Showing papers on "Optical communication published in 2015"
TL;DR: In this article, the Dammann optical vortex gratings (DOVGs) are used to realize multiplexing based on the generation, transmission and detection of optical angular momentum (OAM).
Abstract: Data transmission rates in optical communication systems are approaching the limits of conventional multiplexing methods. Orbital angular momentum (OAM) in optical vortex beams offers a new degree of freedom and the potential to increase the capacity of free-space optical communication systems, with OAM beams acting as information carriers for OAM division multiplexing (OAM-DM). We demonstrate independent collinear OAM channel generation, transmission and simultaneous detection using Dammann optical vortex gratings (DOVGs). We achieve 80/160 Tbit s−1 capacity with uniform power distributions along all channels, with 1600 individually modulated quadrature phase-shift keying (QPSK)/16-QAM data channels multiplexed by 10 OAM states, 80 wavelengths and two polarizations. DOVG-enabled OAM multiplexing technology removes the bottleneck of massive OAM state parallel detection and offers an opportunity to raise optical communication systems capacity to Pbit s−1 level. Dammann gratings are used to realize multiplexing based on the generation, transmission and detection of optical angular momentum (OAM). The OAM of optical vortex beams offers a new degree of freedom for multiplexing and hence the promise of higher data communication rates, but massive parallel detection of OAM states has proved challenging. Now, researchers in China, Australia and Singapore have used Dammann optical vortex gratings (DOVGs) to realize multiplexing of massive OAM channels with individual modulation and simultaneous detection capabilities. They achieved a data capacity of 80 Tbit s−1 by multiplexing 1600 channels using ten OAM states, 80 wavelengths and two polarizations. This DOVG-enabled OAM multiplexing technology removes the bottleneck of massive parallel detection of OAM states and has the potential to increase optical communication capacities to the Pbit s−1 level.
412 citations
TL;DR: This work investigates the communication capabilities of off-the-shelf LDs in a number of scenarios with illumination constraints and indicates that optical wireless access data rates in the excess of 100 Gb/s are possible at standard indoor illumination levels.
Abstract: Potential visible light communication (VLC) data rates at over 10 Gb/s have been recently demonstrated using light emitting diodes (LEDs). The disadvantage is, LEDs have an inherent trade-off between optical efficiency and bandwidth. Consequently, laser diodes (LDs) can be considered as a very promising alternative for better utilization of the visible light spectrum for communication purposes. This work investigates the communication capabilities of off-the-shelf LDs in a number of scenarios with illumination constraints. The results indicate that optical wireless access data rates in the excess of 100 Gb/s are possible at standard indoor illumination levels.
321 citations
Book•
12 Mar 2015TL;DR: This book provides a comprehensive analysis of information rate-, spectral- and power-efficiencies for single and multi-carrier transmission schemes, and a novel analysis of non-linear signal distortion, enabling the use of off-the-shelf LED technology.
Abstract: Balancing theoretical analysis and practical advice, this book describes all the underlying principles required to build high performance indoor optical wireless communication (OWC) systems based on visible and infrared light, alongside essential techniques for optimising systems by maximising throughput, reducing hardware complexity and measuring performance effectively. It provides a comprehensive analysis of information rate-, spectral- and power-efficiencies for single and multi-carrier transmission schemes, and a novel analysis of non-linear signal distortion, enabling the use of off-the-shelf LED technology. Other topics covered include cellular network throughput and coverage, static resource partitioning via dynamic interference-aware scheduling, realistic light propagation modelling, OFDM, optical MIMO transmission and nonlinearity modelling. Covering practical techniques for building indoor optical wireless cellular networks supporting multiple users and guidelines for 5G cellular system studies, in addition to physical layer issues, this is an indispensable resource for academic researchers, professional engineers and graduate students working in optical communications.
308 citations
TL;DR: In this article, the capacity limits of the orbital angular momentum multiplexing for free-space optical communication were revealed, and it was shown that it is not an optimal technique for realizing the capacity limit of a free space communication channel.
