Topic
Montmorillonite
About: Montmorillonite is a research topic. Over the lifetime, 13981 publications have been published within this topic receiving 368796 citations.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, the properties of nylon 6-clay hybrids, such as molecular composites of nylon and silicate layers of montmorillonite and saponite, NCH's and NCHP's, respectively, have been synthesized.
Abstract: Various nylon 6-clay hybrids, such as molecular composites of nylon 6 and silicate layers of montmorillonite and saponite, NCH's and NCHP's, respectively, have been synthesized. To estimate the mechanical properties of these hybrids, tensile, flexural, impact, and heat distortion tests were carried out. NCH was found superior in strength and modulus and comparable in impact strength to nylon 6. The heat distortion temperature (HDT) of NCH (montmorillonite: 4.7 wt. %) was 152 °C, which was 87 °C higher than that of nylon 6. In NCHP, saponite had a smaller effect on the increase of these mechanical properties. The modulus and HDT of NCH and NCHP increased with an increase in the amount of clay minerals. It was found that these properties were well described by the contribution of the constrained region calculated from the storage and loss modulus at the glass transition temperature. According to the mixing law on elastic modulus, the following expression was obtained between the modulus E at 120 °C and the fraction of the constrained region C, En = Ecn = C, where the values of n and Ec (modulus of the constrained region) were 0.685 and 1.02 GPa, respectively.
2,492 citations
••
TL;DR: In this paper, the carboxyl and amino end groups were attributed to ammonium cations (-NH3+) of nylon molecules, because the difference agreed with the anion site concentration of the montmorillonite in NCH.
Abstract: It was found that montmorillonite cation exchanged for 12-aminolauric acid (12-montmorillonite) was swollen by ∊-caprolactam to form a new intercalated compound. Caprolactam was polymerized in the interlayer of montmorillonite, a layer silicate, yielding a nylon 6-clay hybrid (NCH). The silicate layers of montmorillonite were uniformly dispersed in nylon 6. The carboxyl end groups of 12-aminolauric acid in 12-montmorillonite initiated polymerization of ∊-caprolactam, and as 12-montmorillonite content became larger, the molecular weight of nylon was reduced. From the result of end-group analysis, carboxyl end groups were more than amino end groups. The difference between the carboxyl and the amino end groups was attributed to ammonium cations (-NH3+) of nylon molecules, because the difference agreed with the anion site concentration of the montmorillonite in NCH. It is suggested that the ammonium cations in nylon 6 interact with the anions in montmorillonite.
2,135 citations
••
TL;DR: A polyimide hybrid with montmorillonite clay mineral has been synthesized from a dimethylacetamide (DMAC) solution of poly(amic acid) and a DMAC dispersion of montmoroniite intercalated with an ammonium salt of dodecylamine as mentioned in this paper.
Abstract: A polyimide hybrid with montmorillonite clay mineral has been synthesized from a dimethylacetamide (DMAC) solution of poly(amic acid) and a DMAC dispersion of montmorillonite intercalated with an ammonium salt of dodecylamine. Montmorillonite consists of stacked silicate sheets about 2000 A in length, 10 A in thickness. In this hybrid, montmorillonite is dispersed homogeneously into the polyimide matrix and oriented parallel to the film surface. Thanks to this special structure, this hybrid showed excellent gas barrier properties. Only 2 wt % addition of montmorillonite brought permeability coefficients of various gases to values less than half of those of ordinary polyimide. Furthermore, this hybrid had low thermal expansion coefficient. © 1993 John Wiley & Sons, Inc.
1,387 citations
••
TL;DR: The feasibility of using two important and common clay minerals, kaolinite and montmorillonite, as adsorbents for removal of toxic heavy metals has been reviewed.
1,283 citations