Microheater

About: Microheater is a research topic. Over the lifetime, 814 publications have been published within this topic receiving 12478 citations.

On-chip Cell Immobilization and Monitoring System Using Thermosensitive Gel Controlled by Suspended Polymeric Microbridge

Abstract: In this paper, we describe the fabrication of a temperature-controlled microfluidic chip for cell immobilization using a thermosensitive hydrogel of poly (N-isopropylacrylamide) (PNIPAAm). A mixture of PNIPAAm solution, yeast cells, and Calcein-AM fluorescent dye is flowed in the microchannel, and the indium-tin-oxide (ITO) microheaters that were fabricated by micromachining technology heat a PNIPAAm gel. However, if the gel is very thick, it blocks the observation of the culturing cells and reduces the SNR. To address this problem, we fabricate a suspended microbridge above the microheater that limits the height of the gel, ensuring that it forms a thin and transparent layer above the heater. Microheaters and suspended biocompatible microbridge are integrated on a chip in which yeast-cell immobilization can be performed by gelation of a PNIPAAm solution.

An Application of Plastic Microchannel-Microheater Chips to a Thermal Synthetic Reaction

Abstract: Polystyrol microchannel-microheater chips were fabricated on the basis of imprinting and photolithography techniques. The solution (i.e., methanol) temperature in the vicinity of the microheater (width = 100 or 200 µm and length = 100 µm) integrated in the channel (width = 100 µm and depth = 20 µm) was evaluated on the basis of the temperature-dependent fluorescence lifetime of Rhodamine B as a function of a flow rate and the voltage applied to the heater. The study demonstrated that the fabricated chip acted certainly as a microheater. The chip was then applied to the thermal reaction between benzaldehyde and malononitrile in methanol. Under optimum conditions, benzilidenemalononitrile as the product of the reaction was obtained in a 96% yield with the reaction time of 84 s.

Design considerations for a CMOS Lab-on-Chip microheater array to facilitate the in vitro thermal stimulation of neurons

Abstract: This paper identifies and addresses key design considerations and trade-offs in the implementation of a CMOS high-resolution microheater array for Lab-on-Chip (LOC) applications. Specifically, this is investigated in the context of facilitating the in vitro thermal stimulation of single neurons. The paper analyses the electro-thermal response (by means of COMSOL simulations) and reliability issues (such as melting and electromigration) of different microheater designs. The analysis shows that a small-area heater is more efficient in terms of power, but it has more reliability problems essentially due to electromigration effects. For the proposed heater designs, the expected lifetime is a few days (in continuous operation) in the worst scenario, which is still generally acceptable for LOC applications.