scispace - formally typeset
Search or ask a question
Topic

Nanocomposite

About: Nanocomposite is a research topic. Over the lifetime, 71321 publications have been published within this topic receiving 1911332 citations. The topic is also known as: nanocomposites.


Papers
More filters
Journal ArticleDOI
01 Jul 1998-Nature
TL;DR: In this article, the authors showed that nanometre-sized ceramic powders can be used as solid plasticizers for polyethylene oxide (PEO) electrolytes to prevent crystallization on annealing from amorphous state above 60°C.
Abstract: Ionically conducting polymer membranes (polymer electrolytes) might enhance lithium-battery technology by replacing the liquid electrolyte currently in use and thereby enabling the fabrication of flexible, compact, laminated solid-state structures free from leaks and available in varied geometries1. Polymer electrolytes explored for these purposes are commonly complexes of a lithium salt (LiX) with a high-molecular-weight polymer such as polyethylene oxide (PEO). But PEO tends to crystallize below 60 °C, whereas fast ion transport is a characteristic of the amorphous phase. So the conductivity of PEO–LiX electrolytes reaches practically useful values (of about 10−4 S cm−1) only at temperatures of 60–80 °C. The most common approach for lowering the operational temperature has been to add liquid plasticizers, but this promotes deterioration of the electrolyte's mechanical properties and increases its reactivity towards the lithium metal anode. Here we show that nanometre-sized ceramic powders can perform as solid plasticizers for PEO, kinetically inhibiting crystallization on annealing from the amorphous state above 60 °C. We demonstrate conductivities of around 10−4 S cm−1 at 50 °C and 10−5 S cm−1 at 30 °C in a PEO–LiClO4 mixture containing powders of TiO2 and Al2O3 with particle sizes of 5.8–13 nm. Further optimization might lead to practical solid-state polymer electrolytes for lithium batteries.

2,695 citations

Journal ArticleDOI
03 Dec 2009-ACS Nano
TL;DR: Graphene platelets significantly out-perform carbon nanotube additives in terms of mechanical properties enhancement, and may be related to their high specific surface area, enhanced nanofiller-matrix adhesion/interlocking arising from their wrinkled (rough) surface, as well as the two-dimensional geometry of graphene platelets.
Abstract: In this study, the mechanical properties of epoxy nanocomposites with graphene platelets, single-walled carbon nanotubes, and multi-walled carbon nanotube additives were compared at a nanofiller weight fraction of 0.1 ± 0.002%. The mechanical properties measured were the Young’s modulus, ultimate tensile strength, fracture toughness, fracture energy, and the material’s resistance to fatigue crack propagation. The results indicate that graphene platelets significantly out-perform carbon nanotube additives. The Young’s modulus of the graphene nanocomposite was ∼31% greater than the pristine epoxy as compared to ∼3% increase for single-walled carbon nanotubes. The tensile strength of the baseline epoxy was enhanced by ∼40% with graphene platelets compared to ∼14% improvement for multi-walled carbon nanotubes. The mode I fracture toughness of the nanocomposite with graphene platelets showed ∼53% increase over the epoxy compared to ∼20% improvement for multi-walled carbon nanotubes. The fatigue resistance resu...

2,367 citations

Journal ArticleDOI
TL;DR: In this article, the status of worldwide research in the thermal conductivity of carbon nanotubes and their polymer nanocomposites is reviewed, as well as the relationship between thermal conductivities and the micro- and nano-structure of the composites.

2,102 citations

Journal ArticleDOI
24 Mar 1994-Nature
TL;DR: In this article, a generalized approach to the synthesis of periodic mesophases of metal oxides and cationic or anionic surfactants under a range of pH conditions is presented.
Abstract: THE recent synthesis of silica-based mesoporous materials1,2 by the cooperative assembly of periodic inorganic and surfactant-based structures has attracted great interest because it extends the range of molecular-sieve materials into the very-large-pore regime. If the synthetic approach can be generalized to transition-metal oxide mesostructures, the resulting nanocomposite materials might find applications in electrochromic or solid-electrolyte devices3,4, as high-surface-area redox catalysts5 and as substrates for biochemical separations. We have proposed recently6 that the matching of charge density at the surfactant/inorganic interfaces governs the assembly process; such co-organization of organic and inorganic phases is thought to be a key aspect of biomineralization7. Here we report a generalized approach to the synthesis of periodic mesophases of metal oxides and cationic or anionic surfactants under a range of pH conditions. We suggest that the assembly process is controlled by electrostatic complementarity between the inorganic ions in solution, the charged surfactant head groups and—when these charges both have the same sign—inorganic counterions. We identify a number of different general strategies for obtaining a variety of ordered composite materials.

1,996 citations

Journal ArticleDOI
TL;DR: In this article, the authors review recent progress and advances that have been made on: (a) dispersion of CNTs in a polymer matrix, including optimum blending, in situ polymerization and chemical functionalization; and (b) alignment of CNNs in the matrix enhanced by ex situ techniques, force and magnetic fields, electrospinning and liquid crystalline phase-induced methods.
Abstract: Polymer/carbon nanotube (CNT) composites are expected to have good processability characteristics of the polymer and excellent functional properties of the CNTs. The critical challenge, however, is how to enhance dispersion and alignment of CNTs in the matrix. Here, we review recent progress and advances that have been made on: (a) dispersion of CNTs in a polymer matrix, including optimum blending, in situ polymerization and chemical functionalization; and (b) alignment of CNTs in the matrix enhanced by ex situ techniques, force and magnetic fields, electrospinning and liquid crystalline phase-induced methods. In addition, discussions on mechanical, thermal, electrical, electrochemical, optical and super-hydrophobic properties; and applications of polymer/CNT composites are included. Enhanced dispersion and alignment of CNTs in the polymer matrix will promote and extend the applications and developments of polymer/CNT nanocomposites.

1,848 citations


Network Information
Related Topics (5)
Carbon nanotube
109K papers, 3.6M citations
95% related
Graphene
144.5K papers, 4.9M citations
93% related
Oxide
213.4K papers, 3.6M citations
92% related
Thin film
275.5K papers, 4.5M citations
90% related
Polymerization
147.9K papers, 2.7M citations
89% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
20237,400
202215,227
20215,776
20205,861
20195,771
20185,588