Showing papers on "Multipath routing published in 2009"

A case for bufferless routing in on-chip networks

Abstract: Buffers in on-chip networks consume significant energy, occupy chip area, and increase design complexity. In this paper, we make a case for a new approach to designing on-chip interconnection networks that eliminates the need for buffers for routing or flow control. We describe new algorithms for routing without using buffers in router input/output ports. We analyze the advantages and disadvantages of bufferless routing and discuss how router latency can be reduced by taking advantage of the fact that input/output buffers do not exist. Our evaluations show that routing without buffers significantly reduces the energy consumption of the on-chip cache/processor-to-cache network, while providing similar performance to that of existing buffered routing algorithms at low network utilization (i.e., on most real applications). We conclude that bufferless routing can be an attractive and energy-efficient design option for on-chip cache/processor-to-cache networks where network utilization is low.

Data center interconnect and traffic engineering

Abstract: A system for commoditizing data center networking is disclosed. The system includes an interconnection topology for a data center having a plurality of servers and a plurality of nodes of a network in the data center through which data packets may be routed. The system uses a routing scheme where the routing is oblivious to the traffic pattern between nodes in the network, and wherein the interconnection topology contains a plurality of paths between one or more servers. The multipath routing may be Valiant load balancing. It disaggregates the function of load balancing into a group of regular servers, with the result that load balancing server hardware can be distributed amongst racks in the data center leading to greater agility and less fragmentation. The architecture creates a huge, flexible switching domain, supporting any server/any service, full mesh agility, and unregimented server capacity at low cost.

Pathlet routing

Abstract: We present a new routing protocol, pathlet routing, in which networks advertise fragments of paths, called pathlets, that sources concatenate into end-to-end source routes. Intuitively, the pathlet is a highly flexible building block, capturing policy constraints as well as enabling an exponentially large number of path choices. In particular, we show that pathlet routing can emulate the policies of BGP, source routing, and several recent multipath proposals. This flexibility lets us address two major challenges for Internet routing: scalability and source-controlled routing. When a router's routing policy has only "local" constraints, it can be represented using a small number of pathlets, leading to very small forwarding tables and many choices of routes for senders. Crucially, pathlet routing does not impose a global requirement on what style of policy is used, but rather allows multiple styles to coexist. The protocol thus supports complex routing policies while enabling and incentivizing the adoption of policies that yield small forwarding plane state and a high degree of path choice.

Routing Requirements for Urban Low-Power and Lossy Networks

Abstract: The application-specific routing requirements for Urban Low Power and Lossy Networks (U-LLNs) are presented in this document. In the near future, sensing and actuating nodes will be placed outdoors in urban environments so as to improve the people's living conditions as well as to monitor compliance with increasingly strict environmental laws. These field nodes are expected to measure and report a wide gamut of data, such as required in smart metering, waste disposal, meteorological, pollution and allergy reporting applications. The majority of these nodes is expected to communicate wirelessly which - given the limited radio range and the large number of nodes - requires the use of suitable routing protocols. The design of such protocols will be mainly impacted by the limited resources of the nodes (memory, processing power, battery, etc.) and the particularities of the outdoor urban application scenarios. As such, for a wireless Routing Over Low power and Lossy networks (ROLL) solution to be useful, the protocol(s) ought to be energy-efficient, scalable, and autonomous. This documents aims to specify a set of requirements reflecting these and further U-LLNs tailored characteristics.

HOPNET: A hybrid ant colony optimization routing algorithm for mobile ad hoc network

Abstract: Mobile ad hoc network (MANET) is a group of mobile nodes which communicates with each other without any supporting infrastructure. Routing in MANET is extremely challenging because of MANETs dynamic features, its limited bandwidth and power energy. Nature-inspired algorithms (swarm intelligence) such as ant colony optimization (ACO) algorithms have shown to be a good technique for developing routing algorithms for MANETs. Swarm intelligence is a computational intelligence technique that involves collective behavior of autonomous agents that locally interact with each other in a distributed environment to solve a given problem in the hope of finding a global solution to the problem. In this paper, we propose a hybrid routing algorithm for MANETs based on ACO and zone routing framework of bordercasting. The algorithm, HOPNET, based on ants hopping from one zone to the next, consists of the local proactive route discovery within a node's neighborhood and reactive communication between the neighborhoods. The algorithm has features extracted from ZRP and DSR protocols and is simulated on GlomoSim and is compared to AODV routing protocol. The algorithm is also compared to the well known hybrid routing algorithm, AntHocNet, which is not based on zone routing framework. Results indicate that HOPNET is highly scalable for large networks compared to AntHocNet. The results also indicate that the selection of the zone radius has considerable impact on the delivery packet ratio and HOPNET performs significantly better than AntHocNet for high and low mobility. The algorithm has been compared to random way point model and random drunken model and the results show the efficiency and inefficiency of bordercasting. Finally, HOPNET is compared to ZRP and the strength of nature-inspired algorithm is shown.

