Showing papers on "Optical fiber published in 2006"

Supercontinuum generation in photonic crystal fiber

Abstract: A topical review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime. Results from numerical simulations are used to discuss the temporal and spectral characteristics of the supercontinuum, and to interpret the physics of the underlying spectral broadening processes. Particular attention is given to the case of supercontinuum generation seeded by femtosecond pulses in the anomalous group velocity dispersion regime of photonic crystal fiber, where the processes of soliton fission, stimulated Raman scattering, and dispersive wave generation are reviewed in detail. The corresponding intensity and phase stability properties of the supercontinuum spectra generated under different conditions are also discussed.

Nonlinear Fiber Optics

Abstract: Nonlinear fiber optics concerns with the nonlinear optical phenomena occurring inside optical fibers Although the field ofnonlinear optics traces its beginning to 1961, when a ruby laser was first used to generate the second-harmonic radiation inside a crystal [1], the use ofoptical fibers as a nonlinear medium became feasible only after 1970 when fiber losses were reduced to below 20 dB/km [2] Stimulated Raman and Brillouin scatterings in single-mode fibers were studied as early as 1972 [3] and were soon followed by the study of other nonlinear effects such as self- and crossphase modulation and four-wave mixing [4] By 1989, the field ofnonlinear fiber optics has advanced enough that a whole book was devoted to it [5] This book or its second edition has been translated into Chinese, Japanese, and Russian languages, attesting to the worldwide activity in the field of nonlinear fiber optics

Photonic-Crystal Fibers

Abstract: The history, fabrication, theory, numerical modeling, optical properties, guidance mechanisms, and applications of photonic-crystal fibers are reviewed

Broad-band optical parametric gain on a silicon photonic chip

Abstract: The development of silicon-compatible optical components that simultaneously amplify and process a broad range of wavelength channels is critical for future data communication technology based on photonic chips. Until now, such devices have only been able to amplify a single wavelength channel. Now, using nanoscale silicon waveguides designed for the purpose, Foster et al. have achieved broadband amplification. The key is the exploitation of a nonlinear optical effect known as four-wave mixing. This process can also be used for other all-optical functions previously only possible in extended lengths of optical fibre. Phase-matched four-wave mixing can take place with high efficiency in a suitably designed silicon waveguide — this advance could allow for the implementation of dense wavelength channels for optical processing in an all-silicon photonic chip. Developing an optical amplifier on silicon is essential for the success of silicon-on-insulator (SOI) photonic integrated circuits. Recently, optical gain with a 1-nm bandwidth was demonstrated using the Raman effect1,2,3,4,5,6,7,8,9, which led to the demonstration of a Raman oscillator10,11, lossless optical modulation12 and optically tunable slow light13. A key strength of optical communications is the parallelism of information transfer and processing onto multiple wavelength channels. However, the relatively narrow Raman gain bandwidth only allows for amplification or generation of a single wavelength channel. If broad gain bandwidths were to be demonstrated on silicon, then an array of wavelength channels could be generated and processed, representing a critical advance for densely integrated photonic circuits. Here we demonstrate net on/off gain over a wavelength range of 28 nm through the optical process of phase-matched four-wave mixing in suitably designed SOI channel waveguides. We also demonstrate wavelength conversion in the range 1,511–1,591 nm with peak conversion efficiencies of +5.2 dB, which represents more than 20 times improvement on previous four-wave-mixing efficiencies in SOI waveguides14,15,16,17. These advances allow for the implementation of dense wavelength division multiplexing in an all-silicon photonic integrated circuit. Additionally, all-optical delays18, all-optical switches19, optical signal regenerators20 and optical sources for quantum information technology21, all demonstrated using four-wave mixing in silica fibres, can now be transferred to the SOI platform.

Compact system for high-speed velocimetry using heterodyne techniques

Abstract: We have built a high-speed velocimeter that has proven to be compact, simple to operate, and fairly inexpensive. This diagnostic is assembled using off-the-shelf components developed for the telecommunications industry. The main components are fiber lasers, high-bandwidth high-sample-rate digitizers, and fiber optic circulators. The laser is a 2W cw fiber laser operating at 1550nm. The digitizers have 8GHz bandwidth and can digitize four channels simultaneously at 20GS∕s. The maximum velocity of this system is ∼5000m∕s and is limited by the bandwidth of the electrical components. For most applications, the recorded beat frequency is analyzed using Fourier transform methods, which determine the time response of the final velocity time history. Using the Fourier transform method of analysis allows multiple velocities to be observed simultaneously. We have obtained high-quality data on many experiments such as explosively driven surfaces and gas gun assemblies.

