Topic
Natural fiber
About: Natural fiber is a research topic. Over the lifetime, 5402 publications have been published within this topic receiving 165550 citations. The topic is also known as: natural fibre.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, a review on the tensile properties of natural fiber reinforced polymer composites is presented, where several chemical modifications are employed to improve the interfacial matrix-fiber bonding resulting in the enhancement of tensile strength of the composites.
Abstract: This paper is a review on the tensile properties of natural fiber reinforced polymer composites. Natural fibers have recently become attractive to researchers, engineers and scientists as an alternative reinforcement for fiber reinforced polymer (FRP) composites. Due to their low cost, fairly good mechanical properties, high specific strength, non-abrasive, eco-friendly and bio-degradability characteristics, they are exploited as a replacement for the conventional fiber, such as glass, aramid and carbon. The tensile properties of natural fiber reinforce polymers (both thermoplastics and thermosets) are mainly influenced by the interfacial adhesion between the matrix and the fibers. Several chemical modifications are employed to improve the interfacial matrix–fiber bonding resulting in the enhancement of tensile properties of the composites. In general, the tensile strengths of the natural fiber reinforced polymer composites increase with fiber content, up to a maximum or optimum value, the value will then drop. However, the Young’s modulus of the natural fiber reinforced polymer composites increase with increasing fiber loading. Khoathane et al. [1] found that the tensile strength and Young’s modulus of composites reinforced with bleached hemp fibers increased incredibly with increasing fiber loading. Mathematical modelling was also mentioned. It was discovered that the rule of mixture (ROM) predicted and experimental tensile strength of different natural fibers reinforced HDPE composites were very close to each other. Halpin–Tsai equation was found to be the most effective equation in predicting the Young’s modulus of composites containing different types of natural fibers.
1,757 citations
TL;DR: In this paper, the authors review the recent progress in using silane coupling agents for NFPCs, summarizes the effective silane structures from the silane family, clarifies the interaction mechanisms between natural fibers and polymer matrices, and presents the effects of silane treatments on the mechanical and outdoor performance of the resulting composites.
Abstract: Natural fiber reinforced polymer composites (NFPCs) provide the customers with more alternatives in the material market due to their unique advantages. Poor fiber–matrix interfacial adhesion may, however, negatively affect the physical and mechanical properties of the resulting composites due to the surface incompatibility between hydrophilic natural fibers and non-polar polymers (thermoplastics and thermosets). A variety of silanes (mostly trialkoxysilanes) have been applied as coupling agents in the NFPCs to promote interfacial adhesion and improve the properties of composites. This paper reviews the recent progress in using silane coupling agents for NFPCs, summarizes the effective silane structures from the silane family, clarifies the interaction mechanisms between natural fibers and polymer matrices, and presents the effects of silane treatments on the mechanical and outdoor performance of the resulting composites.
1,725 citations
TL;DR: After mechanical treatments of cryocrushing, disintegration and defibrillation, the thermal properties of the nanofibers were studied by the TGA technique and found to increase dramatically and is reasonably promising for the use of these nanofiber types in reinforced-polymer manufacturing.
1,431 citations
TL;DR: In this article, the thermal properties, crystallinity index, reactivity, and surface morphology of untreated and chemically modified fibers have been studied using differential scanning calorimetry (DSC), X-ray diffraction (WAXRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM), respectively.
Abstract: Plant fibers are rich in cellulose and they are a cheap, easily renewable source of fibers with the potential for polymer reinforcement. The presence of surface impurities and the large amount of hydroxyl groups make plant fibers less attractive for reinforcement of polymeric materials. Hemp, sisal, jute, and kapok fibers were subjected to alkalization by using sodium hydroxide. The thermal characteristics, crystallinity index, reactivity, and surface morphology of untreated and chemically modified fibers have been studied using differential scanning calorimetry (DSC), X-ray diffraction (WAXRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM), respectively. Following alkalization the DSC showed a rapid degradation of the cellulose between 0.8 and 8% NaOH, beyond which degradation was found to be marginal. There was a marginal drop in the crystallinity index of hemp fiber while sisal, jute, and kapok fibers showed a slight increase in crystallinity at caustic soda concentration of 0.8–30%. FTIR showed that kapok fiber was found to be the most reactive followed by jute, sisal, and then hemp fiber. SEM showed a relatively smooth surface for all the untreated fibers; however, after alkalization, all the fibers showed uneven surfaces. These results show that alkalization modifies plant fibers promoting the development of fiber–resin adhesion, which then will result in increased interfacial energy and, hence, improvement in the mechanical and thermal stability of the composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2222–2234, 2002
1,396 citations
TL;DR: In this paper, a twin-screw extruder with flax fiber content of 30 and 40 wt.% was used to produce a composite material with high impact strength.
1,370 citations