Showing papers on "Nucleation published in 2018"

Uniform Lithium Nucleation/Growth Induced by Lightweight Nitrogen-Doped Graphitic Carbon Foams for High-Performance Lithium Metal Anodes

Abstract: The lithium metal anode has attracted soaring attention as an ideal battery anode. Unfortunately, nonuniform Li nucleation results in uncontrollable growth of dendritic Li, which incurs serious safety issues and poor electrochemical performance, hindering its practical applications. Herein, this study shows that uniform Li nucleation/growth can be induced by an ultralight 3D current collector consisting of in situ nitrogen-doped graphitic carbon foams (NGCFs) to realize suppressing dendritic Li growth at the nucleating stage. The N-containing functional groups guide homogenous growth of Li nucleus nanoparticles and the initial Li nucleus seed layer regulates the following well-distributed Li growth. Benefiting from such favorable Li growth behavior, superior electrochemical performance can be achieved as evidenced by the high Coulombic efficiency (≈99.6% for 300 cycles), large capacity (10 mA h cm-2 , 3140 mA h g-1NGCF-Li ), and ultralong lifespan (>1200 h) together with low overpotential (<25 mV at 3 mA cm-2 ); even under a high current density up to 10 mA cm-2 , it still displays low overpotential of 62 mV.

Crystal Growth of ZIF-8, ZIF-67, and Their Mixed-Metal Derivatives

Abstract: A facile method to produce zeolitic imidazolate frameworks (ZIF-8, ZIF-67, and solid–solution ZIFs (mixed Co and Zn)) is reported. ZIF crystals are produced via a reaction–diffusion framework (RDF) by diffusing an outer solution at a relatively high concentration of the 2-methyl imidazole linker (HmIm) into an agar gel matrix containing the metal ions (zinc(II) and/or cobalt(II)) at room temperature. Accordingly, a propagating supersaturation wave, initiated at the interface between the outer solution and the gel matrix, leads to a precipitation front with a gradient of crystal sizes ranging between 100 nm and 55 μm along the reaction tube. While the precipitation fronts of ZIF-8 and ZIF-67 travel the same distance for the same initial conditions, ZIF-8 crystals therein are consistently smaller than the ZIF-67 crystals due to the disparity of their rate of nucleation and growth. The effects of the temperature, the concentration of the reagents, and the thickness of the gel matrix on the growth of the ZIF ...

Crack nucleation in variational phase-field models of brittle fracture

Abstract: Phase-field models, sometimes referred to as gradient damage or smeared crack models, are widely used methods for the numerical simulation of crack propagation in brittle materials. Theoretical results and numerical evidences show that they can predict the propagation of a pre-existing crack according to Griffith’ criterion. For a one-dimensional problem, it has been shown that they can predict nucleation upon a critical stress, provided that the regularization parameter be identified with the material’s internal or characteristic length. In this article, we draw on numerical simulations to study crack nucleation in commonly encountered geometries for which closed-form solutions are not available. We use U- and V-notches to show that the nucleation load varies smoothly from that predicted by a strength criterion to that of a toughness criterion when the strength of the stress concentration or singularity varies. We present validation and verification numerical simulations for both types of geometries. We consider the problem of an elliptic cavity in an infinite or elongated domain to show that variational phase field models properly account for structural and material size effects. Our main claim, supported by validation and verification in a broad range of materials and geometries, is that crack nucleation can be accurately predicted by minimization of a nonlinear energy in variational phase field models, and does not require the introduction of ad-hoc criteria.

Atmospheric new particle formation and growth : review of field observations

Abstract: This review focuses on the observed characteristics of atmospheric newparticle formation (NPF) in different environments of the global troposphere. After a short introduction, wewill present a theoretical background that discusses themethods used to analyzemeasurement data on atmospheric NPF and the associated terminology.Wewill update on our current understanding of regionalNPF, i.e. NPF taking simultaneously place over large spatial scales, and complement that with a full review on reportedNPF and growth rates during regionalNPF events.Wewill shortly review atmospheric NPF taking place at sub-regional scales. Since the growth of newly-formed particles into larger sizes is of great current interest, wewill briefly discuss our observation-based understanding onwhich gaseous compounds contribute to the growth of newly-formed particles, andwhat implications this will have on atmospheric cloud condensation nuclei formation.Wewillfinish the reviewwith a summary of ourmain findings and future outlook that outlines the remaining research questions and needs for additionalmeasurements.