Routing in Delay-Tolerant Networks Comprising Heterogeneous Node Populations

Abstract: Communication networks are traditionally assumed to be connected. However, emerging wireless applications such as vehicular networks, pocket-switched networks, etc., coupled with volatile links, node mobility, and power outages, will require the network to operate despite frequent disconnections. To this end, opportunistic routing techniques have been proposed, where a node may store-and-carry a message for some time, until a new forwarding opportunity arises. Although a number of such algorithms exist, most focus on relatively homogeneous settings of nodes. However, in many envisioned applications, participating nodes might include handhelds, vehicles, sensors, etc. These various "classesrdquo have diverse characteristics and mobility patterns, and will contribute quite differently to the routing process. In this paper, we address the problem of routing in intermittently connected wireless networks comprising multiple classes of nodes. We show that proposed solutions, which perform well in homogeneous scenarios, are not as competent in this setting. To this end, we propose a class of routing schemes that can identify the nodes of "highest utilityrdquo for routing, improving the delay and delivery ratio by four to five times. Additionally, we propose an analytical framework based on fluid models that can be used to analyze the performance of various opportunistic routing strategies, in heterogeneous settings.

Robust multipath routing

Abstract: A robust multipath routing method for communications over a wireless network is disclosed. The method comprises receiving a packet stream at a first node, identifying a subset of packets of the packet stream, determining a first route for transmitting packets of the packet stream other than the subset of packets from the first node to a second node and determining a second route for transmitting the subset of packets from the first node to the second node, wherein the first route is different than the second route.

A genetic algorithm based approach for energy efficient routing in two-tiered sensor networks

Abstract: Higher power relay nodes can be used as cluster heads in two-tiered sensor networks to achieve improved network lifetime. The relay nodes may form a network among themselves to route data towards the base station. In this model, the lifetime of a network is determined mainly by the lifetimes of these relay nodes. An energy-aware communication strategy can greatly extend the lifetime of such networks. However, integer linear program (ILP) formulations for optimal, energy-aware routing quickly become computationally intractable and are not suitable for practical networks. In this paper, we have proposed an efficient solution, based on a genetic algorithm (GA), for scheduling the data gathering of relay nodes, which can significantly extend the lifetime of a relay node network. For smaller networks, where the global optimum can be determined, our GA based approach is always able to find the optimal solution. Furthermore, our algorithm can easily handle large networks, where it leads to significant improvements compared to traditional routing schemes.

Opportunistic routing for wireless ad hoc and sensor networks: Present and future directions

Abstract: Opportunistic routing has recently attracted much attention as it is considered a promising direction for improving the performance of wireless ad hoc and sensor networks. With opportunistic routing, intermediate nodes collaborate on packet forwarding in a localized and consistent manner. Opportunistic routing greatly increases transmission reliability and network throughput by taking advantage of the broadcast nature of the wireless medium. In this article we first illustrate the basic idea behind opportunistic routing, and then categorize current research work based on different criteria. We illustrate how different protocols work, and discuss their merits and drawbacks. Finally, we point out potential issues and future directions in opportunistic routing for wireless ad hoc and sensor networks.

On Combining Shortest-Path and Back-Pressure Routing Over Multihop Wireless Networks

Abstract: Back-pressure based algorithms based on the algorithm by Tassiulas and Ephremides have recently received much attention for jointly routing and scheduling over multi-hop wireless networks. However a significant weakness of this approach has been in routing, because the traditional back-pressure algorithm explores and exploits all feasible paths between each source and destination. While this extensive exploration is essential in order to maintain stability when the network is heavily loaded, under light or moderate loads, packets may be sent over unnecessarily long routes and the algorithm could be very inefficient in terms of end-to-end delay and routing convergence times. This paper proposes new routing/scheduling back-pressure algorithms that not only guarantees network stability (through-put optimality), but also adaptively selects a set of optimal routes based on shortest-path information in order to minimize average path-lengths between each source and destination pair. Our results indicate that under the traditional back-pressure algorithm, the end-to-end packet delay first decreases and then increases as a function of the network load (arrival rate). This surprising low-load behavior is explained due to the fact that the traditional back-pressure algorithm exploits all paths (including very long ones) even when the traffic load is light. On the otherhand, the proposed algorithm adaptively selects a set of routes according to the traffic load so that long paths are used only when necessary, thus resulting in much smaller end-to-end packet delays as compared to the traditional back-pressure algorithm.