Abstract: Limits of orbital-angular-momentum multiplexing for free-space optical communication are revealed. Increasing the information capacity per unit bandwidth has been a perennial goal of scientists and engineers1. Multiplexing of independent degrees of freedom, such as wavelength, polarization and more recently space, has been a preferred method to increase capacity2,3 in both radiofrequency and optical communication. Orbital angular momentum, a physical property of electromagnetic waves discovered recently4, has been proposed as a new degree of freedom for multiplexing to achieve capacity beyond conventional multiplexing techniques5,6,7,8,9, and has generated widespread and significant interest in the scientific community10,11,12,13,14. However, the capacity of orbital angular momentum multiplexing has not been established or compared to other multiplexing techniques. Here, we show that orbital angular momentum multiplexing is not an optimal technique for realizing the capacity limits of a free-space communication channel15,16,17 and is outperformed by both conventional line-of-sight multi-input multi-output transmission and spatial-mode multiplexing.
230 citations
TL;DR: A planar chiral antenna array is experimentally demonstrated to produce optical vortex from a circularly polarized light and has the ability to focus the incident light into point, which greatly increases the power intensity of the generated optical vortex.
Abstract: Data capacity is rapidly reaching its limit in modern optical communications. Optical vortex has been explored to enhance the data capacity for its extra degree of freedom of angular momentum. In traditional means, optical vortices are generated using space light modulators or spiral phase plates, which would sharply decrease the integration of optical communication systems. Here we experimentally demonstrate a planar chiral antenna array to produce optical vortex from a circularly polarized light. Furthermore, the antenna array has the ability to focus the incident light into point, which greatly increases the power intensity of the generated optical vortex. This chiral antenna array may have potential application in highly integrated optical communication systems.
181 citations
TL;DR: The communication between two legitimate peers in the presence of an external eavesdropper is studied from a physical-layer security perspective in the context of free-space optical (FSO) communications and viable mechanisms to eavesdrop are discussed.
Abstract: The communication between two legitimate peers in the presence of an external eavesdropper is studied from a physical-layer security perspective in the context of free-space optical (FSO) communications. We discuss viable mechanisms to eavesdrop the communication and study the effect of random optical irradiance fluctuations inherent to FSO communications on the probability of achieving a secure transmission. We observe that the joint effect of laser-beam divergence and turbulence-induced fading on the received irradiance, under certain conditions, allows an external eavesdropper close to the legitimate receiver to compromise the communication. Interestingly, we also observe that an eavesdropper placed close to the legitimate transmitter can easily compromise the communication by taking advantage of the larger attenuation suffered by the signal when propagating through the FSO link.
152 citations
TL;DR: In this article, the frequency mixing between orthogonal polarization modes in a compact integrated microring resonator and demonstrate a bi-chromatically pumped optical parametric oscillator is demonstrated.
Abstract: Nonlinear optical processes are one of the most important tools in modern optics with a broad spectrum of applications in, for example, frequency conversion, spectroscopy, signal processing and quantum optics. For practical and ultimately widespread implementation, on-chip devices compatible with electronic integrated circuit technology offer great advantages in terms of low cost, small footprint, high performance and low energy consumption. While many on-chip key components have been realized, to date polarization has not been fully exploited as a degree of freedom for integrated nonlinear devices. In particular, frequency conversion based on orthogonally polarized beams has not yet been demonstrated on chip. Here we show frequency mixing between orthogonal polarization modes in a compact integrated microring resonator and demonstrate a bi-chromatically pumped optical parametric oscillator. Operating the device above and below threshold, we directly generate orthogonally polarized beams, as well as photon pairs, respectively, that can find applications, for example, in optical communication and quantum optics.
149 citations
TL;DR: In this article, a planar plasmonic metamaterial (PPLS) was proposed for optical data processing, which has summator, inverter and small-signal amplifier functions.
