Noble metal

About: Noble metal is a research topic. Over the lifetime, 15113 publications have been published within this topic receiving 337947 citations.

Colloidal carbon spheres and their core/shell structures with noble-metal nanoparticles.

Abstract: Colloidal microand nanospheres have been of continuous research interest, since their intrinsic properties can be finely tuned by changing parameters such as diameter, chemical composition, bulk structure, and crystallinity. Up to now, they have found a broad range of applications in fields such as drug delivery, biodiagnostics, combinatorial synthesis, and photonic band-gap crystals (PBG). The success of these applications strongly depends on the availability of colloidal spheres with tightly controlled size and surface properties. However, until now, only amorphous silica and some colloidal polymer spheres can be routinely prepared with satisfactorily narrow size distributions. As-prepared colloidal nanoand microspheres usually have relatively inert surfaces, which make surface modification almost unavoidable before use as supports or templates.

Tailoring Surface Plasmons through the Morphology and Assembly of Metal Nanoparticles

Abstract: Metal nanoparticles can be used as building blocks for the formation of nanostructured materials. For the design of materials with specific (optical) properties, several approaches can be followed, even when starting from the very same basic units. In this article, a survey is provided of the optical properties of noble metal nanoparticles, specifically gold, silver, and their combinations, prepared in solution through colloid chemical methods. The optical properties are shown to be mainly influenced by the surface plasmon resonance of conduction electrons, the frequency of which is not only determined by the nature of the metal but also by a number of other parameters, such as particle size and shape, the presence of a capping shell on the particle surface, or the dielectric properties of the surrounding medium. Recent results showing how these various parameters affect the optical properties are reviewed. The results highlight the high degree of control that can now be achieved through colloid chemical synthesis.

A review of dry (CO2) reforming of methane over noble metal catalysts

Abstract: Dry (CO2) reforming of methane (DRM) is a well-studied reaction that is of both scientific and industrial importance. This reaction produces syngas that can be used to produce a wide range of products, such as higher alkanes and oxygenates by means of Fischer–Tropsch synthesis. DRM is inevitably accompanied by deactivation due to carbon deposition. DRM is also a highly endothermic reaction and requires operating temperatures of 800–1000 °C to attain high equilibrium conversion of CH4 and CO2 to H2 and CO and to minimize the thermodynamic driving force for carbon deposition. The most widely used catalysts for DRM are based on Ni. However, many of these catalysts undergo severe deactivation due to carbon deposition. Noble metals have also been studied and are typically found to be much more resistant to carbon deposition than Ni catalysts, but are generally uneconomical. Noble metals can also be used to promote the Ni catalysts in order to increase their resistance to deactivation. In order to design catalysts that minimize deactivation, it is necessary to understand the elementary steps involved in the activation and conversion of CH4 and CO2. This review will cover DRM literature for catalysts based on Rh, Ru, Pt, and Pd metals. This includes the effect of these noble metals on the kinetics, mechanism and deactivation of these catalysts.

Photochemical route for synthesizing atomically dispersed palladium catalysts

Abstract: Atomically dispersed noble metal catalysts often exhibit high catalytic performances, but the metal loading density must be kept low (usually below 0.5%) to avoid the formation of metal nanoparticles through sintering. We report a photochemical strategy to fabricate a stable atomically dispersed palladium-titanium oxide catalyst (Pd1/TiO2) on ethylene glycolate (EG)-stabilized ultrathin TiO2 nanosheets containing Pd up to 1.5%. The Pd1/TiO2 catalyst exhibited high catalytic activity in hydrogenation of C=C bonds, exceeding that of surface Pd atoms on commercial Pd catalysts by a factor of 9. No decay in the activity was observed for 20 cycles. More important, the Pd1/TiO2-EG system could activate H2 in a heterolytic pathway, leading to a catalytic enhancement in hydrogenation of aldehydes by a factor of more than 55.

