Network switch

About: Network switch is a research topic. Over the lifetime, 7916 publications have been published within this topic receiving 104935 citations. The topic is also known as: switching hub & bridging hub.

DevoFlow: scaling flow management for high-performance networks

Abstract: OpenFlow is a great concept, but its original design imposes excessive overheads. It can simplify network and traffic management in enterprise and data center environments, because it enables flow-level control over Ethernet switching and provides global visibility of the flows in the network. However, such fine-grained control and visibility comes with costs: the switch-implementation costs of involving the switch's control-plane too often and the distributed-system costs of involving the OpenFlow controller too frequently, both on flow setups and especially for statistics-gathering.In this paper, we analyze these overheads, and show that OpenFlow's current design cannot meet the needs of high-performance networks. We design and evaluate DevoFlow, a modification of the OpenFlow model which gently breaks the coupling between control and global visibility, in a way that maintains a useful amount of visibility without imposing unnecessary costs. We evaluate DevoFlow through simulations, and find that it can load-balance data center traffic as well as fine-grained solutions, without as much overhead: DevoFlow uses 10--53 times fewer flow table entries at an average switch, and uses 10--42 times fewer control messages.

Improving network management with software defined networking

Abstract: Network management is challenging. To operate, maintain, and secure a communication network, network operators must grapple with low-level vendor-specific configuration to implement complex high-level network policies. Despite many previous proposals to make networks easier to manage, many solutions to network management problems amount to stop-gap solutions because of the difficulty of changing the underlying infrastructure. The rigidity of the underlying infrastructure presents few possibilities for innovation or improvement, since network devices have generally been closed, proprietary, and vertically integrated. A new paradigm in networking, software defined networking (SDN), advocates separating the data plane and the control plane, making network switches in the data plane simple packet forwarding devices and leaving a logically centralized software program to control the behavior of the entire network. SDN introduces new possibilities for network management and configuration methods. In this article, we identify problems with the current state-of-the-art network configuration and management mechanisms and introduce mechanisms to improve various aspects of network management. We focus on three problems in network management: enabling frequent changes to network conditions and state, providing support for network configuration in a highlevel language, and providing better visibility and control over tasks for performing network diagnosis and troubleshooting. The technologies we describe enable network operators to implement a wide range of network policies in a high-level policy language and easily determine sources of performance problems. In addition to the systems themselves, we describe various prototype deployments in campus and home networks that demonstrate how SDN can improve common network management tasks.

Voice over data telecommunications network architecture

Abstract: The present invention describes a system and method for communicating voice and data over a packet-switched network that is adapted to coexist and communicate with a legacy PSTN. The system permits packet switching of voice calls and data calls through a data network from and to any of a LEC, a customer facility or a direct IP connection on the data network. The system includes soft switch sites, gateway sites, a data network, a provisioning component, a network event component and a network management component. The system interfaces with customer facilities (e.g., a PBX), carrier facilities (e.g., a LEC) and legacy signaling networks (e.g., SS7) to handle calls between any combination of on-network and off-network callers. The soft switch sites provide the core call processing for the voice network architecture. The soft switch sites manage the gateway sites in a preferred embodiment, using a protocol such as the Internet Protocol Device Control (IPDC) protocol to request the set-up and tear-down of calls. The gateway sites originate and terminate calls between calling parties and called parties through the data network. The gateway sites include network access devices to provide access to network resources. The data network connects one or more of the soft switch sites to one or more of the gateway sites. The provisioning and network event component collects call events recorded at the soft switch sites. The network management component includes a network operations center (NOC) for centralized network management.

VL2: a scalable and flexible data center network

Abstract: To be agile and cost effective, data centers must allow dynamic resource allocation across large server pools. In particular, the data center network should provide a simple flat abstraction: it should be able to take any set of servers anywhere in the data center and give them the illusion that they are plugged into a physically separate, noninterfering Ethernet switch with as many ports as the service needs. To meet this goal, we present VL2, a practical network architecture that scales to support huge data centers with uniform high capacity between servers, performance isolation between services, and Ethernet layer-2 semantics. VL2 uses (1) flat addressing to allow service instances to be placed anywhere in the network, (2) Valiant Load Balancing to spread traffic uniformly across network paths, and (3) end system--based address resolution to scale to large server pools without introducing complexity to the network control plane. VL2's design is driven by detailed measurements of traffic and fault data from a large operational cloud service provider. VL2's implementation leverages proven network technologies, already available at low cost in high-speed hardware implementations, to build a scalable and reliable network architecture. As a result, VL2 networks can be deployed today, and we have built a working prototype. We evaluate the merits of the VL2 design using measurement, analysis, and experiments. Our VL2 prototype shuffles 2.7 TB of data among 75 servers in 395 s---sustaining a rate that is 94% of the maximum possible.

Reconfiguration of electric distribution networks for resistive line losses reduction

Abstract: The authors describe a heuristic method for the reconfiguration of distribution networks in order to reduce their resistive line losses under normal operating conditions. The proposed approach is characterized by convergence to the optimum or a near-optimum solution and the independence of the final solution from the initial status of the network switches. The methodology has been implemented in a production-grade computer program, DISTOP (Distribution Network Optimization). The compensation-based power flow technique developed at Pacific Gas and Electric Company for the efficient solution of weakly meshed distribution networks is an essential part of this loss reduction methodology. Important implementation aspects of the methodology and the results of its application to several realistic distribution networks are presented. Numerous test results have indicated that the proposed technique is computationally robust and efficient and, hence, suitable for both planning and operations studies. >