Grating Couplers for Coupling between Optical Fibers and Nanophotonic Waveguides

Abstract: Nanophotonic waveguides and components are promising for use in the large-scale integration of photonic circuits. Coupling light between nanophotonic waveguides and a single-mode fiber is an important problem and many different solutions have been proposed and demonstrated in recent years. In this paper, we discuss a grating coupler approach. Grating couplers can be placed anywhere on a circuit and can easily be integrated. We have experimentally demonstrated >30% coupling efficiency with a 1 dB bandwidth of 40 nm on standard wafers. Theoretically, the coupling efficiency can be improved to >90% using an optimized grating design and layer stack. The fabrication of the couplers in silicon-on-insulator and in indium phosphide membranes is also discussed.

Nobel Lecture: Defining and measuring optical frequencies

Abstract: Four long-running currents in laser technology met and merged in 1999--2000. Two of these were the quest toward a stable repetitive sequence of ever-shorter optical pulses and, on the other hand, the quest for the most time-stable, unvarying optical frequency possible. The marriage of UltraFast and UltraStable lasers was brokered mainly by two international teams and became exciting when a special ``designer'' microstructure optical fiber was shown to be nonlinear enough to produce ``white light'' from the femtosecond laser pulses, such that the output spectrum embraced a full optical octave. Then, for the first time, one could realize an optical frequency interval equal to the comb's lowest frequency, and count out this interval as a multiple of the repetition rate of the femtosecond pulse laser. This ``gear-box'' connection between the radio frequency standard and any/all optical frequency standards came just as Sensitivity-Enhancing ideas were maturing. The four-way Union empowered an explosion of accurate frequency measurement results in the standards field and prepares the way for refined tests of some of our cherished physical principles, such as the time-stability of some of the basic numbers in physics (e.g., the ``fine-structure'' constant, the speed of light, certain atomic mass ratios etc.), and the equivalence of time-keeping by clocks based on different physics. The stable laser technology also allows time-synchronization between two independent femtosecond lasers so exact they can be made to appear as if the source were a single laser. By improving pump/probe experiments, one important application will be in bond-specific spatial scanning of biological samples. This next decade in optical physics should be a blast.

Microstructured Optical Fibers as High-Pressure Microfluidic Reactors

Abstract: Deposition of semiconductors and metals from chemical precursors onto planar substrates is a well-developed science and technology for microelectronics. Optical fibers are an established platform for both communications technology and fundamental research in photonics. Here, we describe a hybrid technology that integrates key aspects of both engineering disciplines, demonstrating the fabrication of tubes, solid nanowires, coaxial heterojunctions, and longitudinally patterned structures composed of metals, single-crystal semiconductors, and polycrystalline elemental or compound semiconductors within microstructured silica optical fibers. Because the optical fibers are constructed and the functional materials are chemically deposited in distinct and independent steps, the full design flexibilities of both platforms can now be exploited simultaneously for fiber-integrated optoelectronic materials and devices.

Distributed quantum computation via optical fibers.

Abstract: We investigate the possibility of realizing effective quantum gates between two atoms in distant cavities coupled by an optical fiber. We show that highly reliable swap and entangling gates are achievable. We exactly study the stability of these gates in the presence of imperfections in coupling strengths and interaction times and prove them to be robust. Moreover, we analyze the effect of spontaneous emission and losses and show that such gates are very promising in view of the high level of coherent control currently achievable in optical cavities.

Optical fiber with quantum dots

Abstract: Holey optical fibers (e.g. photonic fibers, random-hole fibers) are fabricated with quantum dots disposed in the holes. The quantum dots can provide light amplification and sensing functions, for example. When used for sensing, the dots will experience altered optical properties (e.g. altered fluorescence or absorption wavelength) in response to certain chemicals, biological elements, radiation, high energy particles, electrical or magnetic fields, or thermal/mechanical deformations. Since the dots are disposed in the holes, the dots interact with the evanescent field of core-confined light. Quantum dots can be damaged by high heat, and so typically cannot be embedded within conventional silica optical fibers. In the present invention, dots can be carried into the holes by a solvent at room temperature. The present invention also includes solid glass fibers made of low melting point materials (e.g. phosphate glass, lead oxide glass) with embedded quantum dots.