Phase Transition Control for High Performance Ruddlesden-Popper Perovskite Solar Cells

Abstract: Ruddlesden-Popper reduced-dimensional hybrid perovskite (RDP) semiconductors have attracted significant attention recently due to their promising stability and excellent optoelectronic properties. Here, the RDP crystallization mechanism in real time from liquid precursors to the solid film is investigated, and how the phase transition kinetics influences phase purity, quantum well orientation, and photovoltaic performance is revealed. An important template-induced nucleation and growth of the desired (BA)2 (MA)3 Pb4 I13 phase, which is achieved only via direct crystallization without formation of intermediate phases, is observed. As such, the thermodynamically preferred perpendicular crystal orientation and high phase purity are obtained. At low temperature, the formation of intermediate phases, including PbI2 crystals and solvate complexes, slows down intercalation of ions and increases nucleation barrier, leading to formation of multiple RDP phases and orientation randomness. These insights enable to obtain high quality (BA)2 (MA)3 Pb4 I13 films with preferentially perpendicular quantum well orientation, high phase purity, smooth film surface, and improved optoelectronic properties. The resulting devices exhibit high power conversion efficiency of 12.17%. This work should help guide the perovskite community to better control Ruddlesden-Popper perovskite structure and further improve optoelectronic and solar cell devices.

Diffusion-Controlled Epitaxy of Large Area Coalesced WSe2 Monolayers on Sapphire

Abstract: A multistep diffusion-mediated process was developed to control the nucleation density, size, and lateral growth rate of WSe2 domains on c-plane sapphire for the epitaxial growth of large area monolayer films by gas source chemical vapor deposition (CVD). The process consists of an initial nucleation step followed by an annealing period in H2Se to promote surface diffusion of tungsten-containing species to form oriented WSe2 islands with uniform size and controlled density. The growth conditions were then adjusted to suppress further nucleation and laterally grow the WSe2 islands to form a fully coalesced monolayer film in less than 1 h. Postgrowth structural characterization demonstrates that the WSe2 monolayers are single crystal and epitaxially oriented with respect to the sapphire and contain antiphase grain boundaries due to coalescence of 0° and 60° oriented WSe2 domains. The process also provides fundamental insights into the two-dimensional (2D) growth mechanism. For example, the evolution of doma...

Multiscale and Multistep Ordering of Flow-Induced Nucleation of Polymers.

Abstract: Flow-induced crystallization (FIC) is a typical nonequilibrium phase transition and a core industry subject for the largest group of commercially useful polymeric materials: semicrystalline polymers. A fundamental understanding of FIC can benefit the research of nonequilibrium ordering in matter systems and help to tailor the ultimate properties of polymeric materials. Concerning the crystallization process, flow can accelerate the kinetics by orders of magnitude and induce the formation of oriented crystallites like shish-kebab, which are associated with the major influences of flow on nucleation, that is, raised nucleation density and oriented nuclei. The topic of FIC has been studied for more than half a century. Recently, there have been many developments in experimental approaches, such as synchrotron radiation X-ray scattering, ultrafast X-ray detectors with a time resolution down to the order of milliseconds, and novel laboratory devices to mimic the severe flow field close to real processing condi...