Abstract: Although vast amounts of information are conveyed by photons in optical fibers, the majority of data processing is performed electronically, creating the infamous ‘information bottleneck’ and consuming energy at an increasingly unsustainable rate. The potential for photonic devices to directly manipulate light remains unfulfilled due largely to a lack of materials with strong, fast optical nonlinearities. In this paper, we show that small-signal amplifier, summator and invertor functions for optical signals may be realized using a four-port device that exploits the coherent interaction of beams on a planar plasmonic metamaterial, assuming no intrinsic nonlinearity. The redistribution of energy among ports can provide nonlinear input-output signal dependencies and may be coherently controlled at very low intensity levels, with multi-THz bandwidth and without introducing signal distortion, thereby presenting powerful opportunities for novel optical data processing architectures, complexity oracles and the locally coherent networks that are becoming part of the mainstream telecommunications agenda. An all-optical device based on a planar plasmonic metamaterial is proposed that has summator, inverter and small-signal amplifier functions. Optical processing of optical data signals is strongly needed to overcome the ‘electronic bottleneck’ in current optical communication systems. Now, researchers at the University of Southampton in the UK and Nanyang Technological University in Singapore have theoretically demonstrated the feasibility of exploiting the coherent interaction of light beams in an ultrathin (substantially subwavelength) plasmonic metamaterial to achieve this. As the proposed device does not use nonlinear optical media, it should be possible to operate it at very low power levels. The energy redistribution between the four ports of the device can provide nonlinear input-output signal dependencies and may be controlled at very low intensity levels with multi-terahertz bandwidth and without distorting the signal.
133 citations
TL;DR: In this paper, the authors review the work on heterogeneous III-V-on-silicon photonic components and circuits for applications in optical communication and sensing and elaborate on the integration strategy and describe a broad range of devices realized on this platform.
Abstract: In the paper, we review our work on heterogeneous III-V-on-silicon photonic components and circuits for applications in optical communication and sensing. We elaborate on the integration strategy and describe a broad range of devices realized on this platform covering a wavelength range from 850 nm to 3.85 μm.
131 citations
TL;DR: The design and fabrication of integrated transmitter and receiver components are reported and a preliminary result of a MIMO system implementation operating at a data rate of 1 Gbps is demonstrated.
Abstract: Visible light communications (VLC) has the potential to play a major part in future smart home and next generation communication networks. There is significant ongoing work to increase the achievable data rates using VLC, to standardize it and integrate it within existing network infrastructures. The future of VLC systems depends on the ability to fabricate low cost transceiver components and to realize the promise of high data rates. This paper reports the design and fabrication of integrated transmitter and receiver components. The transmitter uses a two dimensional individually addressable array of micro light emitting diodes ( $\mu\text{LEDs}$ )and the receiver uses an integrated photodiode array fabricated in a CMOS technology. A preliminary result of a MIMO system implementation operating at a data rate of 1 Gbps is demonstrated. This paper also highlights the challenges in achieving highly parallel data communication along with the possible bottlenecks in integrated approaches.
119 citations
TL;DR: The potentials and challenges of using orbital angular momentum multiplexed optical transmission and optical device technologies in optical interconnect applications scenarios to meet above requirements are discussed.
Abstract: Ultra-short- and short-reach optical interconnects are the new high growth applications for optical communications. High capacity density, high spectral efficiency, low cost, low power consumption, and fast configurability are some of the key requirements for potential optical transmission technology candidates. Based on recent progress in orbital angular momentum multiplexed optical transmission and optical device technologies, this paper discusses the potentials and challenges of using orbital angular momentum multiplexing in optical interconnect applications scenarios to meet above requirements.
TL;DR: In this article, an in-line, all-optical fiber modulator based on a stereo graphene-microfiber structure (GMF) utilizing the lab-on-rod technique was demonstrated.