Fundamentals of optical waveguides

Abstract: Preface 1. Wave Theory of Optical Waveguides 2. Planar Optical Waveguides 3. Optical Fibers 4. Couple Mode Theory 5. Nonlinear Optical Effects in Optical Fibers 6. Finite Element Method 7. Beam Propagation Method 8. Staircase Concatention Method 9. Planar Lightwave Circuits 10. Theorems and Formulas Appendix

Fiber optic position and shape sensing device and method relating thereto

Abstract: The present invention is directed toward a fiber optic position and shape sensing device and the method of use. The device comprises an optical fiber means. The optical fiber means comprises either at least two single core optical fibers or a multicore optical fiber having at least two fiber cores. In either case, the fiber cores are spaced apart such that mode coupling between the fiber cores is minimized. An array of fiber Bragg gratings are disposed within each fiber core and a frequency domain reflectometer is positioned in an operable relationship to the optical fiber means. In use, the device is affixed to an object. Strain on the optical fiber is measured and the strain measurements correlated to local bend measurements. Local bend measurements are integrated to determine position and/or shape of the object.

Large-pitch kagome-structured hollow-core photonic crystal fiber

Abstract: We report the fabrication and characterization of a new type of hollow-core photonic crystal fiber based on large-pitch (∼12μm) kagome lattice cladding. The optical characteristics of the 19-cell, 7-cell, and single-cell core defect fibers include broad optical transmission bands covering the visible and near-IR parts of the spectrum with relatively low loss and low chromatic dispersion, no detectable surface modes and high confinement of light in the core. Various applications of such a novel fiber are also discussed, including gas sensing, quantum optics, and high harmonic generation.

Fiber-optic scanning two-photon fluorescence endoscope.

Abstract: We report on the development of a miniature, flexible, fiber-optic scanning endoscope for two-photon fluorescence imaging. The endoscope uses a tubular piezoelectric actuator for achieving two-dimensional beam scanning and a double-clad fiber for delivery of the excitation light and collection of two-photon fluorescence. Real-time imaging of fluorescent beads and cancer cells has been performed.

Fiber optics opens window on stream dynamics

Abstract: A new approach to monitoring surface waters using distributed fiber optic temperature sensing is presented, allowing resolutions of temperature of 0.01°C every meter along a fiber optic cable of up to 10,000 m in length. We illustrate the potential of this approach by quantifying both stream temperature dynamics and groundwater inflows to the Maisbich, a first-order stream in Luxembourg (49°47?N, 6°02?E). The technique provides a very rich dataset, which may be of interest to many types of environmental research, notably that of stream ecosystems.

Low-loss subwavelength plastic fiber for terahertz waveguiding.

Abstract: We report a simple subwavelength-diameter plastic wire, similar to an optical fiber, for guiding a terahertz wave with a low attenuation constant. With a large wavelength-to-fiber-core ratio, the fractional power delivered inside the lossy core is reduced, thus lowering the effective fiber attenuation constant. In our experiment we adopt a polyethylene fiber with a 200 µm diameter for guiding terahertz waves in the frequency range near 0.3 THz in which the attenuation constant is reduced to of the order of or less than 0.01 cm−1. Direct free-space coupling efficiency as high as 20% can be achieved by use of an off-axis parabolic mirror. Furthermore, all the plastic wires are readily available, with no need for complex or expensive fabrication.

Arbitrary-bandwidth Brillouin slow light in optical fibers

Abstract: Brillouin slow light in optical fibers is a promising technique for the development of all-optical buffers to be used in optical routers. The main drawback of this technique up to now has been its narrow bandwidth, normally restricted to 35 MHz in conventional single-mode optical fibers. In this paper we demonstrate experimentally that Brillouin slow light with an arbitrary large bandwidth can be readily obtained in conventional optical fibers using a simple and inexpensive pump spectral broadening technique. In our experiments, we show the delaying of 2.7 ns pulses over slightly more than one pulse length with only some residual broadening (<25%) of the pulse width. We see no limit to extend this technique to the delaying of GHz-bandwidth signals.

All-fiber multimode-interference-based refractometer sensor: proposal and design

Abstract: A novel all-fiber refractometer sensor is proposed, which is based on multimode interference in the multimode fiber core section sandwiched between two single-mode fibers. A wide-angle beam propagation method in the cylindrical coordinate is employed as the modeling tool for simulation and design of the proposed refractometer sensor. The design for a refractometer is presented that shows that the refractometer would have an estimated resolution of 5.4 x 10(-5) for refractive indices from 1.33 to 1.45 and of 3.3 x 10(-5) for refractive indices from 1.38 to 1.45 through the choice of an appropriate length of the multimode fiber core section.