Control of ice nucleation: freezing and antifreeze strategies

Abstract: Water freezing remains a perennial topic of great relevance to many important aspects of our lives; from the climate to human society and from economics to medicine, frozen water profoundly influences our living environment and life activities. There have been numerous publications on water freezing; however, confusion regarding the process of freezing remains. In this review, we mainly focused on the nucleation aspects of water freezing; in particular, we focused on the effect of the surface morphology and nanostructure of foreign bodies. This review covers the recent progress in ice nucleation and anti-freezing strategies within the framework of nucleation principles. In this regard, we first summarize the crystal nucleation theories. Due to high interfacial energy, ice crystallization is primarily controlled by heterogeneous nucleation events, because the homogeneous nucleation barrier of ice is extremely high. In addition to the interfacial energy, the interfacial morphology or nanostructure of foreign bodies plays a diverse role under different supercooling regimes due to the Gibbs-Thomson effect. This effect gives rise to the inverse homogeneous-like nucleation phenomenon, in which foreign bodies have little influence on the nucleation barrier. This ensures the accurate measurement of the nucleation barrier, critical size, and water-ice interfacial energy, in agreement with the latest studies based on a microemulsions approach, metadynamics, the mW model, etc. As a consequence, anti-freezing strategies can be implemented by reducing the nucleation rate through restriction of the contact area of the water/substrate interface, by increasing the heterogeneous nucleation barrier through modification of the interfacial properties of foreign particles, including the interfacial structure and the interaction between the water and foreign particles and by kink kinetics. Within this context, the anti-freezing mechanism of superhydrophobic substrates was reviewed. Therefore, it follows that by significantly reducing the contact area between the water and substrate, superhydrophobic materials can effectively reduce the heterogeneous nucleation rate. We hope that this review will provide a unified picture and guidance for future work on water freezing.

Cholesterol catalyses Aβ42 aggregation through a heterogeneous nucleation pathway in the presence of lipid membranes

Abstract: Alzheimer’s disease is a neurodegenerative disorder associated with the aberrant aggregation of the amyloid-β peptide. Although increasing evidence implicates cholesterol in the pathogenesis of Alzheimer’s disease, the detailed mechanistic link between this lipid molecule and the disease process remains to be fully established. To address this problem, we adopt a kinetics-based strategy that reveals a specific catalytic role of cholesterol in the aggregation of Aβ42 (the 42-residue form of the amyloid-β peptide). More specifically, we demonstrate that lipid membranes containing cholesterol promote Aβ42 aggregation by enhancing its primary nucleation rate by up to 20-fold through a heterogeneous nucleation pathway. We further show that this process occurs as a result of cooperativity in the interaction of multiple cholesterol molecules with Aβ42. These results identify a specific microscopic pathway by which cholesterol dramatically enhances the onset of Aβ42 aggregation, thereby helping rationalize the link between Alzheimer’s disease and the impairment of cholesterol homeostasis. Cholesterol embedded in lipid membranes strongly promotes the aggregation of Aβ42 that is associated with Alzheimer's disease. Now, a kinetic analysis has shown that the mechanism of action responsible for this effect involves the introduction of a heterogeneous nucleation pathway that enhances the primary nucleation rate of Aβ42 aggregation by up to 20-fold.

Controlling Nucleation in Lithium Metal Anodes.

Abstract: Rechargeable batteries are regarded as the most promising candidates for practical applications in portable electronic devices and electric vehicles. In recent decades, lithium metal batteries (LMBs) have been extensively studied due to their ultrahigh energy densities. However, short lifespan and poor safety caused by uncontrollable dendrite growth hinder their commercial applications. Besides, a clear understanding of Li nucleation and growth has not yet been obtained. In this Review, the failure mechanisms of Li metal anodes are ascribed to high reactivity of lithium, virtually infinite volume changes, and notorious dendrite growth. The principles of Li deposition nucleation and early dendrite growth are discussed and summarized. Correspondingly, four rational strategies of controlling nucleation are proposed to guide Li nucleation and growth. Finally, perspectives for understanding the Li metal deposition process and realizing safe and high-energy rechargeable LMBs are given.

Molecular nucleation mechanisms and control strategies for crystal polymorph selection.

Abstract: The formation of condensed (compacted) protein phases is associated with a wide range of human disorders, such as eye cataracts, amyotrophic lateral sclerosis, sickle cell anaemia and Alzheimer's disease. However, condensed protein phases have their uses: as crystals, they are harnessed by structural biologists to elucidate protein structures, or are used as delivery vehicles for pharmaceutical applications. The physiochemical properties of crystals can vary substantially between different forms or structures ('polymorphs') of the same macromolecule, and dictate their usability in a scientific or industrial context. To gain control over an emerging polymorph, one needs a molecular-level understanding of the pathways that lead to the various macroscopic states and of the mechanisms that govern pathway selection. However, it is still not clear how the embryonic seeds of a macromolecular phase are formed, or how these nuclei affect polymorph selection. Here we use time-resolved cryo-transmission electron microscopy to image the nucleation of crystals of the protein glucose isomerase, and to uncover at molecular resolution the nucleation pathways that lead to two crystalline states and one gelled state. We show that polymorph selection takes place at the earliest stages of structure formation and is based on specific building blocks for each space group. Moreover, we demonstrate control over the system by selectively forming desired polymorphs through site-directed mutagenesis, specifically tuning intermolecular bonding or gel seeding. Our results differ from the present picture of protein nucleation, in that we do not identify a metastable dense liquid as the precursor to the crystalline state. Rather, we observe nucleation events that are driven by oriented attachments between subcritical clusters that already exhibit a degree of crystallinity. These insights suggest ways of controlling macromolecular phase transitions, aiding the development of protein-based drug-delivery systems and macromolecular crystallography.