Abstract: An in-line, all-optical fiber modulator based on a stereo graphene–microfiber structure (GMF) utilizing the lab-on-rod technique was demonstrated in this study. Owing to its unique spring-like geometry, an ultra-long GMF interaction can be achieved, and a modulation depth of ∼7.5 dB (∼2.5 dB) and a modulation efficiency of ∼0.2 dB mW−1 (∼0.07 dB mW−1) were demonstrated for two polarization states. The modulation depth and modulation efficiency are more than one order of magnitude larger than those of other graphene–microfiber hybrid all-optical modulators, although at the cost of a higher insertion loss. By further optimizing the transferring and cleaning process, the upper limit of the modulation depth is mainly determined by the loss from the intrinsic absorption, which depends on the light–graphene interaction. Then, the modulator can quickly switch between the on-state and the off-state with a theoretically maximized modulation depth of tens of decibels. This modulator is compatible with the current fiber-optic communication systems and may be applied in the near future to meet the impending need for ultrafast optical signal processing. A polarization-sensitive all-optical fiber modulator based on a graphene–microfiber structure has been demonstrated by researchers in China. All-optical modulators with high modulation speeds, sufficient modulation depth and wide optical bandwidth are needed to realize ultrafast optical signal processing. Now, Fei Xu and co-workers at Nanjing University have fabricated an all-optical fiber modulator whose modulation depth and efficiency are more than ten times greater than previous all-optical modulators based on graphene and microfibers. These properties originate from its very long interaction length resulting from its spring-like geometry. The researchers consider that even better performance can be achieved by using higher quality graphene and improving the transfer and wrapping of the graphene in the fabrication process. Since the modulator is compatible with existing fiber-optic communication systems, it may find rapid application for ultrafast optical signal processing.
TL;DR: This paper proposes and demonstrates a VLC link using a CMOS mobile phone camera as Rx and shows that significant improvement of bit error rate (BER) for about an order of magnitude under different illuminances can be achieved.
Abstract: Visible light communication (VLC) is attractive as a supplementary method for future fifth-generation (5G) wireless communication owing to the shortage of radio-frequency bandwidth in conventional wireless communications. The VLC systems reported in the literature are mainly based on PIN receivers (Rxs). It is highly desirable if these VLC signals can be detected by using built-in complementary metal-oxide-semiconductor (CMOS) cameras as Rxs to provide flexible and low-cost wireless communications. However, using the CMOS camera is challenging. In this paper, we propose and demonstrate a VLC link using a CMOS mobile phone camera as Rx. By using the rolling shutter effect of the CMOS sensor, the VLC data rate can be significantly enhanced. We first use a second-order polynomial fitting to mitigate the “blooming effect” (saturation of pixels) of the CMOS sensor. In order to extend the VLC transmission distance and mitigate the influence of the background noise, we also propose and demonstrate using histogram equalization and Sobel filter to enhance VLC signal performance. Finally, a third-order polynomial fitting is used to define the threshold. The experimental results show that significant improvement of bit error rate (BER) for about an order of magnitude under different illuminances can be achieved.
TL;DR: An integral expression for system error probability is obtained for both uplink and downlink schemes under a specific channel model expressed in this paper, among many channel models in underwater optical communication systems.
Abstract: In this paper, we introduce and investigate a cellular underwater wireless optical code division multiple-access (OCDMA) network based on optical orthogonal codes (OOC). The structures, principles, and performance of the underwater wireless OCDMA network in various water types are presented. Since underwater wireless optical links are considered for high-bandwidth underwater communications at short ranges, we will place a set of optical base transceiver stations (OBTS) each in the center of a hexagonal cell to cover a larger underwater area. The OBTSs are connected via fiber optic to an optical network controller (ONC) which operates as the core of the network. An integral expression for system error probability is obtained for both uplink and downlink schemes under a specific channel model expressed in this paper, among many channel models in underwater optical communication systems. Furthermore, an experimental prototype of underwater an OCDMA system including the OBTS, ONC, transmitters, and receivers are implemented using field programmable gate arrays (FPGA).
TL;DR: This work demonstrates a cascaded optical transparency scheme by leveraging the parametric phonon-phonon coupling in a multimode optomechanical system, where a low damping mechanical mode in the unresolved-sideband regime is made to couple to an intermediate, high-frequency mechanical modes in the resolved-side band regime of an optical cavity.
Abstract: Optical delay is essential to classical and quantum optical communication. Here, the authors realize prolonged optical delay with cascaded of electromagnetically induced transparency by integrating phonon–phonon and optomechanical coupling in a single on-chip device.
TL;DR: This proof-of-concept demonstration shows how integration with phase-change materials can transform widespread phosphorescent materials into high-speed optical sources that can be integrated in monolithic nanoscale devices for both free-space and on-chip communication.