Fiber-optic temperature sensor based on interference of selective higher-order modes

Abstract: A fiber-optic temperature sensor based on the interference of selective higher-order modes in circular optical fibers is described. The authors demonstrate that by coupling the LP01 mode in a standard single-mode fiber to the LP0m modes in a multimode fiber, and utilizing the interference of the higher-order modes, a fiber-optic temperature sensor which has an extremely simple structure and is suitable for high-temperature measurements can be constructed. The sensing principle, temperature measurement experiments, and results are presented.

Stimulated Brillouin scattering from multi-GHz-guided acoustic phonons in nanostructured photonic crystal fibres

Abstract: Wavelength-scale periodic microstructuring dramatically alters the optical properties of materials. An example is glass photonic crystal fibre1 (PCF), which guides light by means of a lattice of hollow micro/nanochannels running axially along its length. In this letter, we explore stimulated Brillouin scattering in PCFs with subwavelength-scale solid silica glass cores. The large refractive-index difference between air and glass allows much tighter confinement of light than is possible in all-solid single-mode glass optical fibres made using conventional techniques. When the silica-air PCF has a core diameter of around 70% of the vacuum wavelength of the launched laser light, we find that the spontaneous Brillouin signal develops a highly unusual multi-peaked spectrum with Stokes frequency shifts in the 10-GHz range. We attribute these peaks to several families of guided acoustic modes each with different proportions of longitudinal and shear strain, strongly localized to the core2,3. At the same time, the threshold power for stimulated Brillouin scattering4 increases fivefold. The results show that Brillouin scattering is strongly affected by nanoscale microstructuring, opening new opportunities for controlling light—sound interactions in optical fibres.

Subwavelength waveguide grating for mode conversion and light coupling in integrated optics.

Abstract: We propose a new method for mode conversion and coupling between an optical fiber and a sub-micrometer waveguide using a subwavelength grating (SWG) with a period less than the 1st order Bragg period. The coupler principle is based on gradual modification of the waveguide mode effective index by the SWG effect that at the same time frustrates diffraction and minimizes reflection loss. We demonstrate the proposed principle by two-dimensional Finite Difference Time Domain (FDTD) calculations of various SWG structures designed for the silicon-on-insulator (SOI) platform with a Si core thickness of 0.3 microm. We found a coupling loss as small as 0.9 dB for a 50 microm-long SWG device and low excess loss due to fiber misalignment, namely 0.07 dB for a transverse misalignment of +/-1 microm, and 0.24 dB for an angular misalignment of +/-2 degrees. Scaling of the SWG coupler length down to 10 microm is also reported on an example of a 2D slab waveguide coupling structure including aspect ratio dependent etching and micro-loading effects. Finally, advantages of the proposed coupling principle for fabricating 3D coupling structures are discussed.

Medical apparatus system having optical fiber load sensing capability

Abstract: An apparatus and method for diagnosis or treatment of a vessel or organ. The apparatus includes a deformable body such as a catheter having a tissue ablation end effector and an irrigation channel in fluid communication therewith. At least two sensors are disposed within a distal extremity of the deformable body, the sensors being responsive to a wave in a specified range of frequency to detect deformations resulting from a contact force applied to the distal extremity. A microprocessor can be operatively coupled with the sensors to receive outputs therefrom, the microprocessor being configured to resolve a multi-dimensional force vector corresponding to the contact force. In one embodiment, the sensors are fiber Bragg grating sensors, and the wave is injected into the fiber Bragg grating strain sensors from a laser diode.

Distributed strain measurement with millimeter-order spatial resolution based on Brillouin optical correlation domain analysis

Abstract: Distributed strain sensing with millimeter-order spatial resolution is demonstrated in optical fibers based on Brillouin optical correlation domain analysis. A novel beat lock-in detection scheme is introduced to suppress background noises coming from the reflection of Brillouin pump waves. The Brillouin frequency shifts of 3 mm fiber sections are successfully measured with a theoretical spatial resolution of 1.6 mm.

Photonic microwave tunable single-bandpass filter based on a Mach-Zehnder interferometer

Abstract: The authors present the theoretical analysis and experimental demonstration of a novel single-bandpass tunable microwave filter. The filter is based on a broadband optical source and a fiber Mach-Zehnder interferometer and shows a high Q factor over a tuning range of 5-17 GHz. A generalized analysis considering that the optical signal propagates along optical delay lines with a dispersion slope different from zero is presented.

