstract: Metamaterials exhibit numerous novel effects1,2,3,4,5 and operate over a large portion of the electromagnetic spectrum6,7,8,9,10. Metamaterial devices based on these effects include gradient-index lenses11,12, modulators for terahertz radiation13,14,15 and compact waveguides16. The resonant nature of metamaterials results in frequency dispersion and narrow bandwidth operation where the centre frequency is fixed by the geometry and dimensions of the elements comprising the metamaterial composite. The creation of frequency-agile metamaterials would extend the spectral range over which devices function and, further, enable the manufacture of new devices such as dynamically tunable notch filters. Here, we demonstrate such frequency-agile metamaterials operating in the far-infrared by incorporating semiconductors in critical regions of metallic split-ring resonators. For this first-generation device, external optical control results in tuning of the metamaterial resonance frequency by ∼20%. Our approach is integrable with current semiconductor technologies and can be implemented in other regions of the electromagnetic spectrum. Metamaterials that possess frequency tunability enable new device functions. By external optical control through the incorporation of semiconductors in metallic split-ring resonators, the researchers provide an elegant solution to frequency-agile terahertz metamaterials.

Negative refraction in semiconductor metamaterials.

Abstract: An optical metamaterial is a composite in which subwavelength features, rather than the constituent materials, control the macroscopic electromagnetic properties of the material. Recently, properly designed metamaterials have garnered much interest because of their unusual interaction with electromagnetic waves. Whereas nature seems to have limits on the type of materials that exist, newly invented metamaterials are not bound by such constraints. These newly accessible electromagnetic properties make these materials an excellent platform for demonstrating unusual optical phenomena and unique applications such as subwavelength imaging and planar lens design. 'Negative-index materials', as first proposed, required the permittivity, epsilon, and permeability, mu, to be simultaneously less than zero, but such materials face limitations. Here, we demonstrate a comparatively low-loss, three-dimensional, all-semiconductor metamaterial that exhibits negative refraction for all incidence angles in the long-wave infrared region and requires only an anisotropic dielectric function with a single resonance. Using reflection and transmission measurements and a comprehensive model of the material, we demonstrate that our material exhibits negative refraction. This is furthermore confirmed through a straightforward beam optics experiment. This work will influence future metamaterial designs and their incorporation into optical semiconductor devices.