Methacrylic acid

About: Methacrylic acid is a research topic. Over the lifetime, 13058 publications have been published within this topic receiving 173201 citations. The topic is also known as: α-Methacrylic acid & 2-Methylacrylic acid.

Effect of iron counter-ions on the redox properties of the keggin-type molybdophosphoric heteropolyacid. Part I. An experimental study on isobutane oxidation catalysts

Abstract: Keggin-type molybdophosphoric heteropolyacid with protons partially substituted by iron cations in a bulk form (Fe0.85H0.45PMo12O40) or supported on the cesium salt (Cs2Fe0.2H0.4PMo12O40) have been synthesized and characterized by different techniques like the Mossbauer spectroscopy and the electron spin resonance (ESR). The effect of iron on the redox and catalytic properties for the oxidation of isobutane into methacrylic acid (MAA) has also been studied. Iron has been shown to have a different effect whether acts as a counter-cation in the bulk acid or in the acid supported on the cesium salt. In the first case, it increases both the selectivity in methacrylic acid and methacrolein (MA) and the activity of the acid phase whereas in the second case, it increases only the selectivity. This difference has been explained by the existence of an electron transfer between iron and molybdenum occurring only in the bulk acid. This electron transfer was related to a combined hydration-oxidation mechanism which promotes the reducibility of the solid and consequently its catalytic activity.

Molecularly Imprinted Polymer Nanoparticles for Formaldehyde Sensing with QCM.

Abstract: Herein, we report on molecularly imprinted polymers (MIPs) for detecting formaldehyde vapors in air streams. A copolymer thin film consisting of styrene, methacrylic acid, and ethylene glycol dimethacrylate on quartz crystal microbalance (QCM) yielded a detection limit of 500 ppb formaldehyde in dry air. Surprisingly, these MIPs showed specific behavior when tested against a range of volatile organic compounds (VOCs), such as acetaldehyde, methanol, formic acid, and dichloromethane. Despite thus being a suitable receptor in principle, the MIPs were not useful for measurements at 50% humidity due to surface saturation by water. This was overcome by introducing primary amino groups into the polymer via allyl amine and by changing the coating morphology from thin film to nanoparticles. This led to the same limit of detection (500 ppb) and selectivity as before, but at the real-life conditions of 50% relative humidity.

Polyhedral Oligomeric Silsesquioxane (POSS) Based Resists: Material Design Challenges and Lithographic Evaluation at 157 nm

Abstract: In this paper we describe the lithographic behavior and related material properties of a new class of chemically amplified, positive tone, silicon-containing methacrylate photoresists incorporating the polyhedral oligomeric silsesquioxane (POSS) group as the etch-resistant component POSS-bearing monomers were copolymerized with methacrylic acid (MA), tert-butyl methacrylate (TBMA), tert-butyl trifluoro methacrylate (TBTFMA), itaconic anhydride (IA), and 2-(trifluoromethyl) acrylic acid (TFMA), in various compositions A perfluorooctylsulfonate-based photoacid generator (PAG) was used to deprotect TBMA (or TBTFMA) to base soluble carboxylic acid by heating after exposure XPS and angular XPS analysis were used to examine possible surface segregation phenomena It was proven that POSS surface enrichment occurs for the POSS−TBMA copolymers while surface segregation may be reduced if suitable additional resist components are selected The POSS-based resists were studied for 157-nm lithographic applications a

Solution rheology of hydrophobically modified associative polymers: Effects of backbone composition and hydrophobe concentration

Abstract: We investigate the effects of polymer molecular structure on the solution rheology of a hydrophobically modified associative polymer comprised of macromonomers with alkyl hydrophobes attached to a poly(ethyl acrylate-co-methacrylic acid) backbone. In particular, the effect of polymer backbone composition with variable proportions of methacrylic acid (MAA) and ethyl acrylate (EA) are examined. We find that the concentration of the MAA monomer has a large impact on polymer viscoelasticity. Polymers with low MAA content have smaller hydrodynamic size that result in lower viscosities and dynamic elastic moduli compared to polymers with high MAA content. Moreover, the balance between the polymer hydrodynamic size, the chain flexibility, and the aggregation of the EA blocks yield maxima in these material functions with respect to the MAA concentration. The scaling of shear viscosity, high frequency elastic modulus, and creep compliance with polymer concentration exhibits power-law behavior with different exponents. In all cases, three power-law regimes, regardless of the MAA content, are observed that can be attributed to the presence of different modes of hydrophobic interaction. However, the transitions shift to lower concentrations as the MAA content increases. With regards to the effects of the macromonomer side-chain concentration, we observe a substantial increase in viscosity at intermediate macromonomer content (1 mol %), possibly due to an increase in the number of intermolecular junctions as the number of hydrophobes per chain increases. This is in contrast to (i) low macromonomer concentration (0.3 mol %) behavior that reveals low viscosity due to weak hydrophobic associations, and (ii) high macromonomer concentration (1.9 mol %) behavior that favors more intramolecular association resulting in lower viscoelastic properties compared to intermediate macromonomer concentrations.We investigate the effects of polymer molecular structure on the solution rheology of a hydrophobically modified associative polymer comprised of macromonomers with alkyl hydrophobes attached to a poly(ethyl acrylate-co-methacrylic acid) backbone. In particular, the effect of polymer backbone composition with variable proportions of methacrylic acid (MAA) and ethyl acrylate (EA) are examined. We find that the concentration of the MAA monomer has a large impact on polymer viscoelasticity. Polymers with low MAA content have smaller hydrodynamic size that result in lower viscosities and dynamic elastic moduli compared to polymers with high MAA content. Moreover, the balance between the polymer hydrodynamic size, the chain flexibility, and the aggregation of the EA blocks yield maxima in these material functions with respect to the MAA concentration. The scaling of shear viscosity, high frequency elastic modulus, and creep compliance with polymer concentration exhibits power-law behavior with different expone...