Mid-infrared supercontinuum generation to 4.5 μm in ZBLAN fluoride fibers by nanosecond diode pumping

Abstract: A mid-infrared supercontinuum (SC) is generated in ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF...) fluoride fibers from amplified nanosecond laser diode pulses with a continuous spectrum from approximately 0.8 microm to beyond 4.5 microm. The SC has an average power of approximately 23 mW, a pump-to-SC power conversion efficiency exceeding 50%, and a spectral power density of approximately -20 dBm/nm over a large fraction of the spectrum. The SC generation is initiated by the breakup of nanosecond laser diode pulses into femtosecond pulses through modulation instability, and the spectrum is then broadened primarily through fiber nonlinearities in approximately 2-7 m lengths of ZBLAN fiber. The SC long-wavelength edge is consistent with the intrinsic ZBLAN material absorption.

Light propagation with ultralarge modal areas in optical fibers.

Abstract: We demonstrate robust single-transverse-mode light propagation in higher-order modes of a fiber, with effective area Aeff ranging from 2100 to 3200 μm2. These modes are accessed using long-period fiber gratings that enable higher-order-mode excitation over a bandwidth of 94 mm with greater than 99% of the light in the desired mode. The fiber is designed such that the effective index separation between modes is always large, hence minimizing in-fiber mode mixing and enabling light propagation over lengths as large as 12 m, with bends down to 4.5 cm radii. The modal stability increases with mode order, suggesting that Aeff of this platform is substantially scalable.

Cost-effective assembly of a basic fiber-optic hydrophone for measurement of high-amplitude therapeutic ultrasound fields.

Abstract: Design considerations, assembly details, and operating procedures of one version of a cost-effective basic fiber-optic probe hydrophone (FOPH) are described in order to convey practical information to groups interested in constructing a similar device. The use of fiber optic hydrophones can overcome some of the limitations associated with traditional polyvinylidene difluoride (PVDF) hydrophones for calibration of acoustic fields. Compared to standard PVDF hydrophones, FOPH systems generally have larger bandwidths, enhanced spatial resolution, reduced directionality, and greater immunity to electromagnetic interference, though they can be limited by significantly lower sensitivities. The FOPH system presently described employs a 100-microm multimode optical fiber as the sensing element and incorporates a 1-W laser diode module, 2 x 2 optical coupler, and general-purpose 50-MHz silicon p-i-n photodetector. Wave forms generated using the FOPH system and a reference PVDF hydrophone are compared, and intrinsic and substitution methods for calibrating the FOPH system are discussed. The voltage-to-pressure transfer factor is approximately 0.8 mV/MPa (-302 dB re 1 V/microPa), though straightforward modifications to the optical components in the FOPH system are discussed that can significantly increase this value. Recommendations are presented to guide the choice of optical components and to provide practical insight into the routine usage of the FOPH device.

Fiber-optical parametric amplifier with 70-dB gain

Abstract: A record optical fiber gain of 70 dB was obtained in a continuous-wave pumped fiber-optical parametric amplifier. Limitations due to saturation effects from amplified spontaneous emission (ASE) and due to stimulated Brillouin scattering in this unidirectional amplifier are discussed. The spectral density of ASE was up to 180 mW/nm in agreement with theoretical expectations, illustrating the possible use as a high brightness optical noise source

Observation of Backward Pulse Propagation Through a Medium with a Negative Group Velocity

Abstract: The nature of pulse propagation through a material with a negative value of the group velocity has been mysterious, as simple models seem to predict that pulses will propagate "backward" through such a material. Using an erbium-doped optical fiber and measuring the time evolution of the pulse intensity at many points within the fiber, we demonstrate that the peak of the pulse does propagate backward inside the fiber, even though the energy flow is always in the forward direction.

Highly sensitive long-period fiber-grating strain sensor with low temperature sensitivity.

Abstract: A long-period fiber-grating sensor with a high strain sensitivity of −7.6 pm/μe and a low temperature sensitivity of 3.91 pm/°C is fabricated by use of focused CO2 laser beam to carve periodic grooves on a large- mode-area photonic crystal fiber. Such a strain sensor can effectively reduce the cross-sensitivity between strain and temperature, and the temperature-induced strain error obtained is only 0.5 μe/°C without using temperature compensation.