Noble metal

About: Noble metal is a research topic. Over the lifetime, 15113 publications have been published within this topic receiving 337947 citations.

Alkaline Polymer Electrolyte Fuel Cells Completely Free From Noble Metal Catalysts

Abstract: In recent decades, fuel cell technology has been undergoing revolutionary developments, with fundamental progress being the replacement of electrolyte solutions with polymer electrolytes, making the device more compact in size and higher in power density. Nowadays, acidic polymer electrolytes, typically Nafion, are widely used. Despite great success, fuel cells based on acidic polyelectrolyte still depend heavily on noble metal catalysts, predominantly platinum (Pt), thus increasing the cost and hampering the widespread application of fuel cells. Here, we report a type of polymer electrolyte fuel cells (PEFC) employing a hydroxide ion-conductive polymer, quaternary ammonium polysulphone, as alkaline electrolyte and nonprecious metals, chromium-decorated nickel and silver, as the catalyst for the negative and positive electrodes, respectively. In addition to the development of a high-performance alkaline polymer electrolyte particularly suitable for fuel cells, key progress has been achieved in catalyst tailoring: The surface electronic structure of nickel has been tuned to suppress selectively the surface oxidative passivation with retained activity toward hydrogen oxidation. This report of a H2–O2 PEFC completely free from noble metal catalysts in both the positive and negative electrodes represents an important advancement in the research and development of fuel cells.

Ordered Deposition of Inorganic Clusters from Micellar Block Copolymer Films

Abstract: A method is presented for generating quasiregular arrays of nanometer-sized noble metal and metal oxide clusters on flat substrates by the use of a polymer template. The approach is of general applicability to other metals and various oxides. In the first step, polymeric micelles with a polar core were generated by dissolution of poly(styrene)-block-poly(2-vinylpyridine) in toluene. These micelles were used as nanocompartments that were loaded with a defined amount of a metal precursor. The metal ions can be reduced in such a way that exactly one elemental or oxidic particle is formed in each micelle, where each particle is of equal size. By dipping a flat substrate into a dilute solution, a monolayer of the micelles was obtained whereby the embedded equally large particles became arranged in a mesoscopic quasihexagonal two-dimensional (2-D) lattice. Exposure to an oxygen plasma allowed removal of the polymer completely, leaving the naked metal particles firmly attached to the substrate in the same quasih...

Poly(vinyl pyrrolidone): a dual functional reductant and stabilizer for the facile synthesis of noble metal nanoplates in aqueous solutions

Abstract: Poly(vinyl pyrrolidone) (PVP) has been extensively used in the solution-phase synthesis of many types of colloidal particles, where it is mainly considered as a steric stabilizer or capping agent with a major role to protect the product from agglomeration. In a recent study, we discovered that the hydroxyl end groups of PVP could also serve as a very mild reductant for kinetically controlled synthesis of Ag nanoplates with yields as high as 75%. Here we further demonstrate that hydroxyl-terminated PVP is also a well-suited reductant for the aqueous synthesis of circular, triangular, and hexagonal nanoplates made of other noble metals including Pd, Au, and Pt. The reduction kinetics of a metal salt by the hydroxyl end groups of PVP can be maneuvered in at least two different ways to facilitate the evolution of plate morphology: (i) by adjusting the molar ratio of PVP to the salt precursor and (ii) by altering the molecular weight of PVP. Unlike previously reported studies of Ag and Au thin plates, light was found to have a negligible role in the present synthesis.

Renewable and metal-free carbon nanofibre catalysts for carbon dioxide reduction

Abstract: The efficient catalysis of the electrochemical reduction of carbon dioxide is an important industrial process, usually performed by noble metal catalysts. Here the authors report a metal-free carbon nanofibre-based catalyst operating with a negligible overpotential, high current density and long-term stability.

In Situ Exfoliated, Edge-Rich, Oxygen-Functionalized Graphene from Carbon Fibers for Oxygen Electrocatalysis.

Abstract: Metal-free electrocatalysts have been extensively developed to replace noble metal Pt and RuO2 catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in fuel cells or metal-air batteries. These electrocatalysts are usually deposited on a 3D conductive support (e.g., carbon paper or carbon cloth (CC)) to facilitate mass and electron transport. For practical applications, it is desirable to create in situ catalysts on the carbon fiber support to simplify the fabrication process for catalytic electrodes. In this study, the first example of in situ exfoliated, edge-rich, oxygen-functionalized graphene on the surface of carbon fibers using Ar plasma treatment is successfully prepared. Compared to pristine CC, the plasma-etched carbon cloth (P-CC) has a higher specific surface area and an increased number of active sites for OER and ORR. P-CC also displays good intrinsic electron conductivity and excellent mass transport. Theoretical studies show that P-CC has a low overpotential that is comparable to Pt-based catalysts, as a result of both defects and oxygen doping. This study provides a simple and effective approach for producing highly active in situ catalysts on a carbon support for OER and ORR.