Ag@AgCl: A Highly Efficient and Stable Photocatalyst Active under Visible Light

Abstract: Nanoparticles (NPs) of noble metals can strongly absorb visible light because of their plasmon resonance, which is greatly influenced by their morphology and size. The phenomenon of plasmon resonance gives rise to important applications such as colorimetric sensors, photovoltaic devices, photochromic devices, and photocatalysts. Noble metal NPs exhibit characteristic optical and physical properties that are substantially different from those of the corresponding bulk materials. In particular, silver NPs show efficient plasmon resonance in the visible region, which Awazu et al. recently utilized to develop a plasmonic photocatalyst. In their study, TiO2 was deposited on NPs consisting of a silver core covered with a silica (SiO2) shell to prevent oxidation of Ag by direct contact with TiO2. Under UV illumination, this plasmonic photocatalyst exhibits enhanced catalytic activity, which increases with decreasing thickness of the SiO2 shell. To enhance the activity of a plasmonic photocatalyst, it is desirable to deposit silver NPs directly onto the surface of an active dielectric substrate without a protective shell, because the near-field effect of the NPs will be more strongly felt by the substrate. Herein we show that such a photocatalyst can be obtained from silver chloride by exploiting its photosensitivity, and the resulting plasmonic photocatalyst is highly efficient and stable under visible-light illumination. Silver halides are photosensitive materials extensively used as source materials in photographic films. On absorbing a photon, a silver halide particle generates an electron and a hole, and subsequently the photogenerated electron combines with an Ag ion to form an Ag atom. Ultimately, a cluster of silver atoms is formed within a silver halide particle upon repeated absorption of photons. Due to this instability under sunlight, which provides the very basis for chemical photography, silver halides are seldom used as photocatalysts. Nevertheless, there have been reports that under UV/Vis illumination AgCl deposited on a conducting support photocatalyzes O2 production from water in the presence of a small excess of silver ions in solution, and that under UV illumination AgBr dispersed on a silica support photocatalyzes H2 production from CH3OH/H2O solution. [21] In their study on the AgBr/SiO2 photocatalyst, Kakuta et al. [21] observed that Ag species are formed on AgBr in the early stage of the reaction, and AgBr is not destroyed under successive UV illumination. As suggested by Kakuta et al., electron–hole separation may occur smoothly in the presence of Ag species, and the latter may catalyze H2 production from alcohol radicals formed by photo-induced holes. If so, silver NPs formed on silver halide particles might be expected to be a stable photocatalyst under visible-light illumination due to their plasmon resonance. This expectation led us to prepare a new photocatalyst active and stable under visible light, namely, AgCl particles with silver NPs formed on their surface, by first treating Ag2MoO4 with HCl to form AgCl powder and then reducing some Ag ions in the surface region of the AgCl particles to Ag species (for details, see the Experimental Section). For convenience, these are referred to as Ag@AgCl particles. The X-ray diffraction (XRD) pattern of the Ag@AgCl product clearly shows that the cubic phase of Ag with lattice constant a= 4.0861 A (JCPDS file: 65-2871) coexists with the cubic phase of AgCl with lattice constant a= 5.5491 A (JCPDS file: 31-1238; see Figure 1). Scanning electron microscopy (SEM) images of the Ag@AgCl product (Figure 2) reveal that silver NPs with diameters in the range of 20–150 nm are deposited on the surface of AgCl particles with diameters in the range of 0.2–1.3 mm. The UV/Vis diffuse-reflectance spectra of Ag@AgCl, AgCl, and N-doped TiO2 (used as reference photocatalyst) are compared in Figure 3. In contrast to AgCl and N-doped TiO2, Ag@AgCl has a strong adsorption in the visible region which is almost as strong as that in the UV region. This is attributed to the plasmon resonance of silver NPs deposited on AgCl particles. To evaluate the photooxidation capability of Ag@AgCl, we examined the decomposition of methylic orange (MO) dye in solution over the Ag@AgCl sample under visible-light irradiation as a function of time (Figure 4). For comparison, we also carried out decomposition of the MO dye in solution over the N-doped TiO2 reference photocatalyst under visible[*] P. Wang, Prof. Dr. B. Huang, X. Qin, Prof. X. Zhang, Dr. J. Wei State Key Lab of Crystal Materials Shandong University, Jinan 250100 (China) E-mail: bbhuang@sdu.edu.cn Homepage: http://www.icm.sdu.edu.cn/index.php