Methyl isobutyl ketone

About: Methyl isobutyl ketone is a research topic. Over the lifetime, 2071 publications have been published within this topic receiving 26976 citations. The topic is also known as: Hexone & Isobutyl methyl ketone.

High-salt-mist high-weather-proof water paint and preparing method thereof

Abstract: The invention relates to high-salt-mist high-weather-proof water paint and a preparing method of the high-salt-mist high-weather-proof water paint The high-salt-mist high-weather-proof water paint mainly comprises acrylic acid modified emulsion The acrylic acid modified emulsion is composed of isobutyl alcohol, ethylene glycol monobutyl ether, methyl isobutyl ketone, vinylidene chloride, dodecafluoroheptyl methacrylate, perluorooctyl acrylate, vinyl trimethoxy silane, acrylic acid, methyl methacrylate, hydroxyethyl acrylate, phenylethylene, 2-ethylhexyl acrylate, azodiisobutyronitrile, N-methyl monoethanolamine and deionized water The paint is quite excellent primer-topcoat coating and suitable for metal workpieces, the paint is dried at normal temperature after being sprayed, the appearance of a coating is smooth and bright, the leveling property is good, the mechanical property is good, the weather-proof property is excellent, after 2500 hours of QUV aging tests, the dulling rate is smaller than or equal to 15%, and delta E is smaller than or equal to 15, meanwhile, corrosion resistance is good, salt mist resistance reaches 1000 hours, and the one-way corrosion width is smaller than or equal to 2 mm

A New Catalyst for Mibk Synthesis—Palladium on Zsm-5 Zeolites

Abstract: The one-step vapour phase synthesis of methyl isobutyl ketone (MIBK) was extensively studied on supported bifunctional Pd catalysts Effects of support acidity and Pd metal dispersion on both acetone conversion and MIBK selectivity were examined It was found that ZSM-5 modified by exchange with alkali metal cation, especially Cs ions, would enhance the selectivity of MIBK The results indicated that MIBK selectivity as high as 82% with the conversion of acetone about 42% at 250°C could be obtained

Combination of directly suspended droplet microextraction and flame atomic absorption spectrometry for determination of trace amounts of iron and copper

Abstract: A miniaturized liquid-phase extraction procedure based on directly suspended droplet microextraction combined with flame atomic absorption spectrometry was developed for determination of trace amounts of iron and copper, without any need for the centrifugation step for phase separation. The method was based on the extraction of the iron and copper complexes with 2-mercaptopyridine-N-oxide onto a microdrop of methyl isobutyl ketone (MIBK) as extractant solvent. The factors influencing the extraction were optimized. Under optimum conditions, an enrichment factor of ~25 was obtained for both iron and copper from only 6.5 mL of aqueous phase. The analytical curves were linear between 40-800 μg L-1 and 25-1200 μg L-1 for iron and copper, respectively. The limits of detection were 3.76 μg L-1and 1.84 μg L-1 for iron and copper, respectively. The developed method has been successfully applied for the determination of iron and copper ions in environmental waters, fruits, vegetables and also certified reference materials, with high efficiency.

Determination of Nickel in Biological Samples by Electrothermal Atomization-Atomic Absorption Spectrometry Involving a Prior Extraction with 1,5-Bis (Di-2-Pyridylmethylene) Thiocarbono-Hydrazide

Abstract: The use of 1,5-bis(di-2-pyridylmethylene) thiocarbono-hydrazide as a reagent for the extraction of Ni(II), Co(II), Zn(II), Fe(II), Cd(II) and Cu(II) into methyl isobutyl ketone has been studied, and a method for the determination of nickel at ultra-trace (ng/ml) level has been developed, by using electrothermal-atomization (graphite furnace) atomic absorption spectrometry involving a prior extraction with the cited extracting reagent. The chief advantage of the proposed method lies in its maximum allowed aqueous-to-organic phase volume ratio of 15. It has been successfully applied to the determination of nickel substrates in various biological samples.