Abstract: Modulation is a cornerstone of optical communication, and as such, governs the overall speed of data transmission. Currently, the two main strategies for modulating light are direct modulation of the excited emitter population (for example, using semiconductor lasers) and external optical modulation (for example, using Mach–Zehnder interferometers or ring resonators). However, recent advances in nanophotonics offer an alternative approach to control spontaneous emission through modifications to the local density of optical states. Here, by leveraging the phase-change of a vanadium dioxide nanolayer, we demonstrate broadband all-optical direct modulation of 1.5mm emission from trivalent erbium ions more than three orders of magnitude faster than their excited state lifetime. This proof-of-concept demonstration shows how integration with phase-change materials can transform widespread phosphorescent materials into high-speed optical sources that can be integrated in monolithic nanoscale devices for both free-space and on-chip communication.
TL;DR: Results show that the wet road surface can help to increase the received optical power and improve the BER performance above a certain distance, and the communications coverage range can reach up to 70 m at a data rate of 50 Mbps when a photodetector is mounted on the car at a height of 0–0.2 m above the road surface.
Abstract: This paper presents an analytical performance analysis of a car-to-car visible light communications system under different communication geometries during the daytime. A market-weighted headlamp beam-pattern model, measured dirt effects on light distribution, and the road-surface reflection model are employed. We consider both the line-of-sight and non-line-of-sight links and outline the relationship between the communication range and the system bit error rate (BER) performance. Results show that the wet road surface can help to increase the received optical power and improve the BER performance above a certain distance, and the communications coverage range can reach up to 70 m at a data rate of 50 Mbps when a photodetector is mounted on the car at a height of 0–0.2 m above the road surface.
TL;DR: Simulations indicate that PIAs could reach data rate x reach products in excess of 14,000 Tb/s × km in realistic wavelength-division multiplexed long-haul networks, and technical challenges remaining to be addressed in order for fiber OPAs to become useful for long- haul communication networks are discussed.
Abstract: The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase-insensitive amplifiers (PIAs) and phase-sensitive amplifiers (PSAs) are considered. Low-penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength- and time-division multiplexed formats. High-quality mid-span spectral inversion has been demonstrated at 0.64 Tb/s, avoiding electronic dispersion compensation. All-optical amplitude regeneration of amplitude-modulated signals has been performed, while PSAs have been used to demonstrate phase regeneration of phase-modulated signals. A PSA with 1.1-dB noise figure has been demonstrated, and preliminary wavelength-division multiplexing experiments have been performed with PSAs. 512 Gb/s have been transmitted over 6,000 km by periodic phase conjugation. Simulations indicate that PIAs could reach data rate x reach products in excess of 14,000 Tb/s × km in realistic wavelength-division multiplexed long-haul networks. Technical challenges remaining to be addressed in order for fiber OPAs to become useful for long-haul communication networks are discussed.
TL;DR: Different advanced modulation formats and components suitable for SR-ONs, the impairments induced by all kinds of defects and bandwidth limitation of opto-electronic components and the corresponding compensation techniques based on DSP algorithms have been discussed and demonstrated.
Abstract: Besides the long-haul optical networks covering over thousands of kilometers for backbone transmission, short reach optical networks (SR-ONs) are widely deployed in metro-area for aggregation and accessing. The SR-ONs include the metro optical transport networks (Metro-OTN), optical access networks or other optical inter-connection systems with even shorter distance. As predicted, the growing bandwidth demanding from SR-ONs will be much more than that from the long-haul optical networks in the near future. Besides, there are tremendous amounts of optical terminals and end-users in SR-ONs compared with the long-haul transmission systems and thus will induce large cost and huge energy consumption. So, the power and cost efficiency should be the key consideration for SR-ONs besides the transmission performance. To improve the power and cost efficiency in SR-ONs, advanced modulations and detection techniques based on low power, low cost and integrated optical modulators should be utilized. In this paper, different advanced modulation formats have been discussed. 56Gbps PAM4, 112Gbps poly-binary and 100Gbps DMT that can be used to realize 400-Gbps SR-ONs for different applications have also been demonstrated respectively. In addition, low-cost and low-power opto-electronic components suitable for SR-ONs, the impairments induced by all kinds of defects and bandwidth limitation of opto-electronic components and the corresponding compensation techniques based on DSP algorithms have also been discussed in the experiments.
