Topic
Nickel
About: Nickel is a(n) research topic. Over the lifetime, 79308 publication(s) have been published within this topic receiving 1210058 citation(s). The topic is also known as: Ni & element 28.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this article, a review of the key technological developments and scientific challenges for a broad range of Li-ion battery electrodes is presented, and the potential/capacity plots are used to compare many families of suitable materials.
Abstract: This review covers key technological developments and scientific challenges for a broad range of Li-ion battery electrodes. Periodic table and potential/capacity plots are used to compare many families of suitable materials. Performance characteristics, current limitations, and recent breakthroughs in the development of commercial intercalation materials such as lithium cobalt oxide (LCO), lithium nickel cobalt manganese oxide (NCM), lithium nickel cobalt aluminum oxide (NCA), lithium iron phosphate (LFP), lithium titanium oxide (LTO) and others are contrasted with that of conversion materials, such as alloying anodes (Si, Ge, Sn, etc.), chalcogenides (S, Se, Te), and metal halides (F, Cl, Br, I). New polyanion cathode materials are also discussed. The cost, abundance, safety, Li and electron transport, volumetric expansion, material dissolution, and surface reactions for each type of electrode materials are described. Both general and specific strategies to overcome the current challenges are covered and categorized.
3,696 citations
TL;DR: In this article, the authors report measurements of the oxide scale thickness and oxide grain size as a function of time during the oxidation of high-purity nickel in the temperature range 500-800°C.
Abstract: Below 1000°C the oxidation of nickel cannot be controlled by the diffusion of ions through the bulk crystal lattice of the pure oxide, because the measured oxidation rates are several orders of magnitude faster than would be predicted on this basis. Short-circuit diffusion through oxide grain boundaries or dislocations has usually been held responsible, but there has hitherto been no proper quantitative confirmation of this mechanism. We report measurements of the oxide scale thickness and oxide grain size as a function of time during the oxidation of high-purity nickel in the temperature range 500–800°C. All the oxidation experiments were carried out in pure oxygen at a pressure of one atmosphere. The measured parabolic oxidation rate constants have been compared with those calculated from grain boundary diffusion data obtained in our previous work, using a grain boundary diffusion model for the oxidation process. The quantitative agreement between measured and calculated oxidation rates shows c...
2,573 citations
TL;DR: The catalytically active Ni2P nanoparticles had among the highest HER activity of any non-noble metal electrocatalyst reported to date, producing H2(g) with nearly quantitative faradaic yield, while also affording stability in aqueous acidic media.
Abstract: Nanoparticles of nickel phosphide (Ni2P) have been investigated for electrocatalytic activity and stability for the hydrogen evolution reaction (HER) in acidic solutions, under which proton exchange membrane-based electrolysis is operational. The catalytically active Ni2P nanoparticles were hollow and faceted to expose a high density of the Ni2P(001) surface, which has previously been predicted based on theory to be an active HER catalyst. The Ni2P nanoparticles had among the highest HER activity of any non-noble metal electrocatalyst reported to date, producing H2(g) with nearly quantitative faradaic yield, while also affording stability in aqueous acidic media.
2,156 citations
01 Jan 1985
TL;DR: In this article, the authors describe the behavior of grain boundaries in a two-dimensional model ordered alloy and the effects of elastic anisotropy on the anomalious yield behavior of cubic ordered alloys.
Abstract: This book contains over 50 selections. Some of the titles are: Order-disorder behavior of grain boundaries in a two-dimensional model ordered alloy; Dislocation reactions at grain boundaries in Ll/sub 2/ ordered alloys; Creep cavitation in a nickel aluminide; Effects of elastic anisotropy on the anomalious yield behavior of cubic ordered alloys; and Processing technology for nickel aluminides.
2,121 citations
TL;DR: The synthesis of ultrathin nickel-iron layered double hydroxide nanoplates on mildly oxidized multiwalled carbon nanotubes (CNTs) induced the formation of NiFe-LDH, which exhibits higher electrocatalytic activity and stability for oxygen evolution than commercial precious metal Ir catalysts.
Abstract: Highly active, durable, and cost-effective electrocatalysts for water oxidation to evolve oxygen gas hold a key to a range of renewable energy solutions, including water-splitting and rechargeable metal–air batteries. Here, we report the synthesis of ultrathin nickel–iron layered double hydroxide (NiFe-LDH) nanoplates on mildly oxidized multiwalled carbon nanotubes (CNTs). Incorporation of Fe into the nickel hydroxide induced the formation of NiFe-LDH. The crystalline NiFe-LDH phase in nanoplate form is found to be highly active for oxygen evolution reaction in alkaline solutions. For NiFe-LDH grown on a network of CNTs, the resulting NiFe-LDH/CNT complex exhibits higher electrocatalytic activity and stability for oxygen evolution than commercial precious metal Ir catalysts.
1,993 citations