Topic
Optical microcavity
About: Optical microcavity is a research topic. Over the lifetime, 2599 publications have been published within this topic receiving 72125 citations. The topic is also known as: optical microcavities.
Papers published on a yearly basis
Papers
More filters
TL;DR: A silicon-based two-dimensional photonic-crystal slab is used to fabricate a nanocavity with Q = 45,000 and V = 7.0 × 10-14 cm3; the value of Q/V is 10–100 times larger than in previous studies, underlying the realization that light should be confined gently in order to be confined strongly.
Abstract: Photonic cavities that strongly confine light are finding applications in many areas of physics and engineering, including coherent electron-photon interactions, ultra-small filters, low-threshold lasers, photonic chips, nonlinear optics and quantum information processing. Critical for these applications is the realization of a cavity with both high quality factor, Q, and small modal volume, V. The ratio Q/V determines the strength of the various cavity interactions, and an ultra-small cavity enables large-scale integration and single-mode operation for a broad range of wavelengths. However, a high-Q cavity of optical wavelength size is difficult to fabricate, as radiation loss increases in inverse proportion to cavity size. With the exception of a few recent theoretical studies, definitive theories and experiments for creating high-Q nanocavities have not been extensively investigated. Here we use a silicon-based two-dimensional photonic-crystal slab to fabricate a nanocavity with Q = 45,000 and V = 7.0 x 10(-14) cm3; the value of Q/V is 10-100 times larger than in previous studies. Underlying this development is the realization that light should be confined gently in order to be confined strongly. Integration with other photonic elements is straightforward, and a large free spectral range of 100 nm has been demonstrated.
2,715 citations
TL;DR: A laser cavity formed from a single defect in a two-dimensional photonic crystal is demonstrated and pulsed lasing action has been observed at a wavelength of 1.5 micrometers from optically pumped devices with a substrate temperature of 143 kelvin.
Abstract: A laser cavity formed from a single defect in a two-dimensional photonic crystal is demonstrated. The optical microcavity consists of a half wavelength–thick waveguide for vertical confinement and a two-dimensional photonic crystal mirror for lateral localization. A defect in the photonic crystal is introduced to trap photons inside a volume of 2.5 cubic half-wavelengths, approximately 0.03 cubic micrometers. The laser is fabricated in the indium gallium arsenic phosphide material system, and optical gain is provided by strained quantum wells designed for a peak emission wavelength of 1.55 micrometers at room temperature. Pulsed lasing action has been observed at a wavelength of 1.5 micrometers from optically pumped devices with a substrate temperature of 143 kelvin.
2,310 citations
TL;DR: This work reports a substantially different approach to comb generation, in which equally spaced frequency markers are produced by the interaction between a continuous-wave pump laser of a known frequency with the modes of a monolithic ultra-high-Q microresonator via the Kerr nonlinearity.
Abstract: Optical frequency combs provide equidistant frequency markers in the infrared, visible and ultraviolet, and can be used to link an unknown optical frequency to a radio or microwave frequency reference. Since their inception, frequency combs have triggered substantial advances in optical frequency metrology and precision measurements and in applications such as broadband laser-based gas sensing and molecular fingerprinting. Early work generated frequency combs by intra-cavity phase modulation; subsequently, frequency combs have been generated using the comb-like mode structure of mode-locked lasers, whose repetition rate and carrier envelope phase can be stabilized. Here we report a substantially different approach to comb generation, in which equally spaced frequency markers are produced by the interaction between a continuous-wave pump laser of a known frequency with the modes of a monolithic ultra-high-Q microresonator via the Kerr nonlinearity. The intrinsically broadband nature of parametric gain makes it possible to generate discrete comb modes over a 500-nm-wide span (approximately 70 THz) around 1,550 nm without relying on any external spectral broadening. Optical-heterodyne-based measurements reveal that cascaded parametric interactions give rise to an optical frequency comb, overcoming passive cavity dispersion. The uniformity of the mode spacing has been verified to within a relative experimental precision of 7.3 x 10(-18). In contrast to femtosecond mode-locked lasers, this work represents a step towards a monolithic optical frequency comb generator, allowing considerable reduction in size, complexity and power consumption. Moreover, the approach can operate at previously unattainable repetition rates, exceeding 100 GHz, which are useful in applications where access to individual comb modes is required, such as optical waveform synthesis, high capacity telecommunications or astrophysical spectrometer calibration.
1,950 citations
Journal Article•
TL;DR: Optical microcavities confine light to small volumes by resonant recirculation as discussed by the authors, and are indispensable for a wide range of applications and studies, such as long-distance transmission of data over optical fibres; they also ensure narrow spot-size laser read/write beams in CD and DVD players.
Abstract: Optical microcavities confine light to small volumes by resonant recirculation. Devices trased on optical microcavities are already indispensable for a wide range of applications and studies, For example, microcavities made of active III-V semiconductor materials control laser emission spectra to enable long-distance transmission of data over optical fibres; they also ensure narrow spot-size laser read/write beams in CD and DVD players. In quantum optical devices, mocrocavities can coax atoms or quantum dots to emit spontaneous photons In a desired direction or can provide an environment where dissipative mechanhms such as spontaneous emission are overcome so that quantum entanglement of radiation and matter is possible. Applications of these remarkable devices are as diverse as their geometrical and resonant properties.
1,855 citations
TL;DR: The observation of strong coupling of a single two-level solid-state system with a photon, as realized by a single quantum dot in a semiconductor microcavity, may provide a basis for future applications in quantum information processing or schemes for coherent control.
Abstract: Cavity quantum electrodynamics, a central research field in optics and solid-state physics, addresses properties of atom-like emitters in cavities and can be divided into a weak and a strong coupling regime. For weak coupling, the spontaneous emission can be enhanced or reduced compared with its vacuum level by tuning discrete cavity modes in and out of resonance with the emitter. However, the most striking change of emission properties occurs when the conditions for strong coupling are fulfilled. In this case there is a change from the usual irreversible spontaneous emission to a reversible exchange of energy between the emitter and the cavity mode. This coherent coupling may provide a basis for future applications in quantum information processing or schemes for coherent control. Until now, strong coupling of individual two-level systems has been observed only for atoms in large cavities. Here we report the observation of strong coupling of a single two-level solid-state system with a photon, as realized by a single quantum dot in a semiconductor microcavity. The strong coupling is manifest in photoluminescence data that display anti-crossings between the quantum dot exciton and cavity-mode dispersion relations, characterized by a vacuum Rabi splitting of about 140 microeV.
1,809 citations