Posted Content•
TL;DR: In this article, the performance of relay-assisted underwater wireless optical code division multiple access (OCDMA) networks over turbulent channels is characterized. But the authors do not consider optical turbulence as a log-normal fading coefficient in their analysis.
Abstract: In this paper, we characterize the performance of relay-assisted underwater wireless optical code division multiple access (OCDMA) networks over turbulent channels. In addition to scattering and absorption effects of underwater channels, we also consider optical turbulence as a log-normal fading coefficient in our analysis. To simultaneously and asynchronously share medium among many users, we assign a unique optical orthogonal code (OOC) to each user in order to actualize OCDMA-based underwater network. The most significant challenge in underwater optical communication is in the ability to extend the short range of its coverage. In order to expand the viable communication range, we consider multi-hop transmission to the destination. Moreover, we evaluate the performance of a relay-assisted point-to-point UWOC system as a special case of the proposed relay-assisted OCDMA network. Our numerical results indicate significant performance improvement by employing intermediate relays, e.g., one can achieve $32$ {dB} improvement in the bit error rate (BER) of $10^{-6}$ using only a dual-hop transmission in a $90$ {m} point-to-point clear ocean link.
TL;DR: In this paper, a 4Gbit/s VLC system using coherent blue-laser diode (LD) via 16-quadrature amplitude modulation orthogonal frequency division multiplexing was presented.
Abstract: Visible Light Communication (VLC) as a new technology for ultrahigh-speed communication is still limited when using slow modulation light-emitting diode (LED). Alternatively, we present a 4-Gbit/s VLC system using coherent blue-laser diode (LD) via 16-quadrature amplitude modulation orthogonal frequency division multiplexing. By changing the composition and the optical-configuration of a remote phosphor-film the generated white light is tuned from cool day to neutral, and the bit error rate is optimized from 1.9 × 10(-2) to 2.8 × 10(-5) in a blue filter-free link due to enhanced blue light transmission in forward direction. Briefly, blue-LD is an alternative to LED for generating white light and boosting the data rate of VLC.
TL;DR: In this article, a nonlinear optical selection rule based on valley-exciton locking was proposed for 2D valley-polarized THz sources with 2p-1s transitions, optical switches and coherent control for quantum computing.
Abstract: Optical selection rules fundamentally determine the optical transitions between energy states in a variety of physical systems, from hydrogen atoms to bulk crystals such as gallium arsenide. These rules are important for optoelectronic applications such as lasers, energy-dispersive X-ray spectroscopy, and quantum computation. Recently, single-layer transition metal dichalcogenides have been found to exhibit valleys in momentum space with nontrivial Berry curvature and excitons with large binding energy. However, there has been little study of how the unique valley degree of freedom combined with the strong excitonic effect influences the nonlinear optical excitation. Here, we report the discovery of nonlinear optical selection rules in monolayer WS2, an important candidate for visible 2D optoelectronics because of its high quantum yield and large direct bandgap. We experimentally demonstrated this principle for second-harmonic generation and two-photon luminescence (TPL). Moreover, the circularly polarized TPL and the study of its dynamics evince a sub-ps interexciton relaxation (2p → 1s). The discovery of this new optical selection rule in a valleytronic 2D system not only considerably enhances knowledge in this area but also establishes a foundation for the control of optical transitions that will be crucial for valley optoelectronic device applications such as 2D valley-polarized THz sources with 2p–1s transitions, optical switches, and coherent control for quantum computing. An optical selection rule based on valley-exciton locking for nonlinear optical effects monolayer tungsten disulfide (WS2) is demonstrated. Optical selection rules derived from symmetry considerations control many light-based phenomena and applications. However, the effect of the combination of valley degree of freedom and strong excitonic effects on nonlinear optical excitation has not been extensively studied. Now, by considering energy valleys in momentum space, Xiang Zhang and co-workers at the University of California at Berkeley, have derived an optical selection rule for nonlinear optical effects of WS2, an important material for optoelectronic applications. They experimentally demonstrated the rule for second-harmonic generation and two-photon luminescence. This optical selection rule for a two-dimensional valleytronic system provides an important foundation for controlling optical transitions in applications of valley optoelectronics.
