Modal testing

About: Modal testing is a research topic. Over the lifetime, 4047 publications have been published within this topic receiving 64772 citations.

Mathematical modeling of actively controlled piezo smart structures: a review

Abstract: This is a review paper on mathematical modeling of actively controlled piezo smart structures. Paper has four sections to discuss the techniques to: (i) write the equations of motion (ii) implement sensor-actuator design (iii) model real life environmental effects and, (iv) control structural vibrations. In section (i), methods of writing equations of motion using equilibrium relations, Hamilton`s principle, finite element technique and modal testing are discussed. In section (ii), self-sensing actuators, extension-bending actuators, shear actuators and modal sensors/actuators are discussed. In section (iii), modeling of thermal, hygro and other non-linear effects is discussed. Finally in section (iv), various vibration control techniques and useful software are mentioned. This review has two objectives: (i) practicing engineers can pick the most suitable philosophy for their end application and, (ii) researchers can come to know how the field has evolved, how it can be extended to real life structures and what the potential gaps in the literature are.

Modal analysis for masonry arch bridge spandrell wall separation identification

Abstract: The arch bridge forms an important part of our infrastructure, and maintenance of the bridge stock is becoming increasingly expensive. This paper presents the results of a nondestructive investigation of large scale model brickwork arches. Experiments were undertaken on brickwork arches using modal testing. The key features detected were: the effect of load on the backfill's surface, and the effect of spandrel wall separation from the arch itself. Mode shapes, fundamental frequencies, and damping ratios are presented for both qualitative and quantitative analysis of arch behaviour. Changes in these parameters were used to detect defects in the structures; as such the method may prove useful as a tool to assist civil engineers currently undertaking major bridge inspections.

Simplified seismic analysis of asymmetric building systems

Abstract: The paper reviews the uncoupled modal response history analysis (UMRHA) and modal pushover analysis (MPA) procedure in the analysis of asymmetric structures. From the pushover curves in ADRS format, showing the relationships of base shear versus roof translation and base torque versus roof rotation, a bifurcating characteristic of the pushover curves of an asymmetric structure is observed. A two-degree-of-freedom (2DOF) modal stick is constructed using lump mass eccentrically placed at the end of beam which is connected with the column by a rotational spring. By converting the equation of motion of a whole structure into 2DOF modal equations, all of the elastic properties in the 2DOF modal sticks can be determined accurately. A mathematical proof is carried out to demonstrate that the 2DOF modal stick is consistent with the single-degree-of-freedom (SDOF) modal stick at elastic state. The bifurcating characteristic of modal pushover curves and the interaction of modal translation and rotation can be considered rationally by this 2DOF modal stick. In order to verify the effectiveness of this proposed 2DOF modal stick, a two-storey asymmetric building structure was analysed by the UMRHA procedure incorporating this novel 2DOF modal sticks (2DMPA) and conventional SDOF modal sticks (SDMPA), respectively. The analytical results are compared with those obtained by nonlinear response history analysis (RHA). It is illustrated that the accuracy of the rotational response histories obtained by 2DMPA is much better than those obtained by SDMPA. Consequently, the estimations of translational response histories on flexible side (FS) and stiff side (SS) of the building structure are also improved.