Energy Efficient Collision Aware Multipath Routing for Wireless Sensor Networks

Abstract: Multipath routing can reduce the need for route updates, balance the traffic load and increase the data transfer rate in a wireless sensor network, improving the utilization of the limited energy of sensor nodes. However, previous multiple path routing methods use flooding for route discovery and transmit data with maximum power regardless of need, which results in waste of energy. Moreover, often a serious problem of collisions among multiple paths arises. In this paper, we propose an energy efficient and collision aware (EECA) node-disjoint multipath routing algorithm for wireless sensor networks. With the aid of node position information, the EECA algorithm attempts to find two collision-free routes using constrained and power adjusted flooding and then transmits the data with minimum power needed through power control component of the protocol. Our preliminary simulation results show that ECCA algorithm results in good overall performance, saving energy and transferring data efficiently.

Hyperbolic Embedding and Routing for Dynamic Graphs

Abstract: We propose an embedding and routing scheme for arbitrary network connectivity graphs, based on greedy routing and utilizing virtual node coordinates. In dynamic multihop packet-switching communication networks, routing elements can join or leave during network operation or exhibit intermittent failures. We present an algorithm for online greedy graph embedding in the hyperbolic plane that enables incremental embedding of network nodes as they join the network, without disturbing the global embedding. Even a single link or node removal may invalidate the greedy routing success guarantees in network embeddings based on an embedded spanning tree subgraph. As an alternative to frequent reembedding of temporally dynamic network graphs in order to retain the greedy embedding property, we propose a simple but robust generalization of greedy distance routing called Gravity-Pressure (GP) routing. Our routing method always succeeds in finding a route to the destination provided that a path exists, even if a significant fraction of links or nodes is removed subsequent to the embedding. GP routing does not require precomputation or maintenance of special spanning subgraphs and, as demonstrated by our numerical evaluation, is particularly suitable for operation in tandem with our proposed algorithm for online graph embedding.

Internet route deaggregation and route selection preferencing

Abstract: A method and system for managing the routing of traffic within a network develops a topological address space map of the network to enable a “best route” selection process. The network is comprised of a backbone connected to a plurality of peering partners. Points on the network monitor traffic flows. A central facility analyzes the traffic flows and routes within the network and performs intelligent routing management. Intelligent routing management ensures that traffic is properly routed through preferred routes on the network, and avoids inefficient routing. Intelligent routing management also selects new routes to be injected into the network in order to further improve the accuracy of the address space map of the network. Intelligent routing management ensures that bandwidth is requested and delivered topologically closely to peering partner networks, and that traffic is carried by the backbone for long haul data distribution in both directions.

Multihop cognitive radio networks: to route or not to route

Abstract: Routing is a fundamental issue to consider when dealing with multihop cognitive radio networks. We investigate in this work, the potential routing approaches that can be employed in such adaptive wireless networks. We argue that in multihop cognitive radio environments no general routing solution can be proposed, but cognitive environments can be classified into three separate categories, each requiring specific routing solutions. Basically, this classification is imposed by the activity of the users on the licensed bands that cognitive radios try to access. First, over a relatively static primary band, where primary nodes idleness largely exceeds cognitive users communication durations, static mesh routing solutions can be reused, whereas second, over dynamically available spectrum bands new specific routing solutions have to be proposed, we give some guidelines and insights about designing such solutions. Third, if cognitive radios try to access over highly active and rarely available primary bands, opportunistic forwarding without preestablished routing is to be explored.

Routing strategies in multihop cooperative networks

Abstract: The fading characteristics and broadcast nature of wireless channels are usually not fully considered in the design of routing protocols for wireless networks. In this paper, we combine routing and cooperative diversity, with the consideration of a realistic channel model. We focus on a multihop network with multiple relays at each hop, and three routing strategies are designed to achieve the full diversity gain provided by cooperation among the relays. In particular, an optimal routing strategy is proposed to minimize the end-to-end outage, which requires the channel information of all the links and serves as a performance bound. An ad-hoc routing strategy is then proposed based on a hop-by-hop relay selection, which can be easily implemented in a distributed way. As expected, ad-hoc routing performs worse than optimal routing, especially with a large number of hops. To achieve a good complexity-performance tradeoff, an N-hop routing strategy is further proposed, where a joint optimization is performed every N hops. Simulation results are provided which verify the outage analyses of the proposed routing strategies.