TL;DR: Using the OAM and nondiffracting characteristics of Bessel beams, 12 m distance obstruction-free optical m-ary coding/decoding is experimentally demonstrated using visible Bessel beam in a free-space optical communication system and the bit error rate (BER) performance of hexadecimal and 32-ary codes based on Besselbeam with different topological numbers is studied.
Abstract: Bessel beams carrying orbital angular momentum (OAM) with helical phase fronts exp(ilφ)(l=0;±1;±2;…), where φ is the azimuthal angle and l corresponds to the topological number, are orthogonal with each other. This feature of Bessel beams provides a new dimension to code/decode data information on the OAM state of light, and the theoretical infinity of topological number enables possible high-dimensional structured light coding/decoding for free-space optical communications. Moreover, Bessel beams are nondiffracting beams having the ability to recover by themselves in the face of obstructions, which is important for free-space optical communications relying on line-of-sight operation. By utilizing the OAM and nondiffracting characteristics of Bessel beams, we experimentally demonstrate 12 m distance obstruction-free optical m-ary coding/decoding using visible Bessel beams in a free-space optical communication system. We also study the bit error rate (BER) performance of hexadecimal and 32-ary coding/decoding based on Bessel beams with different topological numbers. After receiving 500 symbols at the receiver side, a zero BER of hexadecimal coding/decoding is observed when the obstruction is placed along the propagation path of light.
TL;DR: Here it is demonstrated theoretically and experimentally that a small, simple, spatially homogeneous dielectric subwavelength sphere with a high refractive index and low losses exhibits properties allowing to utilize it as a new multifunctional element for the mentioned devices.
Abstract: The future of ultra-fast optical communication systems is inevitably connected with progress in optical circuits and nanoantennas. One of the key points of this progress is the creation of elementary components of optical devices with scattering diagrams tailored for redirecting the incident light in a desired manner. Here we demonstrate theoretically and experimentally that a small, simple, spatially homogeneous dielectric subwavelength sphere with a high refractive index and low losses (as some semiconductors in the visible or near infrared region) exhibits properties allowing to utilize it as a new multifunctional element for the mentioned devices. This can be achieved by taking advantage of the coherent effects between dipolar and multipolar modes, which produce anomalous scattering effects. The effects open a new way to control the directionality of the scattered light. The directional tuning can be obtained in a practical way just by a change in the frequency of the incident wave, and/or by a well-chosen diameter of the sphere. Dielectric nanoparticles with the required optical properties in the VIS-NIR may be now readily fabricated. These particles could be an efficient alternative to the widely discussed scattering units with a more complicated design.
TL;DR: In this paper, lower bounds on mutual information (MI) of long-haul optical fiber systems for hard-decision and softdecision decoding are studied. And the advantages of using MI over the prevailing Q-factor as a figure of merit of coded optical systems are also highlighted.
Abstract: Lower bounds on mutual information (MI) of long-haul optical fiber systems for hard-decision and soft-decision decoding are studied. Ready-to-use expressions to calculate the MI are presented. Extensive numerical simulations are used to quantify how changes in the optical transmitter, receiver, and channel affect the achievable transmission rates of the system. Special emphasis is put to the use of different quadrature amplitude modulation formats, channel spacings, digital back-propagation schemes and probabilistic shaping. The advantages of using MI over the prevailing Q-factor as a figure of merit of coded optical systems are also highlighted.
TL;DR: A new modulation scheme is introduced into the VLC domain; multiband carrier-less amplitude and phase modulation (m-CAP) and its performance within the context of bandlimited systems is described.
Abstract: Visible light communications is a technology with enormous potential for a wide range of applications within next generation transmission and broadcasting technologies. VLC offers simultaneous illumination and data communications by intensity modulating the optical power emitted by LEDs operating in the visible range of the electromagnetic spectrum (~370–780 nm). The major challenge in VLC systems to date has been in improving transmission speeds, considering the low bandwidths available with commercial LED devices. Thus, to improve the spectral usage, the research community has increasingly turned to advanced modulation formats such as orthogonal frequency-division multiplexing. In this article we introduce a new modulation scheme into the VLC domain; multiband carrier-less amplitude and phase modulation (m-CAP) and describe in detail its performance within the context of bandlimited systems.
