Topic
Nafion
About: Nafion is a research topic. Over the lifetime, 9110 publications have been published within this topic receiving 320865 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, a decal transfer method with various Nafion ionomer contents (10−40wt%) and their single cell performance and electrochemical characteristics were examined in atmospheric air at relative humidities of 25−95%.
89 citations
TL;DR: Results indicate that Nafion/CeO2-TiC (1 wt%) is extremely stable in PEMFC technology, and is expected to open up new perspective to expanding their applications, especially in sustainable PemFC technology.
Abstract: Cerium oxide-anchored titanium carbide (CeO2-TiC) is realized as a potential inorganic filler when modifying the Nafion matrix of a proton-exchange membrane fuel cell (PEMFC). A hydrothermal strategy was employed to synthesize CeO2-TiC of high crystallinity as a filler to mitigate the problematic properties of a proton-exchange membrane (PEM). CeO2-TiC with a weight ratio of 0.5, 1, 1.5, or 2% was incorporated into a Nafion matrix to form a hybrid by adopting a solution-casting procedure. Reinforcement owing to the presence of TiC provides increased tensile strength to PEM, and the addition of CeO2 improves the durability of PEM by scavenging free radicals. The microstructural, thermomechanical, physiochemical, and electrochemical properties of PEM, including contact angle, water sorption, water uptake, and proton conductivity, were extensively studied. Random dispersion of CeO2-TiC in the Nafion matrix improves the thermal stability, tensile strength, and water uptake while retaining proton conductivity, as compared with those of pristine Nafion. As a result, optimized Nafion/CeO2-TiC (1 wt %) achieved undiminished PEMFC performance compared to that of pristine Nafion while operating the device at 60 °C and 100% relative humidity. In addition, Nafion/CeO2-TiC (1 wt %) experienced the degradation of merely 0.6 mV h-1 during 200 h operation under identical conditions. Compared to that of Nafion/CeO2-TiC (1 wt %), pristine Nafion and Nafion-212 displayed accelerated and comparable degradation (for pristine Nafion, 1.3 mV h-1; for Nafion-212, 0.4 mV h-1). PEMFC power output, hydrogen permeability, and morphology of samples were examined after the durability test; the results indicate that Nafion/CeO2-TiC (1 wt %) is extremely stable. Since various Nafion hybrids have been reported as highly durable PEMs, this study is expected to open up new perspectives to expanding their applications, especially in sustainable PEMFC technology.
89 citations
TL;DR: In this article, the Nafion-SSA composite membrane was used as a filler for applying proton exchange membrane fuel cells under low relative humidity (RH) condition, and high water uptake and ion exchange capacity values were observed.
89 citations
TL;DR: In this article, a one-step preparation of polymer electrolyte membranes without a membrane casting process is achieved by radiation crosslinking of a polyetheretherketone (PEEK) film to prevent dissolution and deformation of the original film in sulfonating solutions.
89 citations
TL;DR: In this paper, two low equivalent weight perfluorosulfonic acid (PFSA) polymers (825 EW and 733 EW) were successfully electrospun into nanofibers by adding as little as 0.3 wt% of high molecular weight poly(ethylene oxide) as a carrier polymer.
Abstract: Two low equivalent weight perfluorosulfonic acid (PFSA) polymers (825 EW and 733 EW) were successfully electrospun into nanofibers by adding as little as 0.3 wt% of high molecular weight poly(ethylene oxide) as a carrier polymer. The electrospun fiber morphology transitioned from cylindrical filaments to flat ribbons as the total concentration of PFSA + carrier in solution increased from 5 wt% to 30 wt%. PFSA nanofiber mats were transformed into defect-free dense membranes using a four-step procedure: (i) annealing the PFSA polymer during which time intersecting fibers were welded to one another at cross points (ii) mechanically compacting the mats to increase the volume fraction of nanofibers to ∼75%, (iii) imbibing an inert polymer, Norland Optical Adhesive (NOA) 63, into the mats (to fill entirely the void space between nanofibers) and then crosslinking the NOA with UV light, and (iv) removing the poly(ethylene oxide) carrier polymer by boiling the membrane in 1.0 M H2SO4 and then in deionized water. The resulting membranes exhibited higher proton conductivities than that of commercial Nafion 212 membrane (0.16 S/cm at 80 °C and 80% relative humidity and 0.048 S/cm at 80 °C and 50% relative humidity for a membrane with 733 EW nanofibers), with low water swelling (liquid water swelling of 18% for membrane with high conductivity). The proton conductivity of both EW nanofiber composite membranes increased linearly with the PFSA nanofiber volume fraction, whereas gravimetric water swelling was less than expected, based on the volume fraction of ionomer. There was a significantly improvement in the mechanical properties of the nanofiber composite membranes, as compared to recast homogeneous PFSA films.
89 citations