Building two-dimensional materials one row at a time: Avoiding the nucleation barrier.

Abstract: Assembly of two-dimensional (2D) molecular arrays on surfaces produces a wide range of architectural motifs exhibiting unique properties, but little attention has been given to the mechanism by which they nucleate. Using peptides selected for their binding affinity to molybdenum disulfide, we investigated nucleation of 2D arrays by molecularly resolved in situ atomic force microscopy and compared our results to molecular dynamics simulations. The arrays assembled one row at a time, and the nuclei were ordered from the earliest stages and formed without a free energy barrier or a critical size. The results verify long-standing but unproven predictions of classical nucleation theory in one dimension while revealing key interactions underlying 2D assembly.

XMAP215 is a microtubule nucleation factor that functions synergistically with the γ-tubulin ring complex.

Abstract: How microtubules (MTs) are generated in the cell is a major question in understanding how the cytoskeleton is assembled. For several decades, γ-tubulin has been accepted as the universal MT nucleator of the cell. Although there is evidence that γ-tubulin complexes are not the sole MT nucleators, identification of other nucleation factors has proven difficult. Here, we report that the well-characterized MT polymerase XMAP215 (chTOG/Msps/Stu2p/Alp14/Dis1 homologue) is essential for MT nucleation in Xenopus egg extracts. The concentration of XMAP215 determines the extent of MT nucleation. Even though XMAP215 and the γ-tubulin ring complex (γ-TuRC) possess minimal nucleation activity individually, together, these factors synergistically stimulate MT nucleation in vitro. The amino-terminal TOG domains 1-5 of XMAP215 bind to αβ-tubulin and promote MT polymerization, whereas the conserved carboxy terminus is required for efficient MT nucleation and directly binds to γ-tubulin. In summary, XMAP215 and γ-TuRC together function as the principal nucleation module that generates MTs in cells.

Heterogeneous to homogeneous melting transition visualized with ultrafast electron diffraction

Abstract: The ultrafast laser excitation of matters leads to nonequilibrium states with complex solid-liquid phase-transition dynamics. We used electron diffraction at mega–electron volt energies to visualize the ultrafast melting of gold on the atomic scale length. For energy densities approaching the irreversible melting regime, we first observed heterogeneous melting on time scales of 100 to 1000 picoseconds, transitioning to homogeneous melting that occurs catastrophically within 10 to 20 picoseconds at higher energy densities. We showed evidence for the heterogeneous coexistence of solid and liquid. We determined the ion and electron temperature evolution and found superheated conditions. Our results constrain the electron-ion coupling rate, determine the Debye temperature, and reveal the melting sensitivity to nucleation seeds.

Uniform Nucleation of Lithium in 3D Current Collectors via Bromide Intermediates for Stable Cycling Lithium Metal Batteries.

Abstract: The conductive framework is generating considerable interest for lithium metal anodes to accommodate Li+ deposition, due to its ability to reduce electrode current density by increasing the deposition area. However, in most cases, the electroactive surface area is not fully utilized for the nucleation of Li in 3D current collectors, especially under high current densities. Herein, uniform nucleation of Li in the conductive skeleton is achieved by a two-step synergetic process arising from CuBr- and Br-doped graphene-like film. The modified electrode regulates Li nucleating in uniform pancake-like seeds and growing into a granular Li metal ascribed to the excellent lithiophilicity of CuBr- and Br-doping sites and the low Li diffusion barrier on the surface of generated LiBr, as confirmed by the experimental and computational results. Therefore, the modified anode endows small nucleation overpotential, a high-reversibility Li plating/stripping process, and excellent performance in full batteries with indust...