Indirect adaptive routing on large scale interconnection networks

Abstract: Recently proposed high-radix interconnection networks [10] require global adaptive routing to achieve optimum performance. Existing direct adaptive routing methods are slow to sense congestion remote from the source router and hence misroute many packets before such congestion is detected. This paper introduces indirect global adaptive routing (IAR) in which the adaptive routing decision uses information that is not directly available at the source router. We describe four IAR routing methods: credit round trip (CRT) [10], progressive adaptive routing (PAR), piggyback routing (PB), and reservation routing (RES). We evaluate each of these methods on the dragonfly topology under both steady-state and transient loads. Our results show that PB, PAR, and CRT all achieve good performance. PB provides the best absolute performance, with 2-7% lower latency on steady-state uniform random traffic at 70% load, while PAR provides the fastest response on transient loads. We also evaluate the implementation costs of the indirect adaptive routing methods and show that PB has the lowest implementation cost requiring

Energy aware efficient geographic routing in lossy wireless sensor networks with environmental energy supply

Abstract: Wireless sensor networks are characterized by multihop wireless lossy links and resource constrained nodes. Energy efficiency is a major concern in such networks. In this paper, we study Geographic Routing with Environmental Energy Supply (GREES) and propose two protocols, GREES-L and GREES-M, which combine geographic routing and energy efficient routing techniques and take into account the realistic lossy wireless channel condition and the renewal capability of environmental energy supply when making routing decisions. Simulation results show that GREESs are more energy efficient than the corresponding residual energy based protocols and geographic routing protocols without energy awareness. GREESs can maintain higher mean residual energy on nodes, and achieve better load balancing in terms of having smaller standard deviation of residual energy on nodes. Both GREES-L and GREES-M exhibit graceful degradation on end-to-end delay, but do not compromise the end-to-end throughput performance.

Multirate Anypath Routing in Wireless Mesh Networks

Abstract: In this paper, we present a new routing paradigm that generalizes opportunistic routing in wireless mesh networks. In multirate anypath routing, each node uses both a set of next hops and a selected transmission rate to reach a destination. Using this rate, a packet is broadcast to the nodes in the set and one of them forwards the packet on to the destination. To date, there is no theory capable of jointly optimizing both the set of next hops and the transmission rate used by each node. We bridge this gap by introducing a polynomial-time algorithm to this problem and provide the proof of its optimality. The proposed algorithm runs in the same running time as regular shortest-path algorithms and is therefore suitable for deployment in link-state routing protocols. We conducted experiments in a 802.11b testbed network, and our results show that multirate anypath routing performs on average 80% and up to 6.4 times better than anypath routing with a fixed rate of 11 Mbps. If the rate is fixed at 1 Mbps instead, performance improves by up to one order of magnitude. I. INTRODUCTION The high loss rate and dynamic quality of links make routing in wireless mesh networks extremely challenging (1). Anypath routing 1 has been recently proposed as a way to circumvent these shortcomings by using multiple next hops for each destination (3)-(6). Each packet is broadcast to a forwarding set composed of several neighbors, and the packet must be retransmitted only if none of the neighbors in the set receive it. Therefore, while the link to a given neighbor is down or performing poorly, another nearby neighbor may receive the packet and forward it on. This is in contrast to single-path routing where only one neighbor is assigned as the next hop for each destination. In this case, if the link to this neighbor is not performing well, a packet may be lost even though other neighbors may have overheard it. Existing work on anypath routing has focused on wireless networks that use a single transmission rate. This approach, albeit straightforward, presents two major drawbacks. First, using a single rate over the entire network underutilizes available bandwidth resources. Some links may perform well at a higher rate, while others may only work at a lower rate. Secondly and most importantly, the network may become disconnected at a higher bit rate. We provide experimental measurements from a 802.11b testbed which show that this phenomenon is not uncommon in practice. The key problem is that higher transmission rates have a shorter radio range, which reduces network density and connectivity. As the bit rate in- creases, links becomes lossier and the network eventually gets disconnected. Therefore, in order to guarantee connectivity, single-rate anypath routing must be limited to low rates. In multirate anypath routing, these problems do not exist; however, we face different challenges. First, we must find 1 We use the term anypath rather than opportunistic routing, since oppor- tunistic routing is an overloaded term also used for opportunistic contacts (2).

A Secure Routing Protocol Against Byzantine Attacks for MANETs in Adversarial Environments

Abstract: To secure a mobile ad hoc network (MANET) in adversarial environments, a particularly challenging problem is how to feasibly detect and defend possible attacks on routing protocols, particularly internal attacks, such as a Byzantine attack. In this paper, we propose a novel algorithm that detects internal attacks by using both message and route redundancy during route discovery. The route-discovery messages are protected by pairwise secret keys between a source and destination and some intermediate nodes along a route established by using public key cryptographic mechanisms. We also propose an optimal routing algorithm with routing metric combining both requirements on a node's trustworthiness and performance. A node builds up the trustworthiness on its neighboring nodes based on its observations on the behaviors of the neighbor nodes. Both of the proposed algorithms can be integrated into existing routing protocols for MANETs, such as ad hoc on-demand distance vector routing (AODV) and dynamic source routing (DSR). As an example, we present such an integrated protocol called secure routing against collusion (SRAC), in which a node makes a routing decision based on its trust of its neighboring nodes and the performance provided by them. The simulation results have demonstrated the significant advantages of the proposed attack detection and routing algorithm over some known protocols.

Bursty traffic over bursty links

Abstract: Accurate estimation of link quality is the key to enable efficient routing in wireless sensor networks. Current link estimators focus mainly on identifying long-term stable links for routing. They leave out a potentially large set of intermediate links offering significant routing progress. Fine-grained analysis of link qualities reveals that such intermediate links are bursty, i.e., stable in the short term.In this paper, we use short-term estimation of wireless links to accurately identify short-term stable periods of transmission on bursty links. Our approach allows a routing protocol to forward packets over bursty links if they offer better routing progress than long-term stable links. We integrate a Short Term Link Estimator and its associated routing strategy with a standard routing protocol for sensor networks. Our evaluation reveals an average of 19% and a maximum of 42% reduction in the overall transmissions when routing over long-range bursty links. Our approach is not tied to any specific routing protocol and integrates seamlessly with existing routing protocols and link estimators.

Beacon-less geographic routing made practical: challenges, design guidelines, and protocols

Abstract: Geographic routing has emerged as one of the most efficient and scalable routing solutions for wireless sensor networks. In traditional geographic routing protocols, each node exchanges periodic one-hop beacons to determine the position of its neighbors. Recent studies proved that these beacons can create severe problems in real deployments due to the highly dynamic and error-prone nature of wireless links. To avoid these problems, new variants of geographic routing protocols that do not require beacons are being proposed. In this article we review some of the latest proposals in the field of beacon-less geographic routing and introduce the main design challenges and alternatives. In addition, we perform an empirical study to assess the performance of beacon-based and beacon-less routing protocols using a real WSN deployment.

A Survey on Fault Tolerant Routing Techniques in Wireless Sensor Networks

Abstract: Wireless Sensor Networks are without a doubt one of the central issues in current research topics due to the harsh environmental conditions in which such networks can be deployed and their unique sensor network characteristics,specifically limited power supply, sensing, processing and communication capabilities. Presented with many challenges and design issues that affect the data routing, a need for a fault tolerant routing protocol becomes essential. In this paper, we summarize and highlight the key ideas of existing fault tolerant techniques of routing protocols, survey existing routing protocols proposed to support fault tolerance. Finally, we provide some future research directions in the area of fault tolerance in wireless sensor networks routing.

Comparison Research between XY and Odd-Even Routing Algorithm of a 2-Dimension 3X3 Mesh Topology Network-on-Chip

Abstract: The Network-on-Chip (NoC) has been recognized as a paradigm to solve System-on-Chip (SoC) design challenges. The routing algorithm is one of key researches of a NoC design. XY routing algorithm, which is a kind of distributed deterministic routing algorithms, is simple to be implemented. Odd-Even (OE) routing algorithm, whose implementation is complex, is a sort of distributed adaptive routing algorithms with deadlock-free ability. We demonstrate the two routing algorithms in details at first. XY routing algorithm and OE routing algorithm are then simulated and compared based on a 3X3 mesh topology NoC with NIRGAM simulator. The simulation results show that OE routing algorithm, whose P parameter equals to 1.09, increases P parameter greatly as compared to XY routing algorithm, whose P parameter equals to 0.86, in a 2-dimension 3X3 mesh topology NoC, with Constant Bit Rate (CBR) traffic condition of each tail.

Localization and routing in sensor networks by local angle information

Abstract: Location information is useful both for network organization and for sensor data integrity. In this article, we study the anchor-free 2D localization problem by using local angle measurements. We prove that given a unit disk graph and the angles between adjacent edges, it is NP-hard to find a valid embedding in the plane such that neighboring nodes are within distance 1 from each other and non-neighboring nodes are at least distance √2/2 away. Despite the negative results, however, we can find a planar spanner of a unit disk graph by using only local angles. The planar spanner can be used to generate a set of virtual coordinates that enable efficient and local routing schemes such as geographical routing or approximate shortest path routing. We also proposed a practical anchor-free embedding scheme by solving a linear program. We show by simulation that it gives both a good local embedding, with neighboring nodes embedded close and non-neighboring nodes far away, and a satisfactory global view such that geographical routing and approximate shortest path routing on the embedded graph are almost identical to those on the original (true) embedding.

Enhanced tree routing for wireless sensor networks

Abstract: Tree routing (TR) is a low-overhead routing protocol designated for simple, low-cost and low-power wireless sensor networks. It avoids flooding the network with path search and update messages in order to conserve bandwidth and energy by using only parent-child links for packet forwarding. The major drawback of TR is the increased hop-counts as compared with more sophisticated path search protocols. We propose an enhanced tree routing (ETR) strategy for sensor networks which have structured node address assignment schemes. In addition to the parent-child links, ETR also uses links to other one-hop neighbours if it is decided that this will lead to a shorter path. It is shown that such a decision can be made with minimum storage and computing cost by utilizing the address structure. Detailed algorithms for applying ETR to ZigBee networks are also presented. Simulation results reveal that ETR not only outperforms TR in terms of hop-counts, but also is more energy-efficient than TR.

Performance Study of Node-Disjoint Multipath Routing in Vehicular Ad Hoc Networks

Abstract: Many multipath routing schemes have recently been proposed to improve the performance of wireless networks. Multipath routing is supposed to reduce the end-to-end packet delay and increase the packet delivery ratio. Therefore, it can also improve the packet delivery ratio in vehicular ad hoc networks (VANETs) when the mobility of relaying vehicles is unknown. However, in wireless networks, multiple paths are exposed to mutual interference or path coupling, which impairs efficiency. The intriguing question is whether the node-disjoint multipath routing really helps. In this paper, we examine the performance of node-disjoint multipath routing in VANETs. Through extensive simulations, we explore the effect of mutual interference on the behavior of node-disjoint paths. It is shown that whether node-disjoint paths are able to improve performance, compared with the single path, is determined by path coupling and the source-destination distance. Results show that node-disjoint multipath routing can be applied to VANETs to substantially improve performance in terms of delay and packet delivery probability only if the node-disjoint paths are properly chosen.

SPREAD: Improving network security by multipath routing in mobile ad hoc networks

Abstract: We propose and investigate the SPREAD scheme as a complementary mechanism to enhance secure data delivery in a mobile ad hoc network The basic idea is to transform a secret message into multiple shares, and then deliver the shares via multiple paths to the destination so that even if a certain number of message shares are compromised, the secret message as a whole is not compromised We present the overall system architecture and discuss three major design issues: the mathematical model for the generation and reconstruction of the secret message shares, the optimal allocation of the message shares onto multiple paths in terms of security, and the multipath discovery techniques in a mobile ad hoc network Our extensive simulation results justify the feasibility and the effectiveness of the SPREAD approach

Optimal forwarder list selection in opportunistic routing

Abstract: Unlike traditional wireless routing protocols which use a single fixed path, opportunistic routing explicitly takes advantage of the broadcast nature of wireless communications by using a set of forwarders to opportunistically perform packet forwarding. A key issue in the design of opportunistic routing protocols is the forwarder list selection problem. In this paper we establish a general theory for analyzing the forwarder list selection problem, and develop an optimal solution, the minimum transmission selection (MTS) algorithm, which minimizes the expected number of transmissions and it can be incorporated into existing opportunistic routing protocols to select optimal forwarder lists. Our theory and algorithm can also be generalized to optimize other routing objectives such as minimizing the expected transmission time or energy consumption in opportunistic routing. Through extensive simulations, we demonstrate that in more than 90% cases the MTS algorithm outperforms the ETX forwarder selection scheme used in existing opportunistic routing protocols such as ExOR and MORE.