TL;DR: In this article, the authors used a single-ended photodiode and a single analog-to-digital converter to achieve the highest information spectral density (ISD) for WDM transmission in direct detection links over such distances.
Abstract: The ability to transmit signals with high information spectral density (ISD) using low-complexity and cost-effective transceivers is essential for short- and medium-haul optical communication systems Consequently, spectrally efficient direct detection transceiver-based solutions are attractive for such applications In this paper, we experimentally demonstrate the wavelength-division multiplexed (WDM) transmission of 7 $\times$ 12 GHz-spaced dispersion pre-compensated Nyquist pulse-shaped 16-QAM subcarrier modulated channels operating at a net bit rate of 24 Gb/s per channel, and achieving a net optical ISD of 20 b/s/Hz The direct detection receiver used in our experiment consisted of a single-ended photodiode and a single analog-to-digital converter The carrier-to-signal power ratio at different values of optical signal-to-noise ratio was optimized to maximize the receiver sensitivity performance The transmission experiments were carried out using a recirculating fiber loop with uncompensated standard single-mode fiber and EDFA-only amplification The maximum achieved transmission distances for single channel and WDM signals were 727 and 323 km below the bit-error ratio of ${38\times 10^{-3}}$ , respectively To the best of our knowledge, this is the highest achieved ISD for WDM transmission in direct detection links over such distances
TL;DR: An optical-fiber-nanowire hybridized UV-visible photodetector (PD) is reported, designed to allow direct integration in optical communication systems without requiring the use of couplers via fiber-welding technology.
Abstract: An optical-fiber-nanowire hybridized UV-visible photodetector (PD) is reported. The PD is designed to allow direct integration in optical communication systems without requiring the use of couplers via fiber-welding technology. The PD works in two modes: axial and off-axial illumination mode. By using the piezo-phototronic effect, the performance of the PD is enhanced/optimized by up to 718% in sensitivity and 2067% in photoresponsivity.
TL;DR: An optical signal carrying a highly correlated modulation sideband comb simultaneously injection-locks the regeneration of the optical carrier and the lower oscillation sideband in the dynamics, establishing a phase-locking between the two spectral components.
Abstract: Photonic microwave generation using period-one nonlinear dynamics of semiconductor lasers suffers from poor spectral purity. A stabilization approach based on optical modulation sideband injection locking is investigated. An optical signal carrying a highly correlated modulation sideband comb simultaneously injection-locks the regeneration of the optical carrier and the lower oscillation sideband in the dynamics, establishing a phase-locking between the two spectral components. A linewidth of below 1 Hz is therefore achieved for microwave generation up to at least 40 GHz. Because of the frequency multiplication in yielding the comb-like optical signal, only an electronic microwave reference at the tenth subharmonic or higher of the generated microwave frequency is required.
TL;DR: This proof of concept demonstration validates multi-Gbps optical downlinks from fast slewing low-Earth orbiting (LEO) spacecraft to ground assets in a manner that potentially allows seamless space to ground connectivity for future high data-rates network.
Abstract: An adaptive optics (AO) testbed was integrated to the Optical PAyload for Lasercomm Science (OPALS) ground station telescope at the Optical Communications Telescope Laboratory (OCTL) as part of the free space laser communications experiment with the flight system on board the International Space Station (ISS). Atmospheric turbulence induced aberrations on the optical downlink were adaptively corrected during an overflight of the ISS so that the transmitted laser signal could be efficiently coupled into a single mode fiber continuously. A stable output Strehl ratio of around 0.6 was demonstrated along with the recovery of a 50 Mbps encoded high definition (HD) video transmission from the ISS at the output of the single mode fiber. This proof of concept demonstration validates multi-Gbps optical downlinks from fast slewing low-Earth orbiting (LEO) spacecraft to ground assets in a manner that potentially allows seamless space to ground connectivity